• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.6
• /
• pp.279-288
• /
• 2017

Heat generation rate in a telecommunication cabinet increases due to the continued usage of mobile devices. Insufficient removal of heat intensifies the cabinet temperature, resulting in the malfunction of electronic devices. In this study, we assessed both aluminum and plastic heat exchangers used for cooling of the telecommunication cabinet, and compared the results against theoretical predictions. The aluminum heat exchanger was composed of counter flow parallel channels of 4.5 mm pitch, and the plastic heat exchangers were composed of cross flow triangular channels of 2.0 mm pitch. Samples were made by installing two plastic heat exchangers in both series and parallel. Results showed that the heat transfer rate was highest for the series cross flow heat exchanger, and was least for the aluminum heat exchanger. The temperature efficiency of the series cross flow heat exchanger was 59% greater than that of the aluminum heat exchanger, and was 4.3% greater than that of the parallel cross flow heat exchanger. In contrast, the pressure drop of the parallel cross flow heat exchanger was significantly lower than other samples. The heat exchange efficiency was also the largest for the parallel cross flow heat exchanger. The theoretical analysis predicted the temperature efficiency to be within 3.3%, and the pressure drop within 6.1%.

• Journal of the Institute of Convergence Signal Processing
• /
• v.16 no.1
• /
• pp.1-8
• /
• 2015

In many image processing tasks, connected component labeling (CCL) is performed to extract regions of interest. CCL was usually done in a sequential fashion when image resolution was relatively low and there are small number of input channels. As image resolution gets higher up to HD or Full HD and as the number of input channels increases, sequential CCL is too time-consuming to be used in real time applications. To cope with this situation, parallel CCL framework was introduced where multiple cores are utilized simultaneously. Several parallel CCL methods have been proposed in the literature. Among them are NSZ label equivalence (NSZ-LE) method[1], modified 8 directional label selection (M8DLS) method[2], and HYBRID1 method[3]. Soh [3] showed that HYBRID1 outperforms NSZ-LE and M8DLS, and argued that HYBRID1 is by far the best. In this paper we propose an improved hybrid parallel CCL algorithm termed as HYBRID2 that hybridizes M8DLS with label backtracking (LB) and show that it runs around 20% faster than HYBRID1 for various kinds of images.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.2B
• /
• pp.125-136
• /
• 2002

It is very important to acquire the synchronization in a intercell asynchronous WCDMA system, and it is carried out through the three-step cell search process. The cell search can operate in a stepwise parallel manner, where each step works in pipelined operation, to reduce the cell search time. In case that the execution time is set to be the same in each step, excessive accumulations will be caused in both step 1 and step 3, because step 2 should take at least one frame for its processing. In general, the effect of post-detection integration becomes saturated as the number of the accumulations increases. Therefore, the stepwise parallel scheme does not give much enhancement. In this paper, the performance of the stepwise parallel processing for cell search in WCDMA system is analyzed over Rayleigh fading channels. Through the analysis, the effect of cell search parameters such as the number of accumulations in each step and the power ratio allocated among channels is investigated. In addition, the performance of the stepwise parallel cell search is improved by adjusting the execution time appropriately for each step and is compared with that of the conventional stepwise serial processing.

• Journal of the Korean Electrochemical Society
• /
• v.9 no.4
• /
• pp.170-177
• /
• 2006

Optimum design of flow channel in the separation plate of Proton Exchange Membrane Fuel Cell is very prerequisite to reduce concentration over potential at high current region and remove the water generated in cathode effectively. In this paper, fully 3 dimensional computational model which solves anode and cathode flow fields simultaneously is developed in order to compare the performance of fuel cell with parallel and interdigitated flow channels. Oxygen and water concentration and pressure drop are calculated and i-V performance characteristics are compared between flows with two flow channels. Results show that performance of fuel cell with interdigitated flow channel is hi민or than that with parallel flow channel at high current region because hydrogen and oxygen in interdigitated flow channel are transported to catalyst layer effectively due to strong convective transport through gas diffusion layer but pressure drop is larger than that in parallel flow channel. Therefore Trade-off between power gain and pressure loss should be considered in design of fuel cell with interdigitated flow channel.

• Journal of IKEEE
• /
• v.11 no.4
• /
• pp.198-204
• /
• 2007

For parallel and serially concatenated trellis coded modulation (TCM), improved iterative decoding schemes with a simple mechanism are proposed and their performances are compared with those of conventional decoding schemes. Simulation results have shown that the proposed schemes have provided a considerable decoding gain in additive white Gaussian noise (AWGN) channels and Rayleigh fading channels, even if they can be implemented by a simple modification of conventional decoding algorithms.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.5
• /
• pp.640-651
• /
• 2000

For the heat and fluid flow analyses of a parallel flow heat exchanger, an improved model considering the effect of flat tube with micro-channels is proposed. The effect of flow distribution on the thermal performance of a heat exchanger is numerically investigated. The flow distribution is examined by varying geometrical parameters, i.e., the position of the separators and the inlet/outlet, and the aspect ratio of micro-channels of the heat exchanger. The flow nonuniformities along the paths of the heat exchanger are proposed and observed to evaluate the thermal performance of the heat exchanger. The optimization using ALM method has been accomplished by minimizing the flow nonuniformity. It is found that the heat transfer rate of the optimized model is increased by 6.0% of that of the reference heat exchanger model, and the pressure drop by 0.4%

• Journal of Communications and Networks
• /
• v.5 no.1
• /
• pp.1-6
• /
• 2003

In this paper, we extend the derivation of the iterative soft-output Viterbi algorithm (SOVA) for partial response (PR) channels, and modify its decoding process such that it works consistently for arbitrary high code rates, e.g., rate 64/65. We show that the modified SOVA always outperforms the conventional SOVA that appears in the literature with a significant difference for high code rates. It also offers a significant cut down in the trace-back computations. We further examine its performance for parallel and serial concatenated codes on a precoded Class IC partial response (PR4) channel. Code rates of the form $\frac{k_0}{k_0+1}$($k_0$ = 4, 8, and 64) are considered. Our simulations indicate that the loss suffered by the modified SOVA, relative to the APP algorithm, is consistent for all code rates and is at most 1.2 dB for parallel concatenations and at most 1.6 dB for serial concatenations at $P_b$ = $10^{-5}$.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1281-1285
• /
• 2004

There are numerous emotions in the human world. Human expresses and recognizes their emotion using various channels. The example is an eye, nose and mouse. Particularly, in the emotion recognition from facial expression they can perform the very flexible and robust emotion recognition because of utilization of various channels. Hybrid-feature extraction algorithm is based on this human process. It uses the geometrical feature extraction and the color distributed histogram. And then, through the independently parallel learning of the neural-network, input emotion is classified. Also, for the natural classification of the emotion, advancing two-dimensional emotion space is introduced and used in this paper. Advancing twodimensional emotion space performs a flexible and smooth classification of emotion.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.113-116
• /
• 2003

In this paper, we propose a dynamic parallel channel allocation mechanism that dynamically controls total number of allocation channels of each subscriber to effectively service user bandwidth demands while high utilization and fairness are guaranteed in WDM based optical access networks. The logical performance gain of statistical multiplexing by dynamic channel allocation is validated with analytic method as well as simulations. We also introduce the adaptive padding scheme in order to efficiently distribute forwarded frames to aggregated multi-link channels which are formed by parallel channel allocation mechanism. The proposed scheme shows the performance enhancement by minimizing unnecessary padding size and the processing time.

• ETRI Journal
• /
• v.37 no.5
• /
• pp.906-916
• /
• 2015

High-speed I/O channels require adaptive techniques to optimize the settings for filter tap weights at decision feedback equalization (DFE) read channels to compensate for channel inter-symbol interference (ISI) and crosstalk from multiple adjacent channels. Both ISI and crosstalk tend to vary with channel length, process, and temperature variations. Individually optimizing parameters such as those just mentioned leads to suboptimal solutions. We propose a joint optimization technique for crosstalk cancellation (XTC) at DFE to compensate for both ISI and XTC in high-speed I/O channels. The technique is used to compensate for between 15.7 dB and 19.7 dB of channel loss combined with a variety of crosstalk strengths from $60mV_{p-p}$ to $180mV_{p-p}$ adaptively, where the transmit non-return-to-zero signal amplitude is a constant $500mV_{p-p}$.