• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.6 no.3
• /
• pp.216-225
• /
• 1994

By use of laboratory experiment data set for an elliptic shoal by Berkhoff et al. (1982), both accuracy and Performance tests of numerical results between PCGM (Preconditioned Conjugate Gradient Method) and PA(Parabolic Approximation) are compared. Although both results show good agreement with the experimental data the PA model gives better reproduction of the relatively high amplitudes in the section 4-5 downwave of the shoal, in comparison with the PCGM. The PA model has been proved to be a useful tool for predicting wave transformationsin large shallow water region, but it can be applied only to the case of negligible reflection. On the other hand, there is a need to improve the computational efficiency of the PCGM model which is a finite difference scheme directly derived from the mild slope equation and can handle reflection. By taking the results of th PA model as an input data of the PCGM, the CPU time can be reduced by about 40%.

• Journal of Navigation and Port Research
• /
• v.41 no.5
• /
• pp.345-352
• /
• 2017

Recently, a new port reserves deep water depth for safe navigation and mooring, following the trend of larger ship building. Larger port facilities include long and huge breakwaters, and mainly adopt vertical type considering low construction cost. A vertical breakwater creates stem waves combining inclined incident waves and reflected waves, and this causes maneuvering difficulty to the passing vessels, and erosion of shoreline with additional damages to berthing facilities. Thus, in this study, the researchers have investigated the response of stem waves at the vertical breakwater near the entrance channel and applied numerical models, which are commonly used for the analysis of wave response at the harbor design. The basic equation composing models here adopted both the linear parabolic approximation adding the nonlinear dispersion relationship and nonlinear parabolic approximation adding a linear dispersion relationship. To analyze the applicability of both models, the research compared the numerical results with the existing hydraulic model results. The gap of serial breakwaters and aligned angles caused more complicated stem wave generation and secondary stem wave was found through the breakwater gap. Those analyzed results should be applied to ship handling simulation studies at the approaching channels, along with the mooring test.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4B
• /
• pp.405-412
• /
• 2006

This study investigates the characteristics of stem waves along a vertical wall generated by obliquely incident monochromatic waves through laboratory experiments conducted in a wave basin and numerical simulations using parabolic approximation equations. The investigation is focused on the nonlinear effect of incident waves on the propagation characteristics of stem waves. Numerical results are compared with laboratory measurements and good agreements are obtained. The main results of this study show that the normalized stem wave height along the wall decreases and the stem width increases as the angle of incident waves decreases or the nonlinearity of the incident waves increases.

• Journal of applied mathematics & informatics
• /
• v.16 no.1_2
• /
• pp.165-181
• /
• 2004

Based on Landau-type transformation, a Stefan problem with non-linear free boundary condition is transformed into a system consisting of parabolic equation and the ordinary differential equations. Semidiscrete approximations are constructed. Optimal orders of convergence of semidiscrete approximation in $L_2$, $H^1$ and $H^2$ normed spaces are derived.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.4
• /
• pp.451-456
• /
• 2014

A compact model of a depletion-mode silicon-nanowire (Si-NW) pH sensor is proposed. This drain current model is obtained from the Pao-Sah integral and the continuous charge-based model, which is derived by applying the parabolic potential approximation to the Poisson's equation in the cylindrical coordinate system. The threshold-voltage shift in the drain-current model is obtained by solving the nonlinear Poisson-Boltzmann equation for the electrolyte. The simulation results obtained from the proposed drain-current model for the Si-NW field-effect transistor (SiNWFET) agree well with those of the three-dimensional (3D) device simulation, and those from the Si-NW pH sensor model also agree with the experimental data.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.7
• /
• pp.339-345
• /
• 2006

We suggest new 2D two-way Parabolic equation algorithm for multiple scattering. Our method is based on the successive performance of the single scattering approach. First. as the single scattering algorithm, the reflected and transmitted fields are calculated at the vertical interface of a range independent sector. Then. the reflected field is saved and the transmitted field Propagated to the next vertical interface with the split-step Pade method. After one step ends, the same Process is repeatedly performed with the change of the Propagation direction until the reflected field at the vertical interface is close to zero. Final incoming and outgoing fields are obtained as the sum of the wave fields obtained for each step. Our algorithm is relatively simple for the numerical implementation and requires less computational resources than the existing algorithm for multiple scattering

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.3
• /
• pp.619-633
• /
• 1994

A wave deformation model for general purpose combined refraction, diffraction, and breaking is developed in the shallow water. A parabolic approximation equation considered a higher order diffraction term is derived from the previous mild slope equation. A wave energy dissipation term due to bottom friction and breaking is introduced from the turbulence model. The Crank-Nicoloson implicit scheme is used in the numerical calculation, then the solutions are compared with the various hydraulic experiment data in the circular, the elliptic shoal, and the surf zone. The wave height decay in the surf zone is sensitively affected by the incident wave steepness, and the wave height variation around the elliptic shoal is well explained by the non-linear dispersion relation and the wave energy dissipation term. The model is also applied to a field coastal area and reasonable results are obtained.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.19 no.4
• /
• pp.19-29
• /
• 1982

Galerkin's finite element method is applied to a two-dimensional heat convection-diffusion problem arising in the hydrodynamic lubrication of thrust bearings used in naval vessels. A parabolized thermal energy equation for the lubricant, and thermal diffusion equations for both bearing pad and the collar are treated together, with proper juncture conditions on the interface boundaries. it has been known that a numerical instability arises when the classical Galerkin's method, which is equivalent to a centered difference approximation, is applied to a parabolic-type partial differential equation. Probably the simplest remedy for this instability is to use a one-sided finite difference formula for the first derivative term in the finite difference method. However, in the present coupled heat convection-diffusion problem in which the governing equation is parabolized in a subdomain(Lubricant), uniformly stable numerical solutions for a wide range of the Peclet number are obtained in the numerical test based on Galerkin's classical finite element method. In the present numerical convergence errors in several error norms are presented in the first model problem. Additional numerical results for a more realistic bearing lubrication problem are presented for a second numerical model.

• Journal of Korean Port Research
• /
• v.12 no.2
• /
• pp.281-290
• /
• 1998

The propagation of water waves over irregular bottom bathymetry and around islands involves many process-shoaling, refraction, energy dissipation and diffraction. Numerical model in this study is developed with the mild slope equation to investigate wave transformation in water of varying depth and combined waves and a current. The method used is splitting method and minimax approximation. The numerical method used in this study is Crank-Nicolson scheme in the FDM. This model is applied to Vincent shoal and compared with laboratory experimental data. The results agreed well with laboratory data. Current effect is considered in this study. This model can be used for the estimation of rip current in the slowly varying topography.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.10
• /
• pp.3371-3380
• /
• 1996

Low resolution spectral modeling of water vapor is carried out by applying the weighted-sum-of-gray-gases model (WSGGM) to a narrow band. For a given narrow band, focus is placed on proper modeling of gray gas absorption coefficients vs. temeprature relation used for any solution methods for the Radiative Transfer Equation(RTE). Comparison between the modeled emissivity and the "true" emissivity obtained from a high temperatue statistical narrow band parameters is made ofr the total spectrum as well as for a few typical narrow bands. Application of the model to nonuniform gas layers is also made. Low resolution spectral intensities at the boundary are obtained for uniform, parabolic and boundary layer type temeprature profiles using the obtained for uniform, parabolic and boundary layer type temperature profiles using the obtained WSGGM's with 9 gray gases. The results are compared with the narrow band spectral intensities as obtained by a narrow band model-based code with the Curtis-Godson approximation. Good agreement is found between them. Local heat source strength and total wall heat flux are also compared for the cases of Kim et al, which again gives promising agreement.