• 제목/요약/키워드: panel evaluation

검색결과 760건 처리시간 0.031초

기준 직물 제시와 비제시 방법에 따른 소모직물의 촉감 평가 비교 (Comparison of the Tactile Sensation of Worsted Fabrics With and Without Reference)

  • 김동옥;김은애
    • 한국의류학회지
    • /
    • 제28권3_4호
    • /
    • pp.452-459
    • /
    • 2004
  • The purpose of this study was to evaluate the effect of reference fabric for the tactile sensation of worsted fabrics. As specimens, 32 worsted fabrics for spring/fall suits were selected. A series of subjective evaluation for roughness, harshness, coarseness, smoothness, warmth, bulkiness and softness were performed with 20 trained panels. The panels were selected by the test of consistency and trained for 3 weeks to enhance the reproducibility and consistency. Subjective evaluation was performed using 9 points Semantic Differential Scales with and without reference fabric. Results showed that the sensations were very similar between the results for the test of with or without reference. However the standard deviations of ratings for the with-reference were much less than that of without-reference which means the use of reference fabric can reduce the subjective error or can reduce the number of panels to test.

Numerical Evaluation of the Strut Interference and the 3-Run Image method for Wind Tunnel Tests

  • Chang, Byeong-Hee
    • International Journal of Aeronautical and Space Sciences
    • /
    • 제1권2호
    • /
    • pp.17-21
    • /
    • 2000
  • In order to correct the strut interference in wind tunnel tests, image methods are conventionally used. Because of their excessive extra runs, some alternatives have been tried to reduce the extra runs. In this study, these alternatives were reviewed and checked by the strut interference evaluation with the panel code, CMARC. The present work shows that the strut interference is free from neither model configuration nor model attitude. This dependency makes the alternatives to the image method unfeasible. The 3-run image method was also evaluated. It worked well even for the exaggerated windshield. At this point, reducing the image runs by neglecting parameters affecting minor influence would be best.

  • PDF

미래 기후변화를 고려한 GIS 기반의 댐유역 유사량 평가 (The Evaluation of Sediment Yield of Dam-basin considering Future Climate Change in GIS Environment)

  • 이근상;최연웅;조기성
    • 한국측량학회:학술대회논문집
    • /
    • 한국측량학회 2010년 춘계학술발표회 논문집
    • /
    • pp.383-385
    • /
    • 2010
  • This study analyzed the change of flowout and suspend solid in Andong and Imha basin according to the climate change to develop evaluation index about turbid water occurrence possibility and to support the countermeasures for turbid water management using GIS-based Soil and Water Assessment Tools (SWAT). MIROC3.2 hires model values of A1B climate change scenario that were supplied by Intergovernmental Panel on Climate Change (IPCC) were applied to future climage change data. Precipitation and temperature were corrected by applying the output value of 20th Century Climate Coupled Model (20C3M) based on past climate data during 1977 and 2006 and downscaled with Change Factor (CF) method. And future climate change scenarios were classified as three periods (2020s, 2050s, 2080s) and the change of flowout and suspended solid according to the climate change were estimated by coupling modeled value with SWAT model.

  • PDF

차양장치 특성에 따른 조명환경 평가 (Evaluation of Lighting Environment about the Characteristics of Shading Device)

  • 홍성관;임지선;정연홍;김유신;최안섭;권준범
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2008년도 추계학술대회 논문집
    • /
    • pp.153-156
    • /
    • 2008
  • According to the conversion of building into skyscraper, most buildings have curtain wall structures, so the shading device of building is required. The types of shading systems are a roller shade, venetian bind, and vatical blind and so on. A miler shade is mostly used among the shading systems. An experimental evaluation was verified whether there was an effect of shading materials(Perforated panel, Fabric) in each condition by an experiment with artificial lighting and daylight.

  • PDF

접합부 해석모델에 따른 보통모멘트철골골조의 비선헝 응답평가 (The Evaluation of Nonlinear response of the Ordinary Moment Resisting Frames using different analytical joint model)

  • 원학재;한상환;이리형
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2000년도 가을 학술발표회논문집
    • /
    • pp.222-229
    • /
    • 2000
  • The purpose of this study is to evaluate and make a comparison between the Ordinary Moment Resisting Frames using different analytical joint model for the Nonlinear response. For this purpose, 3-story structure was designed according to NEHRP 1994 Guidelines. And the center-line dimension model and model considering panel zone were used as analytical model for the structure. Nonlinear Static Procedure and Nonlinear Dynamic Procedure were used to evaluate seismic capacities and demands. The limitation in FEMA 273 was used as the variable number to predicte seismic demands of OMRFs. This analytical studies were performed with DRAIN-2DX modified by Shan Shi. Using the above results, the performance evaluation and seismic demands of OMRFs shall be performed. Finally NSP and NDP shall be compared.

  • PDF

경량무기발포 세라믹보드 및 무기단열재의 함수율에 따른 단열특성 (Characteristic of Insulation with Moisture Content Light-weight Inorganic Foam Ceramic Board)

  • 신현욱;송훈;추용식;이종규
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2013년도 추계 학술논문 발표대회
    • /
    • pp.198-199
    • /
    • 2013
  • To prevent energy waste in buildings used heat insulator. Heat insulator materials can be classified inorganic and organic. The inorganic material has lower water resistance. The inorganic material is heavy and worse thermal performance than organic materials. Technologies on energy saving and materials used in curtain walls have progressed with increase of high-rise and large buildings. However, there is little study to explain water resistance performance of the curtain walls. This study focused on evaluation of insulation of inorganic materials and performance evaluation by thermal conductivity.

  • PDF

방음벽상단 간섭장치 성능평가에 관한 연구 (The study of the experimental evaluation for the Interference Device on the noise barrier edge)

  • 장강석;윤제원;김영찬;김두훈
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2001년도 추계학술대회논문집 II
    • /
    • pp.844-848
    • /
    • 2001
  • Before we have made known the study of shape development of interference device for vehicle noise control. It's primary object greatly attenuate the noise due to transport vehicle by small products installed on the noise barrier edge. Also, it is able to improve the insertion loss of a noise barrier without increasing the height. The present time, we set up a newly manufactured products on the noise barrier edge and testify to it's the performance make use of an experiment and evaluation. In this paper the performance of noise barriers with attached newly developed products in terms of shape, absorptive material and split panel, are examined using field test.

  • PDF

보리-밀 복합분(複合粉)의 라면제조(製造) 및 제품특성(製品特性)에 관(關)하여 (A Note on the Preparation and Evaluation of Ramyon (deep fat fried instant noodle) Using Barley-wheat Composite Flours)

  • 유정희;최홍식;권태완
    • 한국식품과학회지
    • /
    • 제9권1호
    • /
    • pp.81-83
    • /
    • 1977
  • A study was conducted on the preparation of Ramyon using composite flours of raked barley (20 or 30%)-wheat(80 or 70%) in commercial plant scale and on the quality evaluation of Ramyon made from those flours. The naked barley(20%)-wheat(80%) flour gave acceptable Ramyon-making characteristics during the continuous Ramyon manufacturing process. The composite flours had a higher water absorption rate in kneading process and oil absorption value of the Ramyon product than those of wheat flour alone. Even though the Ramyon of composite flours showed a little inferior value compared with wheat flour alone in the cooking and texture characteristics, sensory panel scores of Ramyon indicated that the naked barley (20%)-wheat(80%) flour was acceptable in Ramyon.

  • PDF

고속도로 방음벽 유지관리를 위한 방음벽 노후도 평가 방안 (Deterioration Evaluation Method of Noise Barriers for Managements of Highway)

  • 김상태;신일형;김경수;김다애;김흥래;임자혜;이재준
    • 환경영향평가
    • /
    • 제28권4호
    • /
    • pp.387-399
    • /
    • 2019
  • 본 연구에서는 고속도로 방음벽을 대상으로 방음벽의 손상유형 분류 및 손상등급 체계를 마련하고 이를 반영한 방음벽 노후도 평가기법 개발을 목표로 하였다. 방음벽이 방음판, 기초, 지주로 구성되어 있고 10종의 다양한 재질이 활용되고 있는 방음판은 단일 또는 혼합형으로 사용되고 있으며, 방음판의 손상은 단일 또는 복합적인 손상을 나타내는 특징을 나타내고 있어 이러한 방음벽의 특징을 반영할 수 있는 방음벽 노후도 평가모델을 개발하고자 하였다. 방음벽에 주로 사용되고 있는 재질을 금속재, 플라스틱재, 목재, 투명재, 콘크리트재의 재질유형으로 나누고 또한, 각 재질별 손상유형을 부식, 변색, 변형, 깨짐, 탈리로 분류하여 방음벽의 손상유형을 방음벽 구성부재와 재질에 따라 세분화하였다. 방음벽 주요부위별로 각 손상유형별 손상등급을 양호, 경미, 보통, 심함으로 구분하여 방음판, 지주, 기초의 손상등급을 평가, 이를 바탕으로 부위별 노후도를 평가하여 가중평균을 통한 방음벽 전체의 노후도를 평가하는 방식을 통해서 종합적인 방음벽 노후화 정도를 평가하였다. 단일형 또는 혼합형 방음판을 사용하는 방음벽의 노후도 평가는 물론, 손상유형이 단일형 뿐만 아니라 복합형으로 나타나는 방음벽에 대해서도 체계적인 평가가 가능한 노후도 평가 기법을 개발하였으며, 이러한 평가시스템을 통하여, 현재 설치되어 있는 방음시설의 노후화 현황을 체계적으로 파악함은 물론, 이를 토대로 방음벽의 보수 및 개량을 위한 효율적인 유지관리 계획 및 시행에 활용이 가능할 것으로 판단된다.

비선형시간이력해석을 이용한 수배전반의 지진취약도 도출 (Seismic Fragility Evaluation of Cabinet Panel by Nonlinear Time History Analysis)

  • 문종윤;권민호;김진섭;임정희
    • 한국산학기술학회논문지
    • /
    • 제19권2호
    • /
    • pp.50-55
    • /
    • 2018
  • 지진은 예보가 거의 불가능하고 짧은 시간동안 일어나 지진이 발생할 때 적극적인 대처를 할 시간적인 여유가 거의 없어 다른 자연재해에 비해 인명피해와 재산피해가 많이 발생한다. 최근 전 세계적으로 지진이 빈번하게 발생하고 있다. 이와 같이 지진의 증가에 따라 구조물의 안전성 확보에 대한 연구가 활발히 진행되고 있지만 상대적으로 비구조요소인 전기 시설 등에 대한 연구는 미비한 실정이다. 그리고 현재 국내의 전기설비는 지진에 대한 안전설계를 하지 않는 경우가 많아 지진이 발생했을 때 손상에 매우 취약하다. 따라서 본 연구에서는 ABAQUS를 통해 실제 수배전반과 유사하도록 모델링을 하였고 자연지진파를 이용하여 3D 동적비선형해석을 수행하였다. 송변전설비 내진설계 실무지침서의 지진구역I과 보통지반암 조건에 따르면 기능수행수준의 최대응답가속도는 0.157g이다. 하지만 본 연구에서 일반적인 수배전반에 대한 해석결과의 0.1g에서 한계상태 도달비율은 30%로 안전하다고 볼 수 없다. 그리고 해석결과를 통해 지진취약도를 도출하고 분석하였다. 도출된 지진취약도는 수배전반의 한계상태를 판별하는 정량적 근거로 제시하고 이와 관련된 연구의 기초자료로 활용되는데 목적을 가지고 있다.