• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.3
• /
• pp.763-769
• /
• 2021

The relationship between government size and unemployment is an important topic of study in economics. Large public expenditure has been blamed for causing higher unemployment contrary to the belief that it would help in reducing unemployment. More research on the topic, however, needs to be done as the available literature has been based largely on data from developed countries. The present paper examines the existence of the relationship in states of India by using panel data analysis. For more comprehensive study, public expenditure is divided into development, non-development, and aggregate expenditures, while the types of unemployment under consideration are usual status and current weekly status. Indeed, it has been observed that development and non-development expenditures increase both the types of unemployment though the impact of the latter is higher. The findings are important as it implies that a cut in expenditure can be an important fiscal tool to fight unemployment. It was further observed that unemployment was higher among states with a more educated population, which also suggests a revisiting of the education policy in the country. States ruled by left parties have higher unemployment rate. Higher income states as well as states with higher growth rate tend to have lower unemployment rate.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.5
• /
• pp.405-413
• /
• 2010

A hybrid post and beam shear wall system with structural insulation panel (SIP) infill was developed as a part of a green home 'Han-green' project through post and beam construction for contemporary life style. This project is on-going at the Korea Forest Research Institute to develop a new building system which improves Korean traditional wet-type building system and stimulates industrialized wood construction practice with pre-cut system. Compared to the traditional wet-type infill wall components, the hybrid wall system has benefits, such as, higher structural capacity, better thermal insulation performance, and shorter construction term due to the dry-type construction. To build up the hybrid wall system, in previous, SIP infill wall components can be manufactured at factory, and then inserted and nailed with helically threaded nails into the post and beam members at site. Shear performance of the hybrid wall system was evaluated through horizontal shear tests. The SIP hybrid wall system showed higher maximum shear strength, initial stiffness, ductility, yield strength, specified strength, and the specified allowable strength than those of post and beam with light-frame wall system. In addition to this, the hybrid wall system can provide speedy construction and structural and functional advantages including energy efficiency in the building system.

• Journal of Distribution Science
• /
• v.14 no.4
• /
• pp.103-110
• /
• 2016

Purpose - This study investigates the improvement of rationalization of distribution structure in Korean diamond market. It also explores the international distribution of diamond and how the distribution of Korean diamond market system was improved. This study also for providing the evaluation method in case of purchasing diamond on the consumers. Research Design, Data, and Methodology - The research investigates how international diamond distribution market has been changed since 1933 by De Beers. The international Diamond rough stone has been deregulated in supply and demand by Debeers since July, 2000, therefore, the price maintenance policy of diamond market also has been changed. In the short term, the diamond price in market has been down, whereas, in the long term, the market share of Debeers has affected the high quality of diamond price in world market. Before 1985, both G color and VVS1 clarity were used as the level of percentages in the diamond certificate of authenticity in Korea. But, after 1985, the diamond certificate of authenticity uses Diamond Grading Report. Results - Between the 1970's and 1980's, Debeers had controlled about 80 percentages of international diamond supply market. But, Debeers share in diamond market fell by 60 percentages in 2000's. Debeers supplied 31%(4390 carets) of international diamond supply and 41%(39 billion dollars) in 2003. However, Debeers shares 50% of market shares in the diamond supply market by Alosa in Russia. In Korea, the diamond grading report system has been used since 1985. But, the diamond grading report system has price bubbles and much irrational parts in grading system methods. Conclusions - 4C, the grading system of diamond, is a method for comparing and evaluating diamond objectively. Diamond is graded according to its color, cut, clarity, and carat. The price of diamond is determined based on its each item. Consumers purchase diamond for the purpose of investment and wearing. In terms of investment, it is recommended to purchase diamond with color of D grade, cut with Excellent or Very Good Cut grade, Clarity of FL or IF, and more than 3 carat. As for wearing purpose, it is highly recommended for diamond to have color of F or G grade, cut of Excellent or Very Good Cut, clarity of VS2 or SI1, and more than 1 carat Before 2000, Central Selling Organization(CSO) distributed about 80 percentages rough diamond to world market exclusively by purchase, classification, assessment, and sales. After 2000, Dbeers diamond company looses slowly market shares, while Almosa diamond company etc. in Russia are taking over world market shares more and more. Debeers market shares have been falling over the years, and the international diamond markets are gradually growing by other international diamond companies. But, there is no change in Korean diamond market after 1980's. Korean diamond distribution needs to follow international level of Diamond Grading System. By using different grading systems with different panel members, Korean diamond grading system needs to follow international perfect grading systems to grow diamond markets and maintain within top 10 diamond markets countries.

• International Journal of Aerospace System Engineering
• /
• v.4 no.1
• /
• pp.9-12
• /
• 2017

In this study, an investigation on mechanical properties of flax natural fiber composite is performed as a precedent study on the design of eco-friendly structure using flax natural fiber composite. The Vacuum Assisted Resin Transfer Molding-Light (VARTML) manufacturing method is adopted for manufacturing the flax fiber composite panel. The VARTML is a manufacturing process that the resin is injected into the dry layered-up fibers enclosed by a rigid mold tool under vacuum. In this work, the resin flow analysis of VARTM manufacturing method is performed. A series of flax composite panels are manufactured, and several kinds of specimens cut out from the panels are tested to obtain mechanical performance data. Based on this, structural design of chemical storage tank for agricultural vehicle was performed using flax/vinyl ester. After structural design and analysis, the resin flow analysis of VARTM manufacturing method was performed.

• International Journal of Aerospace System Engineering
• /
• v.1 no.1
• /
• pp.21-28
• /
• 2014

In this study, an investigation on mechanical properties of flax natural fiber composite is performed as a precedent study on the design of eco-friendly structure using flax natural fiber composite. The Vacuum Assisted Resin Transfer Molding-Light (VARTML) manufacturing method is adopted for manufacturing the flax fiber composite panel. The VARTML is a manufacturing process that the resin is injected into the dry layered -up fibers enclosed by a rigid mold tool under vacuum. In this work, the resin flow analysis of VARTM manufacturing method is performed. A series of flax composite panels are manufactured, and several kinds of specimens cut out from the panels are tested to obtain mechanical performance data. Based on this, structural design of chemical storage tank for agricultural vehicle was performed using flax/vinyl ester. After structural design and analysis, the resin flow analysis of VARTM manufacturing method was performed.

• International Journal of Korean Welding Society
• /
• v.3 no.1
• /
• pp.2-7
• /
• 2003

Laser welding application for car body manufacturing has many advantages in the stiffness and the lightness of vehicle, the productivity of assembly line, and the degree of freedom in design. This presentation will express the innovation of car body manufacturing including parameter optimization, process modeling, and system integration. In this application the investment for systems was cut down dramatically by real time switching over the laser path between two welding stations. Points of technical discussion are as follows; optimization of parameters such as laser power, robot speed and trajectory, compact and useful design of jig & fixture to assure welding quality for 3 sheet-layer zinc-coated steel, system integration between 4㎾ Nd:YAG laser device and the other systems, on-line real time welding quality monitoring system, perfect safety standards for high power laser, minimization of consumption costs such as arc lamp, protective glass for optic, etc. This application was successfully launched mass production line in 2001. The laser-welded line of side panel consists of 122 stitches totally. And the length is about 2.4m.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.5 no.3
• /
• pp.23-31
• /
• 2014

Recently, sewer-pipe constructions replacing deteriorated pipes are currently underway in the downtown area. To resolve many problems in the conventional method of open-cut construction, lining-board system using light-weight GFRP panels is developed. The pultruded GFRP panels can be successfully used for the developed lining-board system as temporary decks and retaining walls in virtue of light weight, high strength and high durability. In this paper, the structural safety and serviceability of the lining-board system are examined through FE analyses and experiments. Further more, a field application of the lining-board system is presented. The field application shows that quality and environment of construction can be significantly improved.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.851-854
• /
• 2008

In order to reduce the manufacturing cost of TFT LCDs and cut down an amount facilities invested, there are many LCD panel makers contributes to convert the current Five-mask manufacturing process into the noble Four-mask fabrication process. We optimized the slit mask to improve the poor process reliability.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.1
• /
• pp.64-71
• /
• 2009

In this paper, a study on low-velocity impact response of honeycomb sandwich panels was done for the changes of impact location and core fabrication angles. The test specimens were made of glass/epoxy laminate facesheet and aluminum honeycomb core. Square samples of 100mm and 100mm sides were subjected under low-velocity impact loading using instrumented testing machine at three energy levels. Impact parameters like maximum force, time to maximum force, deflection at maximum force and absorbed energy were evaluated and compared for the changes of impact location and core fabrication angle. The impact damage size were measured at facesheet surface by 3-Dimensional scanner. Also, sandwich specimens after impact test were cut to analyse the failure mode.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.4 no.3
• /
• pp.51-56
• /
• 2005

This research presents a modeling and a manufacturing method of screw flow meter. This paper introduces the efficient design and manufacturing method of screw type flow meter using reverse engineering and test technology. The methods introduced this paper utilize the reverse engineering that is increasing accuracy of modeling and manufacturing of reverse model. And then it can be used in performance test with hydraulic test equipment. Hence this can be used in the basic document for development of the quite accurate flowmeter.