• International Journal of Fluid Machinery and Systems
• /
• 제7권3호
• /
• pp.125-129
• /
• 2014

The paint removal and recoating are the very important process in airplane maintenance. The traditional technology is to use the chemical way corroding the paint with paint remover. For changing the defects, corrosion & pollution & manual working, of the traditional technology, the physical process which removes the paint of airplane with 250MPa/250kW ultra-high pressure rotary water jetting though the surface cleaner installed on the six axes robot is studied. The paint layer of airplane is very thin and close. The contradiction of water jetting paint removal is to remove the paint layer wholly and not damage the surface of airplane. In order to solve the contradiction, the best working condition must be reached through tests. The paint removal efficiency with ultra-high pressure and move speed of not damaged to the surface. The move speed of this test is about 2m/min, and the paint removal efficiency is about $30{\sim}40m^2/h$, and the paint removal active area is 85-90%. No-repeat and no-omit are the base requests of the robot program. The physical paint removal technology will be applied in airplane maintenance, and will face the safety detection of application permission.

• 보존과학회지
• /
• 제36권1호
• /
• pp.47-59
• /
• 2020

Scientific analysis was conducted to identify the paint pigments used in the Buseoksa Josadang murals. optical microscopy(OM), X-ray fluorescence(XRF), XRF mapping, scanning electron microscopy-energy dispersive X-ray spectroscopy(SEM-EDS), and Raman spectroscopy were performed to examine the pigments. The results confirmed that the Josadang murals consist of two paint layers wherein the pigments were distinct for most colors. It was estimated that celadonite, white clay, red ochre, cinnabar and minium, synthetic green pigment containing tin and zinc paratacamite, or botallackite were used in the upper layer. In addition, bone white, celadonite, red ochre, azurite, cinnabar or vermilion, and gold were identified in the lower layer. In addition, as Zn and Sn were detected in the green pigments extracted from the top layer of the paint, it is believed that Josadang murals were repainted over the original paint layer at some point after the 17th century. In addition, white pigments containing calcium phosphate were found in all the colors in the bottom layer, which is the original paint layer. These results are significant because this is the first time that white pigments are found in Korean traditional paintings. Additionally, the information revealed about the pigments in this study will serve as areference for the pigments used in the Goryeo period.

• 한국세라믹학회지
• /
• 제42권10호
• /
• pp.678-684
• /
• 2005

Sick house syndrome comes from VOCs that is harmful to health. To reduce VOCs, the cause of sick house syndrome, several materials have been developed and use. One of this materials, VOCs absorption paint was developed. VOCs absorption paint contains ceramic binder and zeolite powder. In the present study, eco-ceramics paint has been successfully fabricated by high-speed mixer using ceramic binder and filler powders. The eco-ceramics paint thus obtained have a deodorization rate with about 95.7$ \%$ and the bacteria decreasing rate is about 99.6$\%$. Moreover, the eco-ceramics paint showed excellent VOCs interception properties due to effect of ceramics layer and zeolite which exist in surface of paint.

• 한국표면공학회지
• /
• 제49권2호
• /
• pp.141-146
• /
• 2016

In this study, electrophoretic paint (E-paint) was deposited on the knife-abraded surface of AZ31 magnesium alloy (AZ31), and its adhesion and corrosion resistance were examined by tape peel-test and salt spray test, respectively. E-paint started to deposit on AZ31 Mg alloy after an inductance time and pores were found in the E-paint layer which is ascribed to hydrogen bubbles generated on the surface during the painting process. The pores disappeared after curing for 15 min at $160^{\circ}C$. The E-paint on AZ31 exhibited good adhesion after immersion in deionized water for 500 h at $40^{\circ}C$. The E-paint sample without scratch showed no corrosion after 1500 h of salt spray test. However, on the scratched sample, blisters were visible adjacent to the scratched sites after 500 h of salt spray test.

• 한국표면공학회지
• /
• 제49권1호
• /
• pp.1-13
• /
• 2016

This review deals with one of the surface modification techniques, chemical conversion coating and particularly cerium-based conversion coatings (CeCC) as a promising substitute for chromium and phosphate conversion coating on magnesium and its alloys. The CeCCs are commonly considered environmentally friendly. The effects of surface preparation, coating thickness, bath composition, and e-paint on the corrosion behavior of CeCCs have been studied on the AZ31 magnesium alloy. This review also correlates the coating microstructural, morphological, and chemical characteristics with the processing parameters and corrosion protection. Results showed that the as-deposited coating system consists of a three layer structure (1) a nanocrystalline MgO transition layer in contact with the Mg substrate, (2) a nanocrystalline CeCC layer, and (3) an outer amorphous CeCC layer. The nanocrystalline CeCC layer thickness is a function of immersion time and cerium salt used. The overall corrosion protection was crucially dependent on the presence of coating defects. The corrosion resistance of AZ31 magnesium alloy was better for thinner CeCCs, which can be explained by the presence of fewer and smaller cracks. On the other hand, maximum corrosion protection was achieved when AZ31 magnesium samples with thin CeCCs are e-painted. The e-paint layer further restricts and hinders the movement of chloride and other aggressive ions present in the environment from reaching the magnesium surface.

• 한국표면공학회지
• /
• 제51권6호
• /
• pp.405-414
• /
• 2018

The present study investigated the adhesion and corrosion resistance of subsequent electrophoretic paint (E-paint) on "electroless" paint coated AZ31 Mg alloy, which was formed by immersion of AZ31 Mg alloy in E-painting solution. It was found that with increasing immersion time of AZ31 in E-painting solution, the amount of paint deposited by electroless process increased but it decreased the electrochemical equivalent of E-painting process and the adhesion of the subsequent E-paint layer. The E-paint on electroless paint coated AZ31 contained pores with the highest pore density and the largest pore size was obtained on the samples with electroless times of 2 and 5 minutes, respectively. Results of the salt-spray test showed an accelerated growth of blisters over the entire surface of the sample immersed for less than 5 minutes whereas blisters were observed only in the vicinity of the scratch in case of samples treated for 15 and 30 minutes. The E-paint on AZ31 with shorter electroless immersion time in E-painting solution was found to have good adhesion and better corrosion resistance.

• 대한기계학회논문집B
• /
• 제23권3호
• /
• pp.311-319
• /
• 1999

The thermal conductivity ${\lambda}_b$, thermal diffusivity ${\alpha}_b$ of the thin black paint layer sprayed on solid surface and absorptivity a for laser beam are measured by applying a non-contact measurement method of the thermophysical properties of solids. The values of a=0.67, ${\lambda}_b=1.45W/mK$ and ${\alpha}_b=1.24{\times}10^{-6}m^2/s$ are obtained for the sprayed lay~ thickness $z_b{\fallingdotseq}40\;{\mu}m$. Furthermore, for the $z_b{\fallingdotseq}24\;{\mu}m$ thick layers which arc formed by rubbing with a glass rod after spraying, the values of a=0.73, ${\lambda}_b=1.85W/mK$. and ${\alpha}_b=1.09{\times}10^{-6}m^2/s$ are obtained. It is also shown that the present thermal diffusivity ${\alpha}_b$ for $z_b{\fallingdotseq}40\;{\mu}m$ Is about 30~80% larger than those obtained by Araki et al. for the thicker layer $z_b{\fallingdotseq}150{\sim}248\;{\mu}m$. This method could be applied to the measurement of thermophysical properties of thin layer on solids.

• 접착 및 계면
• /
• 제24권2호
• /
• pp.69-75
• /
• 2023

최근 자기복원(self-recovery) 코팅층을 가진 자동차용 도장면 보호필름의 적용이 증대되고 있다. 본 연구에서는 poly(urea-urethane) hybrid 자기복원 코팅층을 가진 poly(vinyl chloride) 기재 보호필름에 대한 기본 물성에 대한 평가 결과를 보고한다. Poly(urea-urethane) 기반 코팅층을 구성하고 있는 주요 화합물의 비율과 코팅층의 두께 변화에 따른 자기복원성능을 확인하였으며, 색차 값 측정을 통해 내오염성능을 정량화 하였다. 또한, 소수성 첨가제로 외부 오염에 대한 표면특성을 향상시키기 위하여, 소량의 실리콘계 반응형 첨가제를 코팅 조성물에 함량에 따른 easy-cleaning 효과와 접촉각을 확인하였다. 마지막으로, poly(urea-urethane) 자기복원 코팅층을 가진 보호필름의 장기간 사용에 따른 변색 및 변형에 대한 가능성을 확인하고자 촉진 내후성 평가를 진행하였다.

• 보존과학연구
• /
• 통권21호
• /
• pp.119-143
• /
• 2000

The pigments composition and structure of the mural painting at Pongjongsa Kuknakjon is discussed. The structure of inner wall is consisited of Paint layer, Ground divided two layers of yellow and white pigments, Support. In case of outer wall, it is consisted of Paint layer, Ground divided three layers of yellow and green pigments, a layer mixed green pigments and paint layer, Support. As a result of compositon analysis of mural painting pigments at Pongjongsa Kuknakjon using Micro-area X-ray diffraction system, the red pigment on inner wall is consisted of Heamatite($Fe_2O_3$), Magnetite($Fe_3O_4$)of deep black pigment, and Chalcocite($Cu_2S$) of light black pigment. The white pigment on outer wall is consisted of Anglesite($PbSO_4$) and Atacamite($Cu_2CI(OH)_3$) of green pigment. We found out that natural pigments painted in the mural painting at Pongjongsa Kuknakjon has kept up its own color for a long time due to using the natural pigment not to artificial synthetic pigment.

• 보존과학연구
• /
• 통권30호
• /
• pp.171-187
• /
• 2009

The Seated iron Vairocana Buddha statue of Dopiansa Temple, Cheolwon was designated National treasure No. 63, it is very important to rearch about Korean Buddha statue because it has an inscription on the back indicates that it was made in 865 A.D., the fifth year of the reign of King Gyeongmun(861-875) of Unified Silla(668-935), through the devoted faith of some 1,500 Buddhist followers of the Cheorwon-gun area. In this conservation treatment, for the Seated iron Vairocana Buddha statue of Dopiansa Temple, Cheolwon plating layer and cashew paint layer of the iron pedestal were removed and for the paint the Body of the Buddha, fake metal layer and plaster layer were removed, stabilizing treatment and coating treatment were done, and removal and restoration of earlobe which had been damaged and later was restored with plaster in the regilding in 1988, and the white hair on forehead was replaced with material of rock crystal, and conch-shaped hair damaged was restored on 35 spots.