• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.7A
• /
• pp.639-645
• /
• 2010

In the paper, a selection relaying scheme is proposed and analyzed in which relays retransmit the erroneous packet without checking the correctness of their received packets. The proposal not only achieves the full diversity gain in a limited number of retransmissions but it also gets better performance than other schemes. Additionally, a threshold in the number of retransmissions and the closed form expression for packet error rate (PER) are derived. Simulation results are given to confirm the accuracy of analysis and to significantly prove advantages of the proposal.

• Journal of Korea Game Society
• /
• v.2 no.1
• /
• pp.23-29
• /
• 2002

Multicast protocols are efficient methods of group communication such as video conference, Internet broadcasting and On-Line Game, but they do not support the various transmission protocol services like a reliability guarantee, FTP, or Telnet that TCPs do. The Purpose or this Paper is to find a method to utilize multicast routers can simultaneously transport multicast packets and TCP packets. For multicast network scalability and error recovery the existing SRM(Scalable Reliable Multicast)method has been used. Three packets per TCP transmission control window site are used for transport and an ACK is used for flow control. A CBR(Constant Bit Rate) and a SRM is used for UDP traffic control. Divided on whether a UDP multicast packet and TCP unicast packet is used simultaneously or only a UDP multicast packet transport is used, the multicast receiver with the longest delay is measured on the number of packets and its data receiving rate. It can be seen that the UDP packet and the TCP's IP packet can be simultaneously used in a server router.

• Journal of Advanced Navigation Technology
• /
• v.11 no.3
• /
• pp.274-280
• /
• 2007

An ultra-wideband signal is characterized by a radiated spectrum with wide bandwidth around a relatively low center frequency. In this paper, the bit error rate (BER), packet error rate (PER), and data throughput performance for an ultra-wideband system with M-ary correlation receiver are analyze in additive white Gaussian noise (AWGN) and co-channel interference channel. To evaluate the performance of UWB system, a set of UWB communication waveform as pulse position modulated (PPM) signals consisting of more than one UWB pulse is used. The M-ary PPM signals are defined to be equally correlated in order to simplify the system performance analysis. The analysis for system performance shows that the wireless channel error significantly degrades throughput performance and can be effectively increased by hybrid ARQ scheme. Also, an attempt for comparing the data throughput of ultra-wideband system on different performance improvement schemes and parameters has been made. From the performance evaluation process, it is shown that the effects of wireless channel and hybrid ARQ scheme for ultra wideband M-ary PPM system can be evaluated by means of a suitable combination of the PER, throughput vs. signal-to-noise power ratio per bit.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.9A
• /
• pp.1465-1474
• /
• 2001

본 논문에서는 BER(Bit Error Rate)과 패킷 길이에 따라 블루투스의 다양한 ACL(Asynchronous Connection Less) 패킷 종류들의 성능을 분석하였고 주어진 BER에서 적합한 패킷의 최적 종류와 길이를 제안하였다. ACL 패킷 중 DM(Data Medium Rate) 형은 1/3FEC과 2/3FEC과 ARQ 방식을 사용하지만 DH(Data High rate) 형은 2/3FEC과 ARQ만을 사용한다. 이러한 특징은 잡음이 존재하는 무선 링크 상에서 메시지의 평균 전송 시간과 처리율과 같은 성능 지표에 영향을 준다. 이러한 ACL 패킷의 PER(Packet Error Rate)을 무선 링크의 BER과 패킷 유료부하 길이의 항으로 제시하고 PER과 이에 따른 ARQ 방법에서의 재전송 회수를 고려하여 메시지의 평균 전송시간 및 전송 효율을 구하는 방법을 제시하였다. 본 논문에서는 이를 이용하여 주어진 BER에서 성능 지표를 최대화하는 ACL 패킷의 최적 종류와 최적 길이를 제시하였다. 이를 기초로 전송 효율을 최대화하는 최적 패킷의 종류와 길이가 평균 전송 시간을 최소화하는 패킷의 종류와 길이는 다르다는 것을 보였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.195-198
• /
• 2000

This paper have been analyzed performance of DS-CDMA/QPSK system in short range IVC, and evaluated packet uu rate(PER) in an On-Ray Rician channel model suitable for platoon driving of AVHS that 60GHz millimeter wave is very powerful to MP(multipath-wave). We analyzed probability characteristic of system as variation of Rician factor and user number in One-Ray Rician fading environment and evaluated packet error rate(PER) according to inter-vehicle distance when the BCH channel coding(255,247,1) and diversity schemes is adopted.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.787-793
• /
• 2015

In order to support reliable medium access control (MAC) layer multicast services in Broadband Wireless Access (BWA) networks, we here propose spreading codes (Cumulative ACK (CA) code and ARQ Feedback Request (AFR) code) based reliable multicast feedback scheme. The status indications based on the automatic repeat request (ARQ) mechanism are needed in some multicast services. In accordance with various wireless channel environments, we demonstrate the performance excellency of our proposed scheme with respect to required uplink resources compared with the original feedback scheme based on unicast ARQ feedback messages. In addition, we analyze packet error rate (PER) against the various wireless channel environments.

• ETRI Journal
• /
• v.41 no.2
• /
• pp.184-196
• /
• 2019

Wavelet packet modulation (WPM) is a multicarrier modulation (MCM) technique that has emerged as a potential alternative to the widely used orthogonal frequency-division multiplexing (OFDM) method. Because WPM has overlapped symbols, equalization cannot rely on the use of the cyclic prefix (CP), which is used in OFDM. This study applies linear minimum mean-square error (MMSE) equalization in the time domain instead of in the frequency domain to achieve low computational complexity. With a modest equalizer filter length, the imperfection of MMSE equalization results in subcarrier attenuation and noise amplification, which are considered in the development of a bit-loading algorithm. Analytical expressions for the bit error rate (BER) performance are derived and validated using simulation results. A performance evaluation is carried out in different test scenarios as per Recommendation ITU-R M.1225. Numerical results show that WPM with equalization-aware bit loading outperforms OFDM with bit loading. Because previous comparisons between WPM and OFDM did not include bit loading, the results obtained provide additional evidence of the benefits of WPM over OFDM.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.5
• /
• pp.805-814
• /
• 1994

In this paper, we introduce a new method which is available for analyzing the throughput of the packet radio network by using the auxiliary Markov transient matrix with a failure state and a success state. And we consider the effect of symbol error for the network state(X, R) consisted of the number of transmitting PRU X and receiving PRU R. We examine the packet radio network of a continuous time Markov chain model, and the direct sequence binary phase shift keying CDMA radio channel with hard decision Viterbi decoding and bit-by-bit changing spreading code. For the unslotted distributed multi-hop packet radio network, we assume that the packet error due to a symbol error of radio channel has Poisson process, and the time period of an error occurrence is exponentially distributed. Through the throughputs which are found as a function of radio channel parameters, such as the received signal to noise ratio and chips of spreading code per symbol, and of network parameters, such as the number of PRU and offered traffic rate, it is shown that this composite analysis enables us to combine the Markovian packet radio network model with a coded DS/BPSK CDMA radio channel.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.63-67
• /
• 2001

본 논문에서는 블루투스 Scattenet 환경에서 임펄스 잡음의 영향을 분석하였다. 임펄스 잡음은 Middleton의 A급 임펄스 환경을 가정하였고, Scatternet에 의한 동일채널 간섭과 라이시안 페이딩을 고려하였다. 임펄스 잡음이 존재하는 블루투스 Scatternet에서 PER (Packet Error Rate)과 ARQ 기법을 적용한 처리율 (Throghput) 향상을 임펄스 파라미터 A와 I'에 따라서 알아 보았다. 시뮬레이션 결과 임펄스 파라미터 A와 I'에 따라 PER 성능에 미치는 영향이 큰 것을 알 수 있었고 SAW-ARQ 방법을 사용하여 성능이 향상됨을 알 수 있었다.

• Journal of KIISE:Information Networking
• /
• v.31 no.4
• /
• pp.375-383
• /
• 2004

As wireless mobile networks have been widely adopted due to their convenience for deployment, the research for improving their performance has been actively conducted. Since their throughput is restrained by the packet corruption rate not by congestion as in wired networks, however, network simulations for performance evaluation need to select the appropriate wireless channel model representing the behavior of propagation errors for the evaluated channel. The selection of the right model should depend on various factors such as the adopted frequency band, the level of signal power, the existence of obstacles against signal propagation, the sensitivity of protocols to bit errors, and etc. This paper analyzes 10-day bit traces collected from real sensor channels exhibiting the high bit error rate to determine a suitable sensor channel model. For selection, it also evaluates the performance of two error recovery algorithms such as a link layer FEC algorithm and three TCPs (Tahoe, Reno, and Vegas) over several channel models. The comparison analysis shows that CM(Chaotic Map) model predicts 3-time less BER variance and 10-time larger PER(Packet Error Rate) than traces while these differences between the other models and traces are larger than 10-time. The simulation experiments, furthermore, prove that CM model evaluates the performance of these algorithms over sensor channels with the precision at least 10-time more accurate than any other models.