• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.1
• /
• pp.1-10
• /
• 2018

Recently, there has been rapid development in the field of flexible electronic devices, such as organic light emitting diodes (OLEDs), organic solar cells and flexible sensors. Encapsulation process is added to protect the flexible electronic devices from exposure to oxygen and moisture in the air. Using numerical simulation, we investigated the effects of the encapsulation layer on mechanical stability of the silicon chip, especially the fracture performance of center crack in multi-layer package for various loading condition. The multi-layer package is categorized in two type - a wide chip model in which the chip has a large width and encapsulation layer covers only the chip, and a narrow chip model in which the chip covers both the substrate and the chip with smaller width than the substrate. In the wide chip model where the external load acts directly on the chip, the encapsulation layer with high stiffness enhanced the crack resistance of the film chip as the thickness of the encapsulation layer increased regardless of loading conditions. In contrast, the encapsulation layer with high stiffness reduced the crack resistance of the film chip in the narrow chip model for the case of external tensile strain loading. This is because the external load is transferred to the chip through the encapsulation layer and the small load acts on the chip for the weak encapsulation layer in the narrow chip model. When the bending moment acts on the narrow model, thin encapsulation layer and thick encapsulation layer show the opposite results since the neutral axis is moving toward the chip with a crack and load acting on chip decreases consequently as the thickness of encapsulation layer increases. The present study is expected to provide practical design guidance to enhance the durability and fracture performance of the silicon chip in the multilayer package with encapsulation layer.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.24 no.2
• /
• pp.85-89
• /
• 2018

The effects of distribution temperature due to season all changes on quality and storability of baby leaf beet (Beta vulgaris L.) was examined in modified atmosphere (MA) packages. The beet leaf had been harvested at the 10 cm leaf length stage and packaged with an oxygen transmission rate (OTR) film of $1,300cc{\cdot}m^{-2}{\cdot}day^{-1}{\cdot}atm^{-1}$ and then held at 4 different distribution temperatures which were $-2^{\circ}C$, $4^{\circ}C$, $20^{\circ}C$, or $30^{\circ}C$ for 5 hrs and then stored for 18 days at $8^{\circ}C$. The loss of fresh weight of packged baby leaf beet was lowest at the $4^{\circ}C$ treatment, and below 0.6% in all distribution temperature treatments. The atmosphere composition in packages did not show any significant differences among treatments. The oxygen conc. was the highest at 18.0% after the $4^{\circ}C$ treatment, carbon dioxide conc. showed the maximum value of 4% at the $30^{\circ}C$ and $-2^{\circ}C$ treatments, and ethylene conc. was highest at the $10^{\circ}C$ treatment after 10 days in storage. The hardness was the highest at the $4^{\circ}C$ treatment on the final storage day. The $4^{\circ}C$ treatment showed the highest visual quality and the lowest off-odor and aerobic plate count. Therefore, it is necessary to establish a low-temperature distribution system which is controlled under $4^{\circ}C$, because the baby leaf beet's storability and microbial growth are effected even during a short time of 5 hrs during the distribution process.

• The Journal of the Korea Contents Association
• /
• v.20 no.9
• /
• pp.1-10
• /
• 2020

National R & D data covers information in all fields from basic science research to industrialization, but it is expressed in technical terms, which make it difficult for the public to use. Accordingly, NTIS developed and launched the data curation service 'R&D issue service', which selects national R&D information on national and social issues and provides them to the public. Therefore, this study aims to analyze the effect of a data curation service on NTIS users' access to R&D data and suggest how to develop the curation service. The R&D issue service extracts issue from the news article and provide related national R&D projects, achievements and major research institute. All raw data used for the service are open to the public, organized in a report format and provided as PDF files. In addition, automative process is developed for all NTIS users to make individual issue packaging like administrator. The results show that 'R&D issue service' launching increases users' access and convenience to R&D data related to major issues, and the number of page views of users increased after the service was opened.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.57-64
• /
• 2017

Today, due to the environmental regulations regarding air pollution in the EU, the use of EPS (Styrofoam) as the cushioning material in the packaging industry is decreasing. In effect, air cushioning based cushioning materials are rapidly expanding into the market and replacing EPS, due to their excellent buffering ability and environmental friendliness. This is a new selective filling type air filling material manufacturing technology that affords improvements in the amount of raw materials required, its processing and its aesthetic appearance compared to the conventional air filling cushioning materials. In this study, a multi-stage air cell filling valve molding technology is developed based on selective filling technology, which allows packages to be selectively filled in various forms by applying valve forming structure technology. This multi-stage air cell filling valve molding technology is a technique in which a plurality of injection ports are formed by laminating three layers of films, viz. a first injection film, a valve film, and a second injection film having valve ends. In the conventional technology, a separate external air injection path for injecting air into a plurality of connected air bags is needed. However, in the proposed system, an external air injection path is formed inside the air bag, Due to the lack of need for an injection furnace, the raw material and process are reduced and air is injected and then discharged, while the air bag is reduced in length to 63 ~ 66% of its normal value. The outer surface of the outer air injection path is integrated inside by maintaining the original length of the cross section, while the unnecessary folded air is injected into the interior of the air bag, This smart air filling type cushioning material manufacturing technology constitutes a big improvement over the existing technologies.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.6
• /
• pp.526-534
• /
• 2011

The MFS (Mlti-Functional Structure) concept, which integrates the electronics, thermal control and structure into a single packaging system, has been developed and applied to reduce the volume and weight of the satellite. Therefore, this MFS can eliminate the bulky chassis/frames, cables and connectors of the electronic equipment. The main point of this traditional MFS is the replacement of the electrical chassis/frames with MCMs (Multi-Chip Modules) that require much costs and efforts for developing. This paper shows the new MFS concept that effectively saves the volume and weight. The structure including the thermal control and radiation shielding elements will be designed and manufactured as the rectangular grid-stiffened structure. The rectangular grid-stiffened structure is the modification of the iso-grid structure, and provides the enough spaces for putting the general PCBs without the chassis/frames.

• Food Science and Preservation
• /
• v.23 no.7
• /
• pp.923-930
• /
• 2016

The purpose of this study was to improve the quality of the steamed rice cakes added with powder and extract of Schisandra chinensis (SC). Steamed rice cakes were prepared by adding SC using 1% hot-air dried SC powder (DP), hot-air dried SC extract (DE), freeze dried SC powder (FP) and, frozen SC extract (FE). After packaging with nylon/polyethylene films, the cakes were stored at $25^{\circ}C$ for 5 days. The FE-treated steamed rice cake had the lowest pH value. The $L^*$ value of the control cakes was highest immediately after processing and decreased during storage. The $a^*$ values of FP- and FE-treated steamed rice cakes were higher than those of DP- and DE-treated cakes. The $b^*$ values of DP- and DE-treated steamed rice cakes were higher than those of FP- and FE-treated cakes. Total phenolic contents of DP and DE were lower than those of FP and FE. Anthocyanin contents of DP- and DE-treated steamed rice cakes were lower than those of FP- and FE-treated cakes. Schisandrin contents of DP- and FP-treated steamed rice cakes were lower than those of DE- and FE-treated cakes. Ferric reducing antioxidant power assays revealed that DP and DE had lower antioxidant powers than those of FP and FE. The results of this study indicate that, among the treatments methods used, the steamed rice cake treated with FE had the highest functional component and antioxidant activity levels.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.5
• /
• pp.67-75
• /
• 2009

While the trend of all industries recently lies in combination, construction industry is much interested in enhancing efficiency and competitiveness in the aspect of site control by adopting RFID. Though RFID has been applied to diverse areas thus far, it cannot be easily applied to construction industry due to diverse physical, chemical and use-environmental properties of construction materials. Furthermore, it is rarely applied to the site because of many problems in its application. It is required to prepare RFID code issuance and system that can systematically control the code as well as to research the standardization of frequency, specification, protocol, package method, recognition method, etc in order to apply RFID to construction industry. In this research, RFID code issuance and management program are proposed as a part of program research to apply RFID. Furthermore, the restricted matters of existing RFID tag are drawn to produce pilot product of RFID tag that can solve it so as to perform site application test. According to the experiment, effective recognition distance varies depending on material/environmental property and control efficiency changes depending on attachment method and application method. Thus, preparing diverse restrictive factors and solutions by systematically analyzing control method(medium, process) of current architecture materials and applying it to construction site can be the way to successfully apply RFID.

• Journal of Bio-Environment Control
• /
• v.17 no.4
• /
• pp.319-324
• /
• 2008

The sweet pepper (paprika) is one of the most important exported vegetable crops in Korea. This study evaluated the storability of sweet pepper fruits between 2 cultivars with different maturities under different storage conditions. The sweet peppers ('Special' and 'Fiesta') were grown in a rockwool hydroponic system, and harvested two different maturities: half-maturity and full-maturity levels. The sweet pepper fruits were stored in MA(non-ventilated) and non-MA(ventilated) conditions at 4 and $9^{\circ}C$ for 20 days. The storability of sweet pepper fruit was the highest in $4^{\circ}C$ MA conditions that remained 5% carbon dioxide and 10% oxygen during the storage. The ethylene concentration in MA condition showed $2{\sim}8{\mu}l/l$ regardless of storage temperatures, cultivars and maturities. The fruits packaged with non-ventilated film, showed lower weight loss, and higher firmness, and there was no different about decay ratio compared to the fruits packed ventilated film. The coloration of semi-matured fruit that colored 50% before storage progressed faster in non-ventilated packaging condition at $9^{\circ}C$, but their color did not changed as same as level of full-matured fruit. The electrolyte leakages and respiratory rate that estimated degree of chilling injury was highest in non-MA(ventilated) conditions of 'Special' full matured fruit placed at room temperature for 3 days following storage at $4^{\circ}C$ for 20 days. It may be suggested that sweet pepper fruit packed sealed (non-ventilated) film and stored at non-chilling temperature can be maintained better quality for long term storage.

• Journal of Bio-Environment Control
• /
• v.18 no.1
• /
• pp.51-59
• /
• 2009

Bulb onion cultivation area has been restricted in southern part of Korea to avoid blotting and bulb division. The traditional culture method is transplanting bare-rooted plantlet into the field at the end of summer and harvesting at the beginning of next summer. The hot weather and weak plantlets occasionally causes unstable supply of onions in autumn. In order to enlarge cultivation area and to reduce culture period, long nursery system using plug tray and spring transplanting was tried. Forty cultivars collected from Korea and Japan were nursed using 200-plug tray and transplanted to the field in spring. Marketable yield was not related to the seedling size but lodging time. Cultivar of 'Hamasodachi' was lodged early and resulted low marketable yield. Cultivar of 'Cheonjudaego' was not lodged and yielded high but not in accordance with storability. Generally early lodged cultivars showed low storability. In order to avoid rainy harvesting season, cultivars requires excessive long time for lodging is not recommended for spring culture. Using plug nursery and spring transplanting, we successfully produced marketable onions in 3 months. But immediate using of the harvested onion is recommended. The storability of produced onions showed different result among cultivars, storage of spring onion was not recommended.

• Economic and Environmental Geology
• /
• v.49 no.3
• /
• pp.213-224
• /
• 2016

Non-conventional resource and alternative energy were researched for predicting oil peak. In this study, one of many non-conventional resources, specifically oil-sands, was investigated due to the increasing interest of oil-sands plant modularization in permaforst areas for reducing the construction periods through modular transportation while limiting local construction workers. Hence, tehcnological trends were analyzed for oil-sand plant modularization. Data used were between 1994 and 2015 for patent analysis while targets included Korea, US, Japan, Europe and Canada. Technology classification system consisted of mining, steam assisted gravity drainage(SAGD), separation/upgrading/tailors ponds, module design/packaging, module transportation and material/maintenance. Result of patent analysis, patent application accounts 89% in US and Canada. The main competitive companies were Shell, Suncor and Exxon-mobil. Unlike other oil developments, oil-sands have a long-term stable production characteristic, hence, it is important to ensure the competitiveness of oil-sands for obtaining a patent in the long run.