• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.133-136
• /
• 2001

A new package design method to reduce resonance effect due to an IC package is represented. Frequency-variant circuit model of the power/ground plane was developed to accurately reflect the resonance. The circuit model is benchmarked with a full wave simulation, thereby verifying its accuracy. Then it was shown that the proposed technique can efficiently reduce the resonance due to the IC package.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.151-154
• /
• 1999

In this paper, we showed parasitic effects in the millimeter wave package, and proposed a suppression method of parasitic effects using Si lossy layer. From CB-CPW used as a transmission line of the MIMIC package, PPL mode is generated and this causes the parasitic effects considered from this paper. Parasitic effects caused by PPL mode such as resonance, radiation, and crosstalk in the single and multi-chip package ran affect to the performance of MIMIC seriously. To suppress these parasitic effects, we adapted Si lossy layer $\rho$ . The PPL mode can be suppressed by the lossy layer, and it eliminates the parasitic effects. It is expected that showed results ran be used as luxurious data for design MIMICs and various types of millimeter wave applications.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.11
• /
• pp.40-46
• /
• 2002

A MEMS(Micro Electro Mechanical System) package using a doped-silicon(Si) carrier for coplanar microwave and millimeter-wave integrated circuits is proposed in order to reduce parasitic problems of leakage, coupling and resonance. The proposed carrier scheme is verified by fabrication and measuring a GaAs CPW(Coplanar Waveguide) on the three types of Si-carriers(gold-plated high resistivity, lightly doped, high resistivity). The proposed MEMS package using the lightly doped(15 ${\Omega}{\cdot}$) Si-carrier shows parasitic-free performance since the lossy Si-carrier effectively absorbs and suppresses the resonant leakage.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.2
• /
• pp.101-107
• /
• 2002

High performance packages must protect circuits from the internal leakaged-electromagnetic fields as well as the surrounding. In this paper, we characterized an electromagnetically-shielded millimeter-wave ceramic package from 20 to 40 ㎓ using FEM(Finite Element Method). From these calculation results, the parasitic resonance is observed at 33.4 ㎓. We use metal-filled via-holes at the ceramic package walls and resonance has been suppressed in a frequency range from 20 to 40 ㎓. These calculation results will be helpful for MMIC packaging using electromagnetically-shielded millimeter-wave ceramic packages.

• Investigative Magnetic Resonance Imaging
• /
• v.4 no.1
• /
• pp.20-26
• /
• 2000

Gradient moment nulling techniques require the introduction of an additional gradient on each axis for each order of motion correction to be applied. The additional gradients introduce new constraints on the sequence design and increase the demands on the gradient system. The purpose of this paper is to demonstrate techniques for optimization of gradient echo gradient moment nulling sequences within the constraints of the gradient hardware. Flow compensated pulse sequences were designed and implemented on a clinical magnetic resonance imaging system. The design of the gradient moment nulling sequences requires the solution of a linear system of equations. A Mathematica package was developed that interactively solves the gradient moment nulling problem. The package allows the physicist to specify the desired order of motion compensation and the duration of the gradients in the sequence with different gradient envelopes. The gradient echo sequences with first, second, and third order motion compensation were implemented with minimum echo time. The sequences were optimized to take full advantage of the capabilities of the gradient hardware. The sequences were used to generate images of phantoms and human brains. The optimized sequences were found to have better motion compensation than comparable standard sequences.

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.435-438
• /
• 2004

This paper presents a new analytical model to suppress RLC resonance effects in power/ground lines due to a decoupling capacitor. First, the resonance frequency of an RLC circuit which is composed of package inductance. decoupling capacitor, and output drivers is accurately estimated. Next, using the estimated resonance frequency, a suitable decoupling capacitor sire is determined. Then, a novel design methodology to suppress the resonance effects is developed. Finally, its validity is shown by using $0.18 {\mu}m$ process-based-HSPICE simulation.

• Journal of the Korean Magnetic Resonance Society
• /
• v.10 no.1
• /
• pp.1-37
• /
• 2006

General expressions for solid state NMR lines are described for transitions under static, magic angle spinning, and variable angle spinning conditions in the case where the principal axis system for the anisotropic chemical shift tensor is noncoincident with that of the quadrupole coupling tensor. It is demonstrated that solid state NMR powder pattern simulation program VMAS based on the conventional grid point method of integrating over the Euler angle space is fast enough in comparison with the POWDER simulation package and Gauss-point method.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.7 s.349
• /
• pp.29-37
• /
• 2006

This paper presents a new analytical model to suppress RLC resonance effects which inevitably occur in power/ground lines due to on-chip decoupling capacitor and other interconnect circuit parasitics (i.e., package inductance, on-chip decoupling capacitor, and output drivers, etc.). To characterize the resonance effects, the resonance frequency of the circuit is accurately estimated in an analytical manner. Thereby, a decoupling capacitor size to suppress the resonance for a suitable circuit operation is accurately determined by using the estimated resonance frequency. The developed novel design methodology is verified by using $0.18{\mu}m$ process-based-HSPICE simulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.9 s.112
• /
• pp.883-889
• /
• 2006

In this paper, parasitic resonance modes generated in a conductor backed coplanar wave guide(CBCPW) and stripline band pass filter(BPF) and the oscillation phenomena of a 40 GHz power amplifier module(PAM) are analyzed and several methods to suppress them are presented for low-temperature co-fired ceramic(LTCC) based millimeter-wave RF System-in-Package(SiP) applications. Parasitic rectangular wave guide(RWG) modes of the CBCPW structure are completely suppressed in the operation frequency band by decreasing the distance between its vias and by increasing the mode frequency. In the stripline structure, RWG resonance modes are clearly eliminated by removing some vias facing each other and by placing them diagonally. In the case of the 40 GHz PAM, in order to reduce a cross talk due to radiation that is generated from interconnection discontinuities, high isolation structures such as embedded DC bas lines and CPW signal lines are used and then the oscillated PAM is improved.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.3
• /
• pp.182-188
• /
• 2004

We demonstrate a $2.1\;{\times}\;1.0\;{\times}\;0.1cm^3$ sized compact transmitter using LTCC System-in-Package (SiP) technology for 60GHz-band wireless communication applications. For low-attenuation characteristics and resonance suppression of the SiP, we have proposed and demonstrated a coplanar double wire-bond transition and novel CPW-to-stripline transition integrating air-cavities as well as novel air-cavities embedded CPW line. The fabricated transmitter achieves an output of 13dBm at a RF frequency of 62GHz, an IF frequency of 2.4GHz, and a LO frequency of 59.6GHz. The up-conversion gain is 11dB, while the LO signal is suppressed with the image rejection mixer below -21.4dBc, and the image and spurious signals are also suppressed below -31dBc.