• Clinical and Experimental Pediatrics
• /
• v.57 no.8
• /
• pp.363-369
• /
• 2014

Purpose: This study examines changes in developmental profiles of children with language delay over time and the clinical significance of assessment conducted at age 2-3 years. Methods: We retrospectively reviewed the medical records of 70 children (62 male, 8 female), who had visited the hospital because of delayed language development at 2-3 years, and were reassessed at ages 5-6. Language and cognitive abilities were assessed using multiple scales at the initial and follow-up visits. Results: At the initial test, 62 of the 70 children had mental development index (MDI) below 70 of Bayley Scales of Infant Development Test II. Of the 62 children in the follow-up assessment, 30 children (48.4%) remained within the same cognitive range (full-scale intelligence quotient, FSIQ<70 of Wechsler preschool and primary scale of intelligence), 12 had borderline intellectual functioning (FSIQ, 70-85), 6 improved to average intellectual functioning (FSIQ>85), and 5 had specific language impairment, 9 had autism spectrum disorders. At the initial test, 38 of the 70 children had cognitive developmental quotients (C-DQ) below 70. Of the 38 children in the follow-up assessment, 23 children (60.5%) remained within the same cognitive range (FSIQ<70). The correlation coefficient for MDI and FSIQ was 0.530 (P<0.0001) and that for C-DQ and FSIQ was 0.727 (P<0.0001). There was a strong correlation between C-DQ and FSIQ, and a moderate correlation between MDI and FSIQ. Conclusion: Low MDI scores reflect a specific delay in cognitive abilities, communication skills, or both. The C-DQ, receptive language development quotient, and social maturity quotient also help to distinguish between children with isolated language delay and children with cooccurring cognitive impairment. Moreover, changes in the developmental profile during preschool years are not unusual in children with language delay. Follow-up reassessments prior to the start of school are required for a more accurate diagnosis and intervention.

• Applied Chemistry for Engineering
• /
• v.8 no.2
• /
• pp.308-314
• /
• 1997

The effects of catalyst and blocking reagents(BR) on the blocking reactions of TDI and MDI in the preparation of polyurethane varnishes have been studied. It was found that certain types of catalysts, such as 1,4-diazabicyclo[2.2.2]octane(DABCO) and tetramethyl guanidine(TMG), were necessary to complete the NCO blocking reactions. Blocking rate of TMG was shown much faster than that of DABCO. Reactivity increased with the increase of TMG concentration, at least to the concentration of 1%. In case of DABCO, the 0.25% concentration of catalyst showed the highest reactivity. In order to study the steric effects of BR on the blocking reactions, phenol, p-cresol, m-cresol, o-cresol, 2,4-xylenol were used as blocking reagents. As expected, BR which has less steric hindrance showed higher reactivity. The increase in BR concentration and reaction temperature increased the productivity of polyurethanes in this reaction system.

• Journal of Life Science
• /
• v.32 no.11
• /
• pp.855-864
• /
• 2022

The pharmacological efficacy of Dipterocarpus tuberculatus Roxb. has been verified in only several fields including photoaging, inflammation, hepatotoxicity, acute gastritis and osseointegration. To identify the novel functions of Dipterocarpus tuberculatus Roxb. on anti-obesity, inhibitory effect on lipid accumulation and stimulatory effect on lipolysis were investigated in MDI (3-isobutyl-1-methyl-xanthine, dexamethasone, and insulin) stimulated 3T3-L1 adipocytes treated with methanol extracts of Dipterocarpus tuberculatus Roxb. (MED). Lipogenic targets, including lipid accumulation, level of lipogenic transcription factors, and expression of lipogenic regulators, were downregulated in MDI-stimulated 3T3-L1 adipocytes treated with MED without any significant cytotoxicity. Also, MED treatment inhibited the mRNA levels of adipogenic targets including peroxisome proliferator-activated receptor (PPAR)γ and CCAAT-enhancer binding protein (C/EBP) α, as well as lipogeic targets including adipocyte fatty acid binding protein 2 (aP2) and fatty acid synthetase (FAS) in MDI-stimulated 3T3-L1 adipocytes. A similar decrease patterns were detected in Oil red O stained lipid droplets of MED treated MDI-stimulated 3T3-L1 adipocytes. Furthermore, several lipolytic targets, such as cAMP concentration, concentration of free glycerol, expression level of lipases, including ATGL, perilipin and HSL, were upregulated in MDI-stimulated 3T3-L1 adipocytes treated with MED. These results show that MED has a novel role as a lipogenesis inhibitor and lipolysis stimulator in MDI-stimulated 3T3-L1 adipocytes.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.4 no.2
• /
• pp.137-147
• /
• 1994

This study was designed to identify and quantitate airborne isocyanate simultaneously by HPLC. These samples were collected using 1-(2-pyridyl)piperazine(1-2PP) coated glass fiber filter from polyurethane painting works at 8 wood furniture factories in Kimpo and Inchun. The results obtained were as follows : 1. The most suitable mobile phase condition of simultaneously analyzing isocyanates was 0.01 M ammonium acetate buffer ACN(70/30) adjusted to pH 6.2 from the beginning of the analysis to 20 min and 0.01 M ammonium acetate buffer/ACN(50/50) adjusted to pH 6.2 from 21 min to 40 min using the gradient mode. The peaks of isocyanates were able to obtain within 30 min. 2. The recovery efficiencies for 2,6-TDI, 2,4-TDI, HDI and MDI urea derivates spiked at the target concentration on coated glass fiber tillers were 91.00, 93.42, 91.31 and 94.21 %, respectively. 3. The qualitative analysis of the isocyanates samples from polyurethane spray painting works in wood furnture factories identified Ihree isocyanates, 2,6-TDI, 2,4-TDI and MOI. And their concentration ranges were 0-312.6, 0-56.3 and $0-62.1{\mu}g/m^3$, respectively. A disadvantage of using the colorimetric method for isocyanate analysis is its inability of separating isocyanates. This study identified such three isocyanates as 2,6-TDI, 2,4-TDI and MDI from polyurethane spray painting works in wood furniture factories. These isocyanates were successfully quantitated by HPLC by modifying the mobile phase condition and switching to gradient mode.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.4
• /
• pp.37-43
• /
• 2008

The research attempted to develop an eco-friendly wood adhesive based on vegetable oil (soybean oil), the renewable and sustainable natural resources, using ozonification technology for the chemical structure modification. The soybean oils (SBO) were reacted with $O_3$ at the rate of 7.13 g/h for different times, 15 minutes, 30 minutes, 60 minutes, and 120 minutes. Modified chemical structure of the ozonized SBOs were examined by Fourier transform Infrared (FT-IR) spectrum. The FT-IR spectrum of SBO had an absorbance peak at $3010cm^{-1}$ that is the characteristic peak of the unsaturated double bonds. As ozone treatment time increased, the peak of the double bond was disappeared and aldehyde or carboxyl peak appeared at $1700cm^{-1}$. The dry, wet, and cyclic boiling bond strengths of the ozonized SBO mixed with polymeric diphenylmethane-4, 4-diisocyanate (pMDI) were also investigated. In the dry shear test, all strengths met constantly the standard requirement of $7.0kgf/cm^2$ (KS F3101 2006). The bond strengths gradually increased with increasing ozone treatment time. The highest strength showed at 60 minutes ozone treatment and decreased values at 120 minutes. In the cyclic boiling shear test, 30, 60 and 120 minutes exceeded the standard requirement.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.10a
• /
• pp.60-65
• /
• 2003

Semi-Rigid 폴리우레탄 foam의 한 종류인 PIR(Polyisocyanurate) foam은 당량적으로 과량의 MDI가 투입되어 생성된 Isocyanate Trimer(Isocyanurate)가 높은 Char Formation을 형성, 우수한 난연특성, 낮은 SMOKE INDEX, 높은 OXYGEN INDEX를 나타낸다. 국내엔 1988년 단열재용 폴리우레탄 foam으로는 최초로 미국의 UL Mark를 획득하여 건설, 건축등 관련업계에서 요구하는 난연특성 및 단열제로서의 제반요건에 부응하며 꾸준히 연구 개발되어 왔다.(중략)

• CDE review
• /
• v.4 no.2
• /
• pp.36-41
• /
• 1998

To survive in the intensive world wide automotive market, more and more automotive companies are investing their resources into concurrent engineering systems (CE) based on the combined CAD/CAM/CAE/ PDM technology. The main objectives of CE in automotive companies are the quality improvement of products and the reduction of cost and time to market. Remarkable effects are appearing from some of these companies. As shown in this paper, these successful automotive companies have been focusing on establishing the new process and methodology in applying CE into their car development process.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.3 s.131
• /
• pp.22-29
• /
• 2005

This research was carried out not only to examine the proper manufacturing condition for white charcoal board in relation to charcoal particle size and final mat moisture content (FMC), but also to maintain the advantageous properties of white charcoal as a well being building material against the sick house problem. Excellent functional white charcoal board was produced with two groups of FMC 20~25% and FMC 36~60%. The latter showed best results among tested samples in two types which are #40-60type-P15%, M5%, FMC 60% and mixed type-P15%, M5%, FMC36% with non formaldehyde adhesives [MDI (M), poly vinyl acetate emulsion (P)] and three stage pressing cycle of 30-10-$30kgf/cm^2$ (1 min.-1.5 min.-6 min.). The former gave highly acceptable results in two types which are #6 over-M15%FMC25% and mixed type-M25%FMC20%. White charcoal board gave excellent in dimensional stability, gas adsorption and far-infrared emission.

• Journal of Astronomy and Space Sciences
• /
• v.26 no.3
• /
• pp.287-294
• /
• 2009

In helioseismology it is normally assumed that p-mode oscillations are excited in a statistically independent fashion. Unfortunately, however, this issue is not clearly settled down in that two experiments exist, which apparently look in discrepancy. That is, Appourchaux et al. (2000) looked at bin-to-bin correlation and found no evidence that the assumption is invalid. On the other hand, Roth (2001) reported that p-mode pairs with nearby frequencies tend to be anti-correlated, possibly by a mode-coupling effect. This work is motivated by an idea that one may test if there exists an excess of anticorrelated power variations of pairs of solar p-modes. We have analyzed a 72-day MDI spherical-harmonic time series to examine temporal variations of p-mode power and their correlation. The power variation is computed by a running-window method after the previous study by Roth (2001), and then distribution function of power correlation between mode pairs is produced. We have confirmed Roth's result that there is an excess of anti-correlated p-mode pairs with nearby frequencies. On the other hand, the amount of excess was somewhat smaller than the previous study. Moreover, the distribution function does not exhibit significant change when we paired modes with non-nearby frequencies, implying that the excess is not due to mode coupling. We conclude that the origin of this excess of anticorrelations may not be a solar physical process, by pointing out the possibility of statistical bias playing the central role in producing the excess.

• Journal of the Korean Ceramic Society
• /
• v.53 no.1
• /
• pp.1-6
• /
• 2016

In this year, Koreans have a shortage in agricultural and drinking water due to severe algal blooms generated in major lakes. Waste oyster shells were obtained from temporary storage near the workplace at which oysters were separated from their shells. Heating ($1000^{\circ}C$ for 1 h in air) was employed to convert raw oyster shell powders into calcium oxide powders that reacted efficiently with phosphorus and nitrogen to remove algal blooms from eutrophicated wastewater. As the dispersed amount of heated oyster shell powders was increased, water clarity and visual light penetration were improved. Coagulation, precipitation and carbonation process of the heated oyster shell powders in a water purifier facilitated removal of eutrophication nutrient such as phosphorus and nitrogen, which is both beneficial and economically viable. $CO_2$ implantation by carbonation treatment not only produced thermodynamically stable CaO in oyster shells to derive precipitated calcium carbonate (PCC) but also accelerated algal removal by activation of coagulation and precipitation process. The use of oyster shell powders led to a mean reduction of 97% in total phosphate (T-P), a mean reduction of 91% in total nitrogen (T-N) and a maximum reduction of 51% in chemical oxygen demand (COD), compared with the total pollutant load of raw algal solution. Remarkable water quality improvement of algal removal by heated oyster shell powders and PCC carbonation treatment will allow utilization as water resources to agricultural or industrial use.