• The Journal of Engineering Geology
• /
• v.18 no.1
• /
• pp.103-115
• /
• 2008

The purposes of this study are to understand characteristic water-rock interaction mechanisms of groundwater in the granite area of Geochang and Hapcheon areas, Gyeongnam-do and to clarify the origin of fluoride. The possible water-rock interaction process and the source of fluorine were studied using water chemistry, rock chemistry, mineralogy by XRD, and microtexture analysis by backscattered electron image of the electron microprobe. No clear relationships between F and hardness was found. But the fluorine content increases to some extent with pH and well depth. Preferential alteration due to water-rock interaction took place along edges or cleavage, or margins of biotite. Because biotite is highly subject to alteration in granite aquifer, fluorine in groundwater is originated from the leaching of biotite.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.3
• /
• pp.55-60
• /
• 1987

Impacts on ground water quality, growth of crops, and degree of corrosion due to the leachate produced from the contact of rain water with blast furnace slag as an aggragate used for roadway pavement were evaluated. Results from slag and soil leaching tests indicated pH, $SO_4$, $Ca^{{+}{+}}$ and $Mg^{{+}{+}}$ concentrations of ground water could be increased due to the use of slag, and pot test suggested slag would not adversely affect growth of Raphanus Satius L niger. Accelerated corrosion test revealed that slag leachate had a tendency to increase corrosion on cast iron at the beginning, however the degree of corrosion became similar to that experienced in soil after about 50 days at 50 degrees in centigrade.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.532-536
• /
• 2001

LD slag, that is, a by-product of steel making process, has been mainly used as land construction materials. Recently, the seashore application of LD slag was tried in Japan and Korea but the reaction between LD slag and seawater was not studied yet. We tried to clarify the leaching reaction and/or mechanism of LD slag and the reaction between seawater and LD slag. We tried to apply these results to the decarbonization of seawater for seawater magnesia process. The high pH solution(over 12) was injected into the sea water and the pH of mixed liquid was adjusted to 9.8. This mixed solution was aged for 8 hours and the 104ppm of CO$_3$$^{-2}$ in the sea water was decreased to 23ppm with the negligible loss of $Mg^2$$^{+}$. The slag particle was directly inserted into the seawater fur practical application. The 0.5~1mm particles were suitable for decarbonization when 5 grade slags mentioned above were reacted with sea water. In this case, the content of CO$_3$$^{-2}$ in the sea water was 53 ppm with the negligible loss of $Mg^2$$^{+}$ after 8 hours aging. The direct application of slag particle fur the decarbonization of seawater takes more reaction time.ime.

• Journal of Soil and Groundwater Environment
• /
• v.15 no.6
• /
• pp.29-36
• /
• 2010

Several mines including Namil, Solim and Jungbong which are located in the Gyeonggi and Kangwon province have been abandoned and closed since 1980 due to "The promotion policy of mining industry". An enormous amount of mining wastes was disposed without proper treatment, which caused soil pollution in tailing dam and ore-dressing plant areas. However, any quantitative assessment was not performed about soil and water pollution by transporting mining wastes such as acid mine drainage, mine tailing, and rocky waste. In this research, heavy metals in mining wastes were analyzed according to leaching method which used 0.1 N HCl and total solution method which used Aqua-regia to recognize the ecological effect of distance from hot spot. We sampled tailings, rocky wastes and soils around the abandoned mine. Chemical and physical parameters such as pH, electrical conductivity (EC), total organic carbon (TOC), soil texture and heavy metal concentration were analyzed. The range of soil's pH is between 4.3 and 6.4 in the tailing dam and oredressing plant area due to mining activity. Total concentrations of As, Cu, and Pb in soil near ore dressing plant area are 250.9, 249.3 and 117.2 mg/kg respectively, which are higher than any other ones near tailing dam area. Arsenic concentration in tailing dams is 31.0 mg/kg, which is also considered as heavily polluted condition comparing with the remediation required level(RRL) in "Soil environment conservation Act".

• Resources Recycling
• /
• v.10 no.4
• /
• pp.48-57
• /
• 2001

The main consistent materials and main elements of the bottom ash in municipal solid waste incineration ash according to particle size were investigated and the environmental hazards were considered by investigating the content of dioxin and heavy metals in bottom ash and the concentration of heavy metals in its leachate. The main materials of bottom ash are glasses, ceramics, scraps of iron. As the particle size increases, their percentage weight also increases and their percentage weight was over 70% in 4 mesh~25 mm particle size fraction. The main elements of bottom ash are CaO, $SiO_2$, $Fe_2$$O_3$,$ A1_2$$O_3$and the content of CaO decreases and the content of $SiO_2$increases as particle size increases. The heavy metals accumulate in small particle size fraction. The concentration of heavy metals in each leachate by domestic leaching test is almost similar. As the aging period is prolonged, pH of bottom ash lowers gradually and the leached concentration of Cu and Pb diminishes.

• Journal of Soil and Groundwater Environment
• /
• v.22 no.6
• /
• pp.1-11
• /
• 2017

This study was conducted to investigate the performance of four commercial chemical agents in stabilizing arsenic (As) in soil at the forest area near the former Janghang smelter site. After amending the stabilizing agents (A, B, C, and D) into As-contaminated soil samples, synthetic precipitation leaching procedure (SPLP) and solubility bioavailability research consortium (SBRC)-extractable As concentrations significantly decreased except for agent D, which is mainly composed of fly ash and calcium carbonate. Increase of SPLP and SBRC-extractable As concentrations in four soil samples (S1, S2, S3, and J2) was attributed to desorption of As adsorbed on iron oxides due to high pH generated by agent D. It is therefore necessary to consider application conditions according to soil characteristics such as pH and buffering capacity. Results of sequential extraction showed that readily extractable fractions of As in soil (i.e., sum of $SO_4-$ and $PO_4-extractable$ As in soil) were converted into non-readily extractable fractions by amending agents A, B, and C. Such changes in the As distribution in soil resulted in the decrease of SPLP and SBRC-extractable As concentration. A series of follow-up monitoring and management plan has been suggested to assess the longevity of the stabilization treatments in the site.

• Transactions of the Korean hydrogen and new energy society
• /
• v.29 no.6
• /
• pp.549-558
• /
• 2018

The overall efficiency depend on the overpotential of the oxygen evolution reaction in alkaline water electrolysis. Therefore, it is necessary to research to reduce the oxygen evolution overpotential of electrodes. In this study, Ni-Zn-Fe electrodes were prepared by electroplating and the surface area was increased by Zn leaching process. Electroplating variables were studied to optimize the plating parameters(electroplating current density, pH value of electroplating solution, Ni/Fe content ratio). Ni-Zn-Fe electrode, which is electroplated in a modified Watts bath, showed 0.294 V of overpotential at $0.1A/cm^2$. That result is better than that of Ni and Ni-Zn plated electrodes. As the electroplating current density of the Ni-Zn-Fe electrode increased, the particle size tended to increase and the overpotential of oxygen evolution reaction decreased. As reducing pH of electroplating solution from 4 to 2, Fe content in electrode and activity of oxygen evolution reaction decreased.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.1
• /
• pp.16-23
• /
• 2021

Lithium carbonate recovered from the waste solution generated during the lithium secondary battery manufacturing process contains heavy metals such as cobalt, nickel, and manganese. In this study, the recrystallization of lithium carbonate was performed to remove heavy metals contained in the powder and to increase the purity of lithium carbonate. First, the leaching efficiency of lithium carbonate according to pH in the aqueous hydrochloric acid solution was examined, and the effect on the recrystallization of lithium carbonate according to the equivalent and concentration of sodium carbonate was confirmed. As the equivalent and concentration of sodium carbonate increased, the recovery rate of lithium carbonate improved. And the SEM image showed that the crystal shape was changed depending on the reaction conditions with sodium carbonate. Finally, the high purity lithium carbonate of 99.9% or more was recovered by washing with water.

• Journal of the Korean Geosynthetics Society
• /
• v.21 no.3
• /
• pp.29-39
• /
• 2022

The engineering characteristics of synthetic polymer-silica sol, which has the effect of reducing leakage, was evaluate and compared with typical grouting material, the water glass-based SGR injection material in this study. The result of the laboratory tests on strength and durability about the synthetic polymer-silica sol showed more than twice as high as LW-based injection materials in uniaxial compressive strength, significantly lower values in shrinkage rate and permeability. The result of pH was less than 8.5 (the drinking water quality standard). As a result of the leaching test, the Na₂O elution amount of the synthetic polymer-silica sol was measured to be 3 to 4 times smaller than that of the water glass grout. These results be assumed that the synthetic polymer-silica sol has better durability and permeability than those of the typical water glass-based grout.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2C
• /
• pp.89-98
• /
• 2006

In this study, the iron and aluminium electrode was put in marine clay which was taken from south coast in Korea to increase the undrained shear strength by inducing the densification and cementation between clay particles and precipitation which was developed by electrode decomposition. For raising the cementation rate and reducing treatment time, high electric current( 2.5A) was applied in each electrode at semi-pilot scale soil box with marine clay. After the tests, the undrained shear strength was measured at designated points using cone penetration test device and sampling was conducted simultaneously in order to measure water content, pH and electric conductivity which would be the key for configuring the cementation effects indirectly. The iron electrode decomposition test results show that the water content adjacent to anode section decreased in 35% and increased in 13% at cathode section. The measured shear strength however, was increased considerably comparing to initial shear strength because of cementation effect between iron ions and soil particles. In case of aluminium electrode decomposition test, the distribution of measured shear strength and degree of improvement were more homogeneous than iron electrode decomposition test.