• Journal of Electrochemical Science and Technology
• /
• 제6권2호
• /
• pp.65-74
• /
• 2015

This work examines the characterization and corrosion behaviour of laser alloyed UNSG10150 steel with three different premixed composition Zn-Sn binary powders using a 4.4 kW continuous wave (CW) Rofin Sinar Nd:YAG laser processing system. The steel alloyed samples were cut to corrosion coupons, immersed in sulphuric acid (0.5 M H₂SO₄) solution at 30℃ using electrochemical technique and investigated for its corrosion behaviour. The morphologies and microstructures of the developed coated and uncoated samples were characterized by Optic Nikon Optical microscope (OPM) and scanning electron microscope (SEM/EDS). Moreover, X-ray diffractometer (XRD) was used to identify the phases present. An enhancement of 2.7-times the hardness of the steel substrate was achieved in sample A₁ which may be attributed to the fine microstructure, dislocations and the high degree of saturation of solid solution brought by the high scanning speed. At scanning speed of 0.8 m/min, sample A₁ exhibited the highest polarization resistance R_p (1081678 Ωcm² ), lowest corrosion current density i_corr (4.81×10⁻⁸A/cm² ), and lowest corrosion rate Cr (0.0005 mm/year) in 0.5 M H₂SO₄. The polarization resistance R_p (1081678 Ωcm² ) is 67,813-times the polarization of the UNSG10150 substrate and 99.9972% reduction in the corrosion rate.

• 한국위성정보통신학회논문지
• /
• 제10권1호
• /
• pp.29-32
• /
• 2015

운전자의 안전과 편의성을 높이기 위해 통신시스템과 자동차와의 융합의 중요성이 부각되고 있다. 질 높은 서비스를 지원하기 위해 선 차량들 간에 정보가 신뢰성 있게 전달되어야 한다. 따라서 고속주행 환경에서는 채널이 급격하게 변하므로 채널 값을 정확히 추정할 수 있는 기법이 중요하다. 이 논문은 차량용 무선 통신 규격인 IEEE 802.11p에서 시변 채널 추정을 위해 개선된 결정지향 기법인 FADP(Frequency Averaging Data Pilot)를 제안한다. 주파수 대역에서 평균화 과정을 거치고 시간 대역에서 데이터 심벌간의 강한 상관관계를 이용하여 좀 더 정확하게 채널 추정 값을 구하였다. 평균 제곱 오차 및 비트 에러율의 관점에서 기존의 기법들과 비교분석하여 FADP의 성능을 검증하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.973-976
• /
• 2006

The oscillations of the Caspian Sea level represent a result of mutually related hydrometeorological processes. The change in the tendency of the mean sea level variations that occurred in the middle 1970s, when the long-term level fall was replaced by its rapid and significant rise, represents an important indicator of the changes in the natural regime of the Caspian Sea. Therefore, sea level monitoring and long-term forecast of the sea level changes represent an extremely important task. The aim of this presentation is to show the experience of application of satellite altimetry methods to the investigation of seasonal and interannual variability of the sea level, wind speed and wave height, water dynamics, as well as of uplift of the Earth’s crust in different parts of the Caspian Sea and Kara-Bogaz-Gol Bay. Special attention is given to estimates of the Volga River runoff derived from satellite altimetry data. The work is based on the 1992-2005 TOPEX/Poseidon (T/P) and Jason-1 (J-1) data sets.

• Wind and Structures
• /
• 제19권3호
• /
• pp.249-270
• /
• 2014

Through comparing the mean wind profiles observed overland during the passages of four typhoons, and the gradient wind speeds calculated based on the sea level pressure data provided by a numerical model, the present paper discusses, (a) whether the gradient balance is a valid assumption to estimate the wind speed in the height range of 1250 m ~ 1750 m, which is defined as the upper-level mean wind speed, in a tropical cyclone over land, and (b) if the super-gradient feature is systematically observed below the height of 1500 m in the tropical cyclone wind field over land. It has been found that, (i) the gradient balance is a valid assumption to estimate the mean upper-level wind speed in tropical cyclones in the radial range from the radius to the maximum wind (RMW) to three times the RMW, (ii) the super-gradient flow dominates the wind field in the tropical cyclone boundary layer inside the RMW and is frequently observed in the radial range from the RMW to twice the RMW, (iii) the gradient wind speed calculated based on the post-landfall sea level pressure data underestimates the overall wind strength at an island site inside the RMW, and (iv) the unsynchronized decay of the pressure and wind fields in the tropical cyclone might be the reason for the underestimation.

• 디지털융복합연구
• /
• 제12권3호
• /
• pp.249-254
• /
• 2014

무선 랜 시스템은 고속의 데이터를 전송하기 위하여 끊임없이 진화 중이며 통신성능을 향상시키기 위해서는 더욱 정밀한 채널추정이 필수적으로 요구된다. 본 논문에서는 IEEE 802.11 기반 무선 모뎀의 PLCP 구조에서 기존의 긴 훈련심볼만을 이용하여 채널을 추정하는 LS 알고리즘의 성능을 개선하고자 하였다. 48개의 부반송파 중에서 12개의 위치에 짧은 훈련 심볼을 전송하고 있다는 사실을 이용하여 2개의 긴 훈련심볼 뿐만 아니라 하나의 짧은심볼도 함께 사용하여 채널을 추정하는 새로운 LS 추정 알고리즘을 제안하였다. 두 개의 긴 훈련심볼 뿐만 아니라 짧은 훈련 심볼을 이용함으로써 보다 향상된 채널 추정을 제공할 수 있음을 보였으며 제안된 채널 추정알고리즘은 IEEE 802.11p WAVE 차량통신 시스템에도 적용이 가능하리라 생각된다. 또한 학부 및 대학원의 OFDM 관련 채널 추정 교육 시 본 논문의 내용이 유용하게 사용될 수 있을 것이다.

• Nuclear Engineering and Technology
• /
• 제44권8호
• /
• pp.939-944
• /
• 2012

Deposition potential, deposition time, square wave frequency, rotation speed of the rotating disc electrode, and palladium concentration were studied on a Glassy Carbon Electrode (GCE) in 0.01M HCl for the determination of palladium in High Level Nuclear Waste (HLNW) by anodic stripping voltammetry. Experimental conditions were optimized for the determination of palladium at two different, $10^{-8}$ and $10^{-7}M$, levels. Error and standard deviation of this method were under 1% for all palladium standard solutions. The developed technique was successfully applied as a subsidiary method for the determination of palladium in simulated high level nuclear waste with very good precision and high accuracy (under 1 % error and standard deviation).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1907-1909
• /
• 1996

In this paper, ultrsonic detection properties at a premolde joint utilized in a 23kV cables are studied. In a experiment a artificial defect within a joint and a measuring system are builded for generating discharges, gathering data about a detection properties, respectively. The experiment results show that one point detection is not allowed for monitoring a global status of a joint discharges and a detection sensitivity is less than 100pC. And also the attenuation and wave speed at the material of joint insulator are obtained.

• 설비공학논문집
• /
• 제12권8호
• /
• pp.782-790
• /
• 2000

A numerical study has been conducted to characterize the transient pressure in a building water supply system with an air chamber by utilizing a commercial code that employs the method of characteristics. Some results produced for the purpose of verification in the study agree quite well with the previously reported. Several parameters are then varied. Among them are the valve closure time, the wave speed, the static pressure, the polytropic exponent, the air chamber volume, the inner diameter and the shape of orifice in the air chamber, etc, while the water temperature and velocity are kept constant at $20^P{circ}C $,/TEX> and 0.8 m/s, respectively, Results reported in this parametric study may be useful to understand the unsteady behavior of the system.

• Ocean Systems Engineering
• /
• 제12권2호
• /
• pp.247-265
• /
• 2022

In the present study, we focus on the CFD simulations for the performance and the rotor-generated wake of a model-scale wind turbine which was designed for wave tank experiments. The CFD simulations with fully resolved rotor geometry are performed using MARIN's community-based open-source CFD code ReFRESCO. The absolute formulation method (AFM) is leveraged to model the rotating wind turbine. The k - ω SST turbulence model is adopted in the incompressible Reynolds Averaged Navier-Stokes (RANS) simulations. First, the thrust and torque coefficients, C_T and C_P, are calculated at different Tip Speed Ratios (TSR), and the results are compared against the experimental data and previous numerical results. The pressure distribution of the turbine blades at the 70% span is obtained and compared to the results obtained by other tools. Then, a verification study aiming at quantifying the discretization uncertainty of the turbine performance with respect to the grid resolution in the wake region is performed. Last, the rotor-generated wake at the TSR of 7 is presented and discussed.

• Restorative Dentistry and Endodontics
• /
• 제33권1호
• /
• pp.66-75
• /
• 2008

본 연구에서는 근관형성의 치근단 크기가 근관 충전의 치근단 폐쇄에 미치는 영향에 대해 알아보고자 하였다. 36개의 단근관, 단근치를 대상으로 3가지 치근단 크기 (Master apical file : #25, #40, #60)에 따라 3가지 실험군으로 나누어 $Profile^{(R)}$과 $LightSpeed^{(R)}$를 이용하여 근관을 확대하고, Modified continuous wave technique으로 근관충전을 시행하였다. 미세누출의 측정을 위해 실험군당 10개의 치아를 1주일간 India ink에 넣어 색소 침투를 일으키고 치아를 투명화시켜 미세누출의 정도를 측정하였다. 미세누출에 치근단 크기가 미치는 영향을 분석하기 위하여 Kruskal-Wallis one-way ANOVA를 시행하였고, 사후 검정을 위하여 Student-Newman-Keuls method를 시행하였다. 또한, 치아 단면의 형태를 관찰하기 위하여 색소 침투까지 실행된 각 실험군당 2개의 치아를 근첨 1 mm에서 4 mm까지 1 mm간격으로 수평 절단하고 사진 촬영하였다. 각 실험군에서 측정된 미세누출양을 Krustal-Wallis one-way ANOVA에서 분석한 결과 치근단 크기는 유의성 있게 (P < 0.05) 미세누출에 영향을 미쳤으며 치근단 크기가 클수록 미세누출의 평균간과 표준편차 값은 감소하는 경향을 보였다. Student-Newman-Keuls method를 통한 사후 검정에서 치근단 크기가 #25 - #40, #25 - #60에서 유의 한 차이를 보였으며 #40 - #60간에는 통계적인 유의차는 없었다. 단면형태에서는 대부분의 치아에서 난원형의 근관 형태를 관찰 할 수 있었고, 치근단의 크기가 작을수록 성형된 근관에 불규칙한 내면이 존재하였고 gutta-percha나 sealer로 충전되지 않는 recess의 면적이 증가함을 알 수 있었으며 이러한 recess는 미세누출의 통로가 됨을 확인 할 수 있었다. 본 연구 결과, Modified continuous wave technique으로 근관충전시 근관 형성된 치근단 크기가 커질수록 보다 일관되고 성공적 인 결과를 예상할 수 있는 근관충전을 시행할 수 있음을 알 수 있었다.