• Journal of the Korean GEO-environmental Society
• /
• v.11 no.3
• /
• pp.17-22
• /
• 2010

This paper analyzed the characteristics of p-multiplier and the load distribution of H-pile group installed in weathered soil under horizontal loading. The results of this study conducted in pile arrangement ($2{\times}3$, $3{\times}3$), the pile center to center spacing (2D, 4D, 6D), and soil density (relative density: 40%, 80%) were drawn as follows. As to the average horizontal loading applied to each pile in pile groups, the fewer number of piles was, the larger average horizontal resistance became. As the result of analysis on p-y curves of single piles and pile groups according to the pile distance and the soil density, as the pile spacing was increased from 2D to 6D, the interaction coefficients of pile group showed 0.85~0.94 (piles in the front row), 0.57~0.79 (piles in the middle row), and 0.60~0.71 (piles in the rear row) in the loose ground and showed 0.76~0.82 (piles in the front row), 0.58~0.73 (piles in the middle row), and 0.53~0.70 (piles in the rear row) in the dense ground. As above, the wider pile distance was, the larger interaction coefficient value was shown among piles. In addition, piles in the front row showed bigger interaction coefficients than that of piles in the middle and back row.

• The KIPS Transactions:PartA
• /
• v.11A no.2
• /
• pp.115-122
• /
• 2004

In this paper, the multiple-valued adders and multipliers are implemented by current-mode CMOS. First, we implement the 3-valued T-gate and the 4-valued T-gate using current-mode CMOS which have an effective availability of integrated circuit design. Second we implement the circuits to be realized 2-variable 3-valued addition table and multiplication table over finite fields $GF(3^2)$, and 2-variable 4-valued addition table and multiplication table over finite fields $GF(4^2)$ with the multiple-valued T-gates. Finally, these operation circuits are simulated under $1.5\mutextrm{m}$ CMOS standard technology, $15\mutextrm{A}$ unit current, and 3.3V VDD voltage Spice. The simulation results have shown the satisfying current characteristics. The 3-valued adder and multiplier, and the 4-valued adder and multiplier implemented by current-mode CMOS is simple and regular for wire routing and possesses the property of modularity with cell array. Also, since it is expansible for the addition and multiplication of two polynomials in the finite field with very large m, it is suitable for VLSI implementation.

• Communications of the Korean Mathematical Society
• /
• v.32 no.4
• /
• pp.971-977
• /
• 2017

For $p{\in}{\mathbb{N}}^{\ast}$ let ${\Sigma}_{p,0}$ denote the class of meromorphic functions of the form $g(z) ={\frac{1}{z^p}}+a_0+a_1z+{\cdots}$, $z{\in}U$. In the present paper we introduce a new subclass of the class ${\Sigma}_{p,0}$, using the subordination and the operator $J^n_{p,{\lambda}}$. This class will be denoted by $B^n_{p,{\lambda}}({\alpha},h)$ and we study some inclusion properties of this subclass.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.11a
• /
• pp.197-199
• /
• 2014

현재 MPEG에서 표준화 중인 IVC(Internet Video Coding)에서는 기존의 비디오 부호화 표준과 같이 Lagrange 계수 기반의 율-왜곡 최적화(RDO: Rate-Distortion Optimization)를 사용하여 최적의 부호화 모드를 결정하고 있다. RDO를 위하여 픽쳐 타입과 부호화 구조에 따라 미리 결정된 Lagrange 계수가 선택적으로 사용되고 있다. 한편 IVC에서는 저지연 모드 부호화 구조에서 비참조 P 프레임 부호화 기법을 선택적으로 사용하여 상당한 부호화 성능을 얻고 있다. 하지만 Lagrange 계수 선택에서 기존의 P 프레임과는 다른 비참조 P 프레임의 RD 특성이 반영되고 있지 않다. 본 논문에서는 비참조 P 프레임의 RD 특성을 고려하여 기존의 기법을 확장한 새로운 Lagrange 계수 선택 기법을 제안한다. 실험결과 제안기법은 IVC 시험모델 ITM 10.0에서 기존 기법 대비 0.4%의 비트율 감소를 얻을 수 있음을 확인하였다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.5 s.335
• /
• pp.23-30
• /
• 2005

In the construction of an extension field, there is a connection between the polynomial multiplication method and the degree of polynomial. The existing methods, KO and MSK methods, efficiently reduce the complexity of coefficient-multiplication. However, when we construct the multiplication of an extension field using KO and MSK methods, the polynomials are padded with necessary number of zero coefficients in general. In this paper, we propose basic properties of KO and MSK methods and algorithm that can reduce coefficient-multiplications. The proposed algorithm is more reducible than the original KO and MSK methods. This characteristic makes the employment of this multiplier particularly suitable for applications characterized by specific space constrains, such as those based on smart cards, token hardware, mobile phone or other devices.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.163-165
• /
• 2018

GF(p)상 타원곡선 암호(ECC)와 RSA를 단일 하드웨어로 통합하여 구현한 공개키 암호 프로세서를 설계하였다. 설계된 EC-RSA 공개키 암호 프로세서는 NIST 표준에 정의된 소수체 상의 224-비트 타원 곡선 P-224와 2048-비트 키 길이의 RSA를 지원한다. ECC와 RSA가 갖는 연산의 공통점을 기반으로 워드기반 몽고메리 곱셈기와 메모리 블록을 효율적으로 결합하여 최적화된 데이터 패스 구조를 적용하였다. EC-RSA 공개키 암호 프로세서는 Modelsim을 이용한 기능검증을 통하여 정상동작을 확인하였으며, $0.18{\mu}m$ CMOS 셀 라이브러리로 합성한 결과 11,779 GEs와 14-Kbit RAM의 경량 하드웨어로 구현되었다. EC-RSA 공개키 암호 프로세서는 최대 동작주파수 133 MHz이며, ECC 연산에는 867,746 클록주기가 소요되며, RSA 복호화 연산에는 26,149,013 클록주기가 소요된다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.6
• /
• pp.55-60
• /
• 2023

When performing the multiplication m×r=p of two binary numbers m and r on a computer, there is a shift-and-add(SA) method in which no time-consuming multiplication is performed, but only addition and shift-right(SR). SA is a very simple method in which when the value of the multiplier r_i is 0, the result p is only SR with m×0=0, and when r_i is 1, the result p=p+m is performed with m×1=m, and p is SR. In SA, the number of SRs can no longer be shortened, and the improvement part is whether the number of additions is shortened. This paper proposes an SA method to minimize addition based on the fact that setting a smaller number to r when converted to a binary number to be processed by a computer can significantly reduce the number of additions compared to the case of setting a smaller number to r based on the decimals that humans perform. The number of additions to the proposed algorithm was compared for four cases with signs (-,-), (-,+), (+,-), and (+,+) for some numbers in the range [-127,128]. The conclusion obtained from the experiment showed that when determining m and r, it should be determined as a binary number rather than a decimal number.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04a
• /
• pp.382-384
• /
• 2004

최근 인터넷의 발달과 함께 인터넷 상에서의 데이터 보안에 대한 요구가 매우 증가되고 있다. 그래서 공개키 또는 비밀키 알고리즘을 사용하여 데이터 보안을 해결하고 있다. 대부분의 공개키 알고리즘은 모듈러 연산들을 기반으로 살고 있으며 이 중 복잡도가 가장 높은 모듈러 멱승 연산은 모듈러 곱셈 연산을 반복 수행하여 계산된다. 그래서 모듈러 곱셈연산을 효율적으로 계산하기 위한 많은 방법들이 제안되어 왔으며 하드웨어 구현 시 속도와 효율성 문제로 몽고메리 곱셈기에 대한 연구가 주목을 받아 왔다. 현재 몽고메리 곱셈 알고리즘을 이용한 곱셈기는 대부분이 성능과 면적만을 고려한 구조로 보안성 향상을 위해 입력 데이터의 비트수 증가 시 곱셈기의 구조 변경이 요구된다. 따라서 본 논문에서는 비트수 길이가 변하더라도 곱셈기 구조는 변함이 없는 GF(p)상에서의 Scalable한 몽고메리 곱셈기 구조를 제안한다. Sealable한 곱셈기의 구조는 FPGA와 같이 메모리를 포함하는 하드웨어 플랫폼에 적합하다. 제안된 구조는 Xilinx FPGA를 이용하여 하드웨어로 구현하며 ModelSim Tool을 통해 기능 및 타이밍 시뮬레이션을 수행한다.

• Bulletin of the Korean Mathematical Society
• /
• v.52 no.6
• /
• pp.1805-1818
• /
• 2015

In this article, we first consider a linear multiplier fractional q-differintegral operator and then use it to define new subclasses of p-valent analytic functions in the open unit disk U. An attempt has also been made to obtain two new q-integral operators and study their sufficient conditions on some classes of analytic functions. We also point out that the operators and classes presented here, being of general character, are easily reducible to yield many diverse new and known operators and function classes.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.11
• /
• pp.5-19
• /
• 2016

This paper presents the results from three-dimensional finite element (FE) analysis undertaken to provide insight into the lateral behaviors of piled gravity base foundation (GBF) for offshore wind turbine. The piled GBF was originally developed to support the gravity based foundation in very soft clay soil. A GBF is supported by five piles in a cross arrangement to achieve additional vertical bearing capacity. This study considered four different cases including a) single pile, b) three-by-three group pile (with nine piles), c) cross-arrangement group pile (with five piles), and d) piled GBF. All the cases were installed in homogenous soft clay soil with undrained shear strength of 20 kPa. From the numerical results, p-y curves and thus P-multiplier was back-calculated. For the group pile cases, the group effect decreased with increasing the number of piles. Interestingly, for the piled GBF, the P-multipliers showed a unique trend, compared to the group pile cases. This study concluded that the global lateral behaviour of the piled GBF was influenced strongly by the interaction between GBF and contacted soil surface.