• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.4
• /
• pp.392-399
• /
• 2019

The purpose of this study was to evaluate polymerization of TheraCal LC, one of the tricalcium silicate cements. To measure the Vickers hardness number (VHN), the specimens were cured at different light curing time and distance. As a result, the VHN of the upper surface was significantly higher than the lower surface's in all groups (p < 0.05). The VHN of the lower surface was increased significantly with the increase of the light curing time in all distance (p < 0.05). When the distance was more than 4.0 mm at all light curing time, the VHN of lower surface was significantly decreased (p < 0.05). When the specimen was light cured for 20 seconds, the VHN of the lower surface did not exceed 2, which corresponds to 10% of the upper surface's. These results suggested that the 20 second light curing time was not sufficient to polymerize the lower surface under specific conditions and that light-curing time should be increased.

• Journal of Korea Multimedia Society
• /
• v.12 no.9
• /
• pp.1273-1287
• /
• 2009

PEGASIS, a chain-based protocol, forms chains from sensor nodes so that each node transmits and receives from a neighbor. In this way, only one node (known as a HEAD) is selected from that chain to transmit to the sink. Although PEGASIS is able to balance the workload among all of the nodes by selecting the HEAD node in turn, a considerable amount of energy may be wasted when nodes which are far away from sink node act as the HEAD. In this study, DERP (Distance-based Energy-efficient Routing Protocol) is proposed to address this problem. DERP is a chain-based protocol that improves the greedy-algorithm in PEGASIS by taking into account the distance from the HEAD to the sink node. The main idea of DERP is to adopt a pre-HEAD (P-HD) to distribute the energy load evenly among sensor nodes. In addition, to scale DERP to a large network, it can be extended to a multi-hop clustering protocol by selecting a "relay node" according to the distance between the P-HD and SINK. Analysis and simulation studies of DERP show that it consumes up to 80% less energy, and has less of a transmission delay compared to PEGASIS.

• Physical Therapy Korea
• /
• v.26 no.4
• /
• pp.35-41
• /
• 2019

Background: Obstacle training affects lower limb muscle activity, balance, reducing the risk of falls, and making gait more stable. Objects: This study aimed to investigate the effects of aquatic and ground obstacle training on balance and muscle activity in patients with chronic stroke. Methods: The study subjects included 30 patients with stroke, who were divided into aquatic ($n_1=15$) and ground ($n_2=15$) groups. Groups underwent obstacle training three times per week, 30 min per session, for six weeks that went as follows: walking over sites with the paralyzed leg, stepping onto and down from a box step, and walking over obstacles with the non-paralyzed leg. Results: The experimental results were obtained by comparing muscle activity. Activity of the rectus femoris, biceps femoris, tibialis anterior, and gastrocnemius were significantly increased in the aquatic group (p<.05). Activity of the biceps femoris and tibialis anterior were significantly increased in the ground group (p<.05); however, the rectus femoris and gastrocnemius were not significantly different. In the comparison of maximal distance regarding the limits of stability, it was significantly increased on the non-affected side, affected side, and anterior and posterior distance in the aquatic group (p<.05). It was significantly increased in the non-affected side and anterior and posterior distance the ground group (p<.05); however, maximal distance on the affected side distance was not significantly different. Conclusion: Gait training with aquatic and ground obstacles is effective for improving balance and gait ability of patients with stroke. However, it was more effective for the aquatic group than for the ground group.

• Journal of the Korean Society of Physical Medicine
• /
• v.16 no.1
• /
• pp.33-39
• /
• 2021

PURPOSE: This study compared the body composition according to the sport of short-distance and middle & long-distance athletes to identify the factors that affect the body composition. METHODS: Forty-eight athletes selected as youth national athletes in 2019 participated in the study. The study participants measured the length of the lower extremities, body composition, and anaerobic ability. An independent sample t-test was conducted to compare the body composition according to the event. In addition, the Pearson correlation was performed to identify the factors that influence the body composition. RESULTS: The leg length of the Short and Middle & long-distance athletes were similar (p = .584). On the other hand, there were differences in the body fat percentage (p = .001), lean percentage (p = .001), and BMI (p = .001). In addition, the body fat percentage was correlated with the lean body mass (r = .419) and BMI (r = .447). Furthermore, the lean body mass was correlated with the BMI (r = .849) and the peak power (r = .662) and mean power (r = .686) of the anaerobic capacity. Moreover, the BMI was correlated with the peak power (r = .490) and mean power (r = .543) of the anaerobic capacity. The peak power of the anaerobic ability was correlated with the mean power (r = .931). CONCLUSION: The body composition differed according to the sport. The body fat percentage correlated with the lean body mass and the BMI. The lean body mass correlated with the BMI, peak power of anaerobic ability, and mean power. The BMI correlated with the anaerobic capacity.

• Journal of Korean Physical Therapy Science
• /
• v.19 no.1
• /
• pp.55-62
• /
• 2012

Objectives : The purpose of this study was to determine the effects of high heeled shoes on the static & dynamic balance performance and electromyography(EMG) of back and lower extremity muscles. Materials & Methods : Sixteen women participated in this study. Subjects were composed two groups with LL shoes group and higher heel shoes group. We carried out Romberg's test and muscle activity of left and right Paraspinalis, Quadriceps femoris, Tibialis anterior, Gastrocnemius muscles by EMG in order to determine static balance performance according heel height. Using by Biorescue(Incenierie company), we trained subject to transfer of COG each direction(Anterior, posterior, Right, Left), we carried out this test for distance, surface, distance/surface in order to determine dynamic balance performance according heel height. The data were analyzed by independent t-test between lower and high heel height using SPSS(ver. 17.0)/PC program. Results : There was significant difference of distance(p<.05) of weight perturbation between lower and high group in dynamic balance performance and EMG value of left Gastrocnemius(p<.05), both Tibialis anterior(p<.05) muscle in static balance performance. Conclusions : Height of heel has effect on dynamic balance performance in distance of the Anterior, posterior direction. EMG of Gastrocnemius and Tibialis anterior muscles were affected by Romberg's test.

• Bulletin of the Korean Mathematical Society
• /
• v.58 no.5
• /
• pp.1279-1300
• /
• 2021

Let P be a finite point set in ℝ² with the set of distance n-chains defined as ∆_n(P) = {(|p₁ - p₂|, |p₂ - p₃|, …, |p_n - p_n+1|) : p_i ∈ P}. We show that for 2 ⩽ n = O_|P|(1) we have ${\mid}{\Delta}_n(P){\mid}{\gtrsim}{\frac{{\mid}P{\mid}^n}{{\log}^{\frac{13}{2}(n-1)}{\mid}P{\mid}}}$. Our argument uses the energy construction of Elekes and a general version of Rudnev's rich-line bound implicit in [28], which allows one to iterate efficiently on intersecting nested subsets of Guth-Katz lines. Let G is a simple connected graph on m = O(1) vertices with m ⩾ 2. Define the graph-distance set ∆_G(P) as ∆_G(P) = {(|p_i - p_j|)_{i,j}∈E(G) : p_i, p_j ∈ P}. Combining with results of Guth and Katz [17] and Rudnev [28] with the above, if G has a Hamiltonian path we have ${\mid}{\Delta}_G(P){\mid}{\gtrsim}{\frac{{\mid}P{\mid}^{m-1}}{\text{polylog}{\mid}P{\mid}}}$.

• Journal of Navigation and Port Research
• /
• v.32 no.4
• /
• pp.271-277
• /
• 2008

When performing steering by an autopilot (automatic steering gear), a sensitivity adjustment is mainly determined by P value and D value. These values differ in the optimal combination by model of ship and external forces. This research was carried out simulation case studies and examined movement of Pure Car Carrier, which easily received ship by wind pressure influence in low speed We investigated the relation of horizontal migration(transfer) of ship's body and P-D value. Based on it, four parameters of P-D at approaching berth could be suggested Hence there were suggestions of parameters; Distance to maximum lee point, Time to maximum lee point, Time to return to original course and Time to 300th second. The correlation of these parameters and P-D value were also considered. As a result, we think that this index, like formulated P-D, leads to an easy and safe navigation by utilizing these indices.

• The Journal of Advanced Prosthodontics
• /
• v.13 no.2
• /
• pp.107-116
• /
• 2021

PURPOSE. Several studies focused on the accuracy of intra-oral scanners in implant dentistry, but the data of inter-implant distances were not widely mentioned. Therefore, this study aimed to evaluate the effect of distance between two implants on the surface distortion of scanned models generated by intra-oral scanners. MATERIALS AND METHODS. Three models with the distances between two fixed scan bodies of 7, 14, and 21 mm were fabricated and scanned with a highly precise D900L dental laboratory scanner as reference models. Fifteen scans were performed with TRIOS3 and CEREC Omnicam intra-oral scanners. Trueness, precision, and angle deviation of the test models were analyzed (α=.05). RESULTS. There was a significant difference among inter-implant distances in both intraoral scanners (P<.001). The error of trueness and precision increased with the increasing inter-implant length, while the angle deviation did not show the same trend. A significant difference in the angle deviation was found among the inter-implant distance. The greatest angle deviation was reported in the 14-mm group of both scanners (P<.05). In contrast, the lowest angle deviation in the 21-mm group of the TR scanner and the 7-mm of the CR scanner was reported (P<.001). CONCLUSION. The inter-implant distance affected the accuracy of intra-oral scanner. The error of trueness and precision increased along with the increasing distance between two implants. However, the distortions were not clinically significant. Regarding angle deviation, the clinically significant angle deviation may be possible when using intra-oral scanners in the partially edentulous arch.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.2
• /
• pp.61-69
• /
• 2020

Purpose: Zirconia fixed partial dentures with mandibular 2^nd premolar and 2^nd molar as abutments are fabricated and then the effects of inter-abutment distance on fracture resistance of zirconia fixed partial dentures is studied. Materials and Methods: The materials used in this study are Cameleon S zirconia block and S2 zirconia block, which are divided into CS Group and S2 Group applying different inter-abutment distance for each material, and the sintered zirconia fixed partial denture was luted to the epoxy resin die using a temporary luting cement, and then the fracture resistance was measured by placing a 6 mm diameter hardened steel ball on the occlusal surfaces of the pontics and applying pressure at a cross head speed of 1.0 mm/min on a universal testing machine with a load cell of 5.0 kN. Results: The fracture resistance of zirconia fixed partial dentures is not significantly affected by inter-abutment distance The fracture resistance of zirconia fixed partial dentures in CS Group was significantly higher in 15 mm of inter-abutment distance than in 13 mm and 17 mm of inter-abutment distance (P < 0.05). The fracture resistance of zirconia fixed partial dentures in S2 Group was not significantly different between the three groups (P > 0.05). Conclusion: The fracture resistance of zirconia fixed partial dentures with mandibular 2^nd premolar and 2^nd molar as abutments does not significantly affected by the inter-abutment distance.

• Journal of Oral Medicine and Pain
• /
• v.20 no.2
• /
• pp.291-306
• /
• 1995

Mandibular movement is composed of border movement and functional movement. Border movement such as maximal mouth opening, hinge opening ad lateral eccentric movement has good reproducibility, but functional movement such as chewing, swallowing and speech has also reproducibility. Especially for chewing movement, individual reproducibility has been confirmed by many studies. Study of chewing pattern is still in controversy. In new approach for raising the diagnostic value, numeric parameters and morphologic characteristics could be used for evaluation of chewing pattern. This study was performed to investigate the differences between chewing pattern in controls and in patients with temporomandibular disorders. Sixty-three patients with temporomandibular disorders participated in this study, and they were divided into unilaterally affected subjects or bilaterally affected subjects. Then unilaterally affected subjects were classified into closed lock group, disk displacement with reduction group, and degenerative joint disease group. For recording of chewing pattern, subjects were asked to chew one piece of presoftened chewing gum on both sides, and the chewing movement was recorded with the Electrognatho- Graphy(Bio-Research Associates Inc., U.S.A.). Tooth contact pattern for occlusal stability (Total left-right statistics )was also recorded with T-Scan(Tekscan Co., U.S.A.). The dta related to chewing pattern and total left-right statistics were statistically analyzed by SAS/stat program. The obtained results were as follows : 1. In patient group, mean value of A-P distance and the ratio of A-P distance to vertical distance were larger than control group, but the value of lateral distance in affected side and the closing velocity in unaffected side were smaller than that of control group, respectively. 2. In case of unilateral affected patients, chewing pattern of other side had tendency to restricted movement and slow velocity in closed lock group or degenerative joint disease group than control group or disk displacement with reduction group. 3. In bilateral degenerative joint disease patients, contralateral side had tendency to large range of motion and slow chewing velocity than preferred chewing side. 4. The patients with restricted mouth opening below than 35mm had higher value of total left-right statistics than patient group mouth opening above 35mm. Also closed lock group had higher total left-right statistics than disk displacement with reduction group, degenerative joint disease group and control group. 5. There was some difference in morphologic characteristics of chewing pattern between in control group and in affected side of unilateral patient group, but no difference between control group and unaffected side of unilateral patient group. 6. There were positive correlations between vertical distance and A-P distance, between vertical distance and chewing velocity, between A-P distance and chewing velocity, and between opening velocity and closing velocity in unilateral affected patients.