• 한국전기전자재료학회논문지
• /
• 제17권11호
• /
• pp.1167-1173
• /
• 2004

This paper reports the variations of varistor voltage, nonlinear exponent, leakage current, and dissipation factor against surge stress of ZnO-P $r_{6}$ $O_{11}$-CoO-C $r_2$ $O_3$-E $r_2$ $O_3$(ZPCCE)-based varistors manufactured with the variations of sintering temperature. It was found that the variations of electrical parameters against surge stressing current of 100 A/$\textrm{cm}^2$(8x20 ${\mu}\textrm{s}$) is not so large under the surge stress of 700 times. Among varistors, specially the varistor sintered at 134$0^{\circ}C$ exhibited the smallest variations, with %$\Delta$ $V_{lmA}$=+0.23%, %$\Delta$$\alpha$=+0.23%, %$\Delta$ $I_{L}$=0%, %$\Delta$tan$\delta$=-6.94%. The clamping voltage ratio( $V_{c}$/ $V_{lmA}$) of all varistors was less than 2.2.2.2.2.2.2.

• 한국대기환경학회지
• /
• 제24권4호
• /
• pp.415-422
• /
• 2008

This study was carried out to investigate the effect of operating and design conditions of gas dispersion type of absorber on $SO_2$ removal efficiency. pH difference between upper and lower part of gas dispersing plate of absorber was 0.2, which was relatively low. This was supposed that recirculation capacity of absorbing liquid between froth zone and reaction zone of absorber be increased by oxidation air injection through liquid riser which acted as liquid pump. Test results showed that $SO_2$ removal efficiency was more sensitive than absorber ${\Delta}P$. High $SO_2$ removal even at lower pH resulted from very low concentration of $HSO_3^-$ ion in absorbing liquid because of direct supply of dissolved oxygen into froth zone. 96% of $SO_2$ removal efficiency was obtained under the condition of absorber pH 5.2, flue gas flow rate of $1,530\;Nm^3/hr$, inlet $SO_2$ concentration of 800 ppm, absorber ${\Delta}P$ of 250mmAq. The following equation by a multiple linear regression was obtained to describe the relationship between $SO_2$ removal and operating variables. $$f=1-{\exp}(-1.3939+1.060pH+0.0139{\Delta}P-0.00267G-0.000064SO_2Conc.),\;R^2=0.9719$$

• 한국조리학회지
• /
• 제13권2호
• /
• pp.254-259
• /
• 2007

최소가공 감자의 갈변을 억제하기 위해 감자를 박피 절단하여 다양한 농도의 citrate buffer와 phosphate buffer로 각각 처리한 후 저밀도 폴리에틸렌 포장지로 밀봉하여 $5^{\circ}C$와 $20^{\circ}C$에 저장하면서 실험에 사용하였다. 최소가공 처리 된 감자를 24시간 저장 후 색도 변화를 측정한 후 ${\Delta}L$값과 ${\Delta}E$ 값을 계산하여 갈변 효과를 조사한 결과, citrate buffer 처리구가 phosphate buffer 처리구에 비하여 전반적으로 우수한 갈변억제 효과를 나타내었으며, 동일 buffer에서 pH가 낮을수록 우수한 효과를 나타내었다. Citrate buffer, pH 3.0에 처리 후 $5^{\circ}C$에 저장한 조건이 대조구에 비하여 약 35배 이상의 효과를 나타내어 가장 우수한 갈변억제능을 나타내었다. 농도별 처리에서는 citrate buffer(pH 3.0)에서 전반적으로 우수한 갈변억제 효과를 나타내고 있었으나, 0.5 M의 농도에서는 phosphate buffer(pH 5.0) 처리구가 더욱 우수한 갈변억제 효과를 나타내었다.

• The Journal of Advanced Prosthodontics
• /
• 제7권5호
• /
• pp.368-374
• /
• 2015

PURPOSE. The aim of the study was to evaluate the effect of abutment shade, ceramic thickness, and coping type on the final shade of zirconia all-ceramic restorations. MATERIALS AND METHODS. Three different types of disk-shaped zirconia coping specimens (Lava, Cercon, Zirkonzahn: ${\phi}10mm{\times}0.4mm$) were fabricated and veneered with IPS e.max Press Ceram (shade A2), for total thicknesses of 1 and 1.5 mm. A total of sixty zirconia restoration specimens were divided into six groups based on their coping types and thicknesses. The abutment specimens (${\phi}10mm{\times}7mm$) were prepared with gold alloy, base metal (nickel-chromium) alloy, and four different shades (A1, A2, A3, A4) of composite resins. The average $L^*$, $a^*$, $b^*$ values of the zirconia specimens on the six abutment specimens were measured with a dental colorimeter, and the statistical significance in the effects of three variables was analyzed by using repeated measures analysis of variance (${\alpha}$=.05).The average shade difference (${\Delta}E$) values of the zirconia specimens between the A2 composite resin abutment and other abutments were also evaluated. RESULTS. The effects of zirconia specimen thickness (P<.001), abutment shade (P<.001), and type of zirconia copings (P<.003) on the final shade of the zirconia restorations were significant. The average ${\Delta}E$ value of Lava specimens (1 mm) between the A2 composite resin and gold alloy abutments was higher (close to the acceptability threshold of 5.5 ${\Delta}E$) than th ose between the A2 composite resin and other abutments. CONCLUSION. This in-vitro study demonstrated that abutment shade, ceramic thickness, and coping type affected the resulting shade of zirconia restorations.

• 동의신경정신과학회지
• /
• 제21권3호
• /
• pp.45-64
• /
• 2010

Objectives : The purpose of this study was to examine the effects of auricular acupuncture at the Shinmun on patients with dementia by using power spectrum analysis. Electroencephalogram(EEG) power spectrum show site-specific and state-related differences in various frequency bands. Methods : Study was carried out in 38 subjects.(31 patients with dementia and 7 normal people, 27 females and 11 males ; mean age=75.9 years old). To know the effect of auricular acupuncture at the Shinmun in patients with dementia, we measured electroencephalogram(EEG) of normal people and patients with dementia about 'before', 'after' and 'after 15 minutes' giving auricular acupuncture at the Shinmun, and compared the brain wave($\alpha$, $\beta$, $\delta$, $\theta$) of EEG 30 channels. Results : In the case of patients with dementia, in the power values of $\alpha$(alpha) band at F4, FP2, FCZ, F8, FC4 channels (p<0.05) during the Shinmun-auricular acupuncture treatment increased significantly. In $\beta$(beta) band, the power values at T8 channel(p<0.05) during the Shinmun-auricular acupuncture treatment increased significantly. In $\delta$(delta) band, the power values at F7, FP1, FZ, FP2, FCZ, C4, FC4, CP4, T8, P7, P3, O1, OZ, O2, P4, P8 channels(p<0.05) during the Shinmun-auricular acupuncture treatment decreased significantly. In $\Theta$(theta) band, the power values at O1, OZ, O2channel(p<0.05) during the Shinmun-auricular acupuncture treatment decreased significantly. Conclusions : Through these results, we concluded that auricular acupuncture at the Shinmun on patients with dementia could have effect the functional mechanism of the cerebral cortex.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권9호
• /
• pp.1355-1360
• /
• 2008

Effects of dietary ${\delta}$-aminolevulinic acid (ALA) supplementation on serum iron status, blood characteristics, egg production and quality were examined in laying hens in an 8-week feeding trail. Two hundred and forty (Hy-line brown, 40-week-old) layers were randomly assigned to four dietary treatments with ten replications (six layers in adjacent three cages). Dietary treatments included: 1) CON (basal diet), 2) ALA1 (CON+ALA 5 ppm), 3) ALA2 (CON+ALA 10 ppm) and 4) ALA3 (CON+ALA 15 ppm). All nutrient levels of diets were formulated to meet or exceed NRC (1994) recommendations for laying hens. During the entire experimental period, differences of serum iron concentration and total iron binding capacity (TIBC) were significantly increased in ALA1 supplemented treatment (quadratic effect, p<0.05). The difference of total protein between 8 and 0 weeks was significantly higher in ALA2 treatment than CON treatment (quadratic effect, p<0.05). No significant effects were observed on hemoglobin, WBC, RBC, lymphocyte and albumin concentrations. Egg production and egg weight were not influenced by the ALA supplementation. Egg yolk index was also significantly higher in ALA3 treatment than CON treatment at the end of 4 and 8 weeks (linear effect, p<0.05). Haugh unit was increased in ALA3 treatment compared to CON and ALA1 treatments at the end of 8 weeks (linear effect, p<0.05). However, egg shell thickness, breaking strength and yolk color unit were not affected by the ALA supplementation. In conclusion, dietary ALA supplementation at a level of 5 ppm can affect iron concentration in serum while higher levels (10 or 15 ppm) have some beneficial influences on blood profiles and egg quality.

• Geomechanics and Engineering
• /
• 제6권5호
• /
• pp.419-436
• /
• 2014

Soil improvement by preloading with PVD in combination with vacuum is helpful when a considerable load is required to meet the desired rate of settlement in a relative short time. To facilitate the vacuum propagation, vertical drains are usually employed in conjunction. This ground improvement method is more and more applied in the Mekong delta of Vietnam to meet the needs of fast infrastructure development. This paper reports on a pilot test that was carried out to investigate the effect of ground improvement by vacuum and PVD on the rate of consolidation at the site of Saigon International Terminals Vietnam (SITV) in Ba Ria-Vung Tau Province, Viet Nam. Three main aspects of the test will be presented, and namely, instrumentation and field monitoring program, calculation of consolidation settlement and back-analysis of soil properties to see the difference before and after ground improvement.

• Journal of Photoscience
• /
• 제12권3호
• /
• pp.113-117
• /
• 2005

Spectroscopic investigations on the interaction of gabapentin (GBP) with bovine serum albumin (BSA) were reported. The association constant of GBP-BSA system was determined at different temperatures (298, 302, 306 and 311 K) based on the fluorescence quenching results. The GBP was found to quench the fluorescence of BSA through static mechanism. Thermodynamic parameters, the standard enthalpy change, $({\Delta}H^o)$ and the standard entropy change $({\Delta}S^o)$ were observed to be $-9.61{\pm}0.008\;kJ\;mol^{-1}$ and $3.58{\pm}0.011\;Jmol^{-1}K{-1}$ respectively. These indicated that the hydrophobic and electrostatic forces played a role in the interaction of GBP with BSA. The negative value of ${\Delta}G^o$ revealed that the binding reaction is spontaneous. The circular dichroism studies indicated the conformational changes in BSA upon interaction with GBP. The effect of some metal ions on the binding constant was also investigated.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.349-356
• /
• 2010

In this study, a new design method of pile bent structure considering plastic hinge was proposed on the basis of the beam-column model. Based on the analysis results, it is found that the positioning of plastic hinge on the pile bent structure was influenced by nonlinear behavior of material and p-$\Delta$ effect. Moreover, concrete cracking began to occur at the joint section between the pile and column in case of pile bent structure with different cross-sections. The plastic hinge can be developed on the pile bent structure when large displacement was occurred, and pile bent structures can be maintained well only if it is developed on the column part. Therefore, in this study, the optimized cross-section ratio between column and pile was analyzed to induce the plastic hinge at the joint section between the pile and column. Based on this, the optimized diameter ratio of pile and column can be obtained below the inflection point of the bi-linear curve depending on the relations between column-pile diameter ratio($D_c/D_p$) and normalized lateral cracking load ratio($F/F_{Dc=Dp}$). And through this study, it is founded that in-depth limit($L_{As}$=0.4%) normalized by the pile length($L_P$) are proportionally decreased as the pile length($L_P/D_P$) increases up to $L_P/D_P$=17.5, and beyond that in-depth limit converges to a constant value. Finally, it is found that the proposed limit depth by taking into account the minimum concrete-steel ratio would be more economical design of the pile bent structure.

• 한국전기전자재료학회논문지
• /
• 제31권6호
• /
• pp.377-385
• /
• 2018

For the investigation of dopant profiles in implanted $Si_{1-x}Ge_x$, the implanted B and As profiles are measured using SIMS (secondary ion mass spectrometry). The fundamental ion-solid interactions of implantation in $Si_{1-x}Ge_x$ are discussed and explained using SRIM, UT-marlowe, and T-dyn programs. The annealed simulation profiles are also analyzed and compared with experimental data. In comparison with the SIMS data, the boron simulation results show 8% deviations of $R_p$ and 1.8% deviations of ${\Delta}R_p$ owing to relatively small lattice strain and relaxation on the sample surface. In comparison with the SIMS data, the simulation results show 4.7% deviations of $R_p$ and 8.1% deviations of ${\Delta}R_p$ in the arsenic implanted $Si_{0.2}Ge_{0.8}$ layer and 8.5% deviations of $R_p$ and 38% deviations of ${\Delta}R_p$ in the $Si_{0.5}Ge_{0.5}$ layer. An analytical method for obtaining the dopant profile is proposed and also compared with experimental and simulation data herein. For the high-speed CMOSFET (complementary metal oxide semiconductor field effect transistor) and HBT (heterojunction bipolar transistor), the study of dopant profiles in the $Si_{1-x}Ge_x$ layer becomes more important for accurate device scaling and fabrication technologies.