• 보존과학연구
• /
• 통권31호
• /
• pp.31-42
• /
• 2010

This study were performed thermal shock test for four kind of different rocks (Iksan granite, Namsan granite, Jeongseon marble, Yeongyang sandstone), and according to heating temperature($400^{\circ}C$, $600^{\circ}C$) on samples were investigated physical properties such as specify gravity, porosity, p-wave velocity. As a result, the tendency was appeared that porosity increased, and specific gravity and p-wave velocity decreased at a more higher temperature. But, the situation of change appeared characteristic according to temperature and rock types. In the case of Yeongyang sandstone, it appeared in especially porosity increasing at $400^{\circ}C$. The specific gravity was little change in the all the rock at $400^{\circ}C$ but the decreased at $600^{\circ}C$. Therefore the specific gravity in the temperature range is due to the relatively small impact on the change is expected. Porosity of the granite at $400^{\circ}C$ changes little. but marble in the rate of change is large. Conversely, the sandstone porosity decreased. At $600^{\circ}C$ increased porosity in all of rocks. particularly sandstone the smallest increase in porosity. Experiments showed that p-wave velocity measured through dry rocks was sensitive to quantify the thermal damage. The p-wave velocity of all rocks decreased with increasing temperature. In the relation between porosity and p-wave velocity, p-wave velocity decreased with increasing porosity. On the other hand, in case of Yeongyang sandstone p-wave velocity decreased with decreasing porosity. thus, development of microcracks more affects p-wave velocity than porosity. In this study, damage intensity was well explained with porosity and p-wave velocity values depending on temperature increase.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표대회 논문집(III)
• /
• pp.725-730
• /
• 1998

Recently, non-destructive tests are getting popular in evaluating concrete properties without braking specimens. Among several NDT methods, P-wave velocity measurement technique has been widely used to evaluate the stiffness and strength of concrete. The purpose of this study is to investigate factors influencing P-wave velocity measured by impact-resonant method and ultrasonic pulse velocity method, such as moisture content of concrete, existence and size of coarse aggregates, sensor and sampling rate. Test results show that rod-wave velocity measured by impact-resonant method and ultrasonic pulse velocity are significantly affected by the moisture content of concrete, i.e., the lower moisture content, the lower velocity. Moisture content influences rod-wave velocity stronger than ultrasonic pulse velocity. Rod-wave velocity is faster in concrete than in mortar and is also faster in concrete containing small size aggregates. Sensor and sampling rate have little influence on velocity.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.392-399
• /
• 2005

Shear modulus (or rigidity) of dam material is an important parameter which can be directly associated with the deformation of dam. Seepage or leakage of water can cause the defects or cracks of dam body. The existence of cracks and rigidity of dam body are decisive information for the estimation of dam safety. Rigidity of material is mainly determined from S-wave velocity and the defects of dam body can be detected by seismic reflection survey. Therefore, seismic reflection survey will be a desirable method which can give a solution about dam safety problem. Among various physical properties of dam body, S-wave velocity is the most important information but it is not easy to get the information. In this study, diverse measuring techniques of S-wave reflection survey were attempted to get the information about S-wave velocity of dam body. Ultimately, S-wave velocity could be estimated by the analysis of SH reflection events which can be easily observed in shot gather data obtained from SH measuring technique. Meanwhile, P-wave reflection survey was also performed at the same profile. P-beam radiation technique which can reduce the surface waves and reinforce the P-wave reflection events was applied for giving a help to analyse P-wave velocity. In the end, P-and S-wave velocity, Vs/Vp, Poisson's ratio distribution of the vertical section under the profile could be acquired.

• Earthquakes and Structures
• /
• 제23권4호
• /
• pp.353-361
• /
• 2022

The dynamic behavior of a single pile was investigated by using analytical and numerical studies. The focus of this study was to develop the dynamic p-y curve of a pile for pseudo-static analysis considering the shear wave velocity of the soil by using three-dimensional numerical analyses. Numerical analyses were conducted for a single pile in dry sand under changing conditions such as the shear wave velocity of the soil and the acceleration amplitudes. The proposed dynamic p-y curve is a shape of hyperbolic function that was developed to take into account the influence of the shear wave velocity of soil. The applicability of pseudo-static analysis using the proposed dynamic p-y curve shows good agreement with the general trends observed by dynamic analysis. Therefore, the proposed dynamic p-y curve represents practical improvements for the seismic design of piles.

• 한국지반공학회논문집
• /
• 제25권11호
• /
• pp.53-60
• /
• 2009

터널의 시공은 항상 주변 암반의 손상을 초래한다. 발생하는 손상의 정도는 주변암반의 역학적 및 수리학적 거동에 영향을 미친다. 본 논문에서는 크로스홀 시험을 통하여 P 파 속도를 측정하여 터널주변 암반의 손상을 계측하였다. 발진공에서의 탄성파 신호발생을 위하여 기계적인 충격을 가하였으며 그 결과로 발생된 P파 신호는 잡음이 적으며 파의 초동 도달시간 판별이 용이하였다. 실험결과 암반의 손상이 예상되는 구간에서 P 파의 속도가 낮게 검측 되었다. 크로스홀 공 내 다중의 지점에서 P 파 계측을 수행하여 이차원 P 파 토모그래피를 생성하였는데, 생성된 토모그래피는 터널 배면의 암반 손상이 발생한 구간에 대한 가시적인 결과를 나타내었다. 측정된 P파의 속도로부터 간극율 또는 Q 값과의 상관관계를 통해 암반 특성의 정량적인 손상 평가가 가능하였다.

• Geomechanics and Engineering
• /
• 제14권4호
• /
• pp.399-406
• /
• 2018

The influences of mineral content and porosity on ultrasonic wave velocity were assessed for ten hornfelsic rocks collected from southern and western parts of the city of Hamedan, western Iran. Selected rock samples were subjected to mineralogical, physical, and index laboratory tests. The tested rocks contain quartz, feldspar, biotite, muscovite, garnet, sillimanite, kyanite, staurolite, graphite and other fine grained cryptocrystalline matrix materials. The values of dry unit weight of the rocks were high, but the values of porosity and water absorption were low. In the rocks, the values of dry unit weight are related to the presence of dense minerals such as garnet so not affected by porosity. The statistical relationships between mineral content, porosity and ultrasonic wave velocity indicated that the porosity is the most important factor influencing ultrasonic wave velocity of the studied rocks. The values of P-wave velocity of the rocks range from moderate to very high. Empirical equations, relevant to different parameters of the rocks, were proposed to determine the rocks' essential characteristics such as primary and secondary wave velocities. Quality indexes (IQ) of the studied samples were determined based on P-wave velocities of them and their composing minerals and the samples were classified as non-fissured to moderately fissured rocks. Also, all tested samples are classified as slightly fissured rocks according to the ratio of S-wave to P-wave velocities.

• International Journal of Railway
• /
• 제1권2호
• /
• pp.64-71
• /
• 2008

The quality of track-bed fills of railways has been controlled by field measurements of density $({\gamma}_d)$ and the results of plate-load tests. The control measures are compatible with the design procedures whose design parameter is $k_{30}$ for both ordinary-speed railways and high-speed railways. However, one of fatal flaws of the design procedures that there are no simple laboratory measurement procedures for the design parameters ($k_{30}$ or, $E_{v2}$ and $E_{v2}/E_{v1}$) in design stage. A new quality control procedure, in parallel with the advent of the new design procedure, is being proposed. This procedure is based upon P-wave velocity involving consistently the evaluation of design parameters in design stage and the field measurements during construction. The Key concept of the procedure is that the target value for field compaction control is the P-wave velocity determined at OMC using modified compaction test, and direct-arrival method is used for the field measurements during construction. The procedure was verified at a test site and the p-wave velocity turned out to be an excellent control measure. The specifications for the control also include field compaction water content of OMC${\pm}$2% as well as the p-wave velocity.

• 지구물리와물리탐사
• /
• 제14권4호
• /
• pp.305-315
• /
• 2011

암석시료에 대한 음파 속도측정의 정확성을 검증하고 정밀한 측정을 위한 기초적인 실험의 일환으로 아크릴과 스테인리스강 재질의 시료에 대하여 길이와 축하중을 달리하여 각각에 대해 3회씩 측정한 총 864 경우에 대하여, 시험편을 통과한 초동 주시를 측정하고 분석하였다. 축하중이 가해진 상태에서의 S-파 측정은 P-파에 비해 측정에 어려움이 있었으며 이에 따라 반복측정, 길이, 축하중에 의한 편차도 S-파가 훨씬 크게 나타났다. 또한, 재질에 따라서는 스테인레스강 시편보다는 아크릴 시편의 초동주시 편차가 약 2배 정도 양호하게 나타났으며 이는 아크릴 시험편의 경우가 트랜스 듀서와 시험편 간의 접촉 coupling이 안정적이며 또한 동일한 시간 분해능이나 유사한 전기적 잡음에 비하여 초동 주시가 길기 때문으로 판단된다. 실험결과, 아크릴 시험편과 스테인리스강 시험편의 탄성파 속도를 측정할 때는 60 ~ 90 mm 정도의 길이를 갖는 시험편을 20 kg (27.7 $N/cm^2$) ~ 30 kg (41.6 $N/cm^2$) 내외의 축하중 하에서 측정하는 것이 가장 좋으며, 스테인리스강 시험편의 S-파 속도는 길이 50 mm 이하의 시험편을 사용하여 측정해야 한다. 이러한 실험 결과는 암석 코어의 속도 측정시 시스템 지연의 측정 및 보정에 활용될 수 있을 것이다.

• 지구물리
• /
• 제8권2호
• /
• pp.67-74
• /
• 2005

SH파 굴절법 토모그래피와 표면파 분산자료 역산을 통하여 2차원 S파 속도단면을 각각 구하였고, 비교 목적으로 P파 속도단면도 함께 구하였다. P파와 표면파는 지표에 수직하게 타격하여 발생시켰으며, 100 Hz와 4.5 Hz 수직지오폰 24개로 각각 수신하였다. SH파는 50 kg 나무원목의 좌우를 타격하여 발생시켰고, 8 Hz 수평 지오폰으로 수신하였으며, 좌측타격에서 우측타격을 빼주어 SH파 신호를 강화하였다. 초동주시 토모그램과 표면파 분산곡선으로부터 역산과정을 거쳐서 구한 S파 속도단면을 비교한 결과, 두 단면의 전체적인 양상은 서로 비슷하지만, 표면파 역산으로 구한 S파 속도단면이 전반적으로 작은 값을 갖는 경향을 보인다. 잡음에 취약한 SH파는 P파 및 PS 변환파 도달 이후에 기록되어 초동선택이 어려운 문제가 있으며, 균질한 수평모델을 가정하는 표면파의 분산곡선 역산은 측방 변화가 심한 곳에서 지하구조를 정확히 밝히는데 한계가 있음을 보인다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2007년도 공동학술대회 논문집
• /
• pp.151-156
• /
• 2007

In December 2006, 2D surface streamer and Ocean Bottom Seismometer (OBS) data were acquired in the Ulleung basin in Korea where strong Bottom Simulating Reflectors (BSR) were shown as a result of 2D and 3D multichannel (MCS) reflection survey. The aim of this study is to provide another reliable source for estimating P wave velocity around BSR depth using OBS data in addition to velocity information from 2D surface seismic data. Four OBSs were deployed and four 20-km shot lines which pass two OBSs respectively were designed. To derive P wave velocity profile, interactive interval velocity analysis using ${\tau}$-p trajectory matching method (Kumar, 2005) was used for OBS data and semblance analysis was used for surface data. The seismic profiles cross the OBS instruments in two different directions yield recordings for four different azimuths. This raised the confidence for the results. All velocity profiles in the vicinity of BSR depth of four OBS sites show almost definite velocity changes which we could consider as upper BSR and free gas layer. Making comparison between velocity from OBS and that from 2D seismic semblance velocity analysis gives consistency in result.