• 제목/요약/키워드: ozone water cleaning

검색결과 39건 처리시간 0.027초

저온수열원이용 열펌프시스템의 전처리 및 성능분석 (Performance Analysis and Prior-Treatment of Heat Pump System with Low-Temperature Water Heat Source)

  • 박성룡;장기창;이상남;라호상;박준택
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2000년도 춘계학술대회논문집B
    • /
    • pp.258-263
    • /
    • 2000
  • River water is higher in temperature than the surrounding environment during the winter. It is highly suitable a heat source for heat pump system. Despite its suitability, however, it is not widely used, due to its fouling and corrosive nature in heat exchanger tubes of evaporator. It is designed prior-treatment system which come into direct contact with the river water, such as auto-seamer, ozone generator for bactericidal test and auto-cleaning system. And it is analyzed treatment effects for its operation. It is designed two-stage compression heat pump system using R-134a with heating load 35.16kW, ad analyzed its performance. As a result it is obtained 3.08 COP when mid-point pressure is 1,200kPa, and bypass ratio of flowing refreigerant to high-stage compressor is 25.1%

  • PDF

Reduction of Microflora in the Manufacture of Saengshik by Hygienic Processing

  • Bang, Woo-Seok;Eom, Young-Rhan;Oh, Deog-Hwan
    • Preventive Nutrition and Food Science
    • /
    • 제12권3호
    • /
    • pp.167-172
    • /
    • 2007
  • This study was conducted to determine the effect of hygienic processing (HP) on the reduction of microorganisms during manufacturing of saengshik with two vegetables (carrots and cabbage) and two grains (barely and glutinous rice) compared to general processing (GP). For GP, distilled water was used for washing raw materials and equipment. For HP, aqueous ozone (3 ppm) in combination with 1% citric acid and 70% alcohol were used for washing raw materials and the equipment, respectively. In carrots, after cutting, total aerobic bacteria (TAB), yeast and mold (YM) and coliforms were significantly increased to 5.19, 8.04 and 2.08 ($log_{10}$ CFU/g), respectively (p<0.05). Washing effectively reduced the increased microorganisms from cross contamination during cutting, but cross contamination increased with subsequent GP drying and milling procedures to 8.56, 8.27 and 3.71 ($log_{10}$ CFU/g) for TAB, YM and coliforms, respectively (p<0.05). On the other hand, HP washing of carrots with 3 ppm ozone in combination with 1% citric acid showed higher antimicrobial effect than GP washing, significantly decreasing the number of microorganisms (p<0.05). Further cross contamination did not occur through drying and milling due to cleaning the equipments with 70% alcohol prior to processing. After milling, the number of TAB, YM and coliforms were significantly decreased to 3.89, 4.47 and not detectable level ($log_{10}$ CFU/g), respectively (p<0.05). Similar results were observed in cabbage and grains. During storage for two months at different temperatures (22 or $4^{\circ}C$), there were no changes in numbers of spoilage microorganisms in the packaged saengsik after either processing. This suggests the importance of HP for the reduction of microorganisms during saengsik production, and demonstrates the effectiveness of disinfection at each processing stage in minimizing contamination levels to enhance microbial safety of saengshik products.

The Characteristics of Charging Water Spray at Electrostatic Precipitator

  • Chung, J.H.;Kanazawa, S.;Ohkubo, T.;Nomoto, Y.;Adachi, T.
    • 한국안전학회지
    • /
    • 제9권4호
    • /
    • pp.132-136
    • /
    • 1994
  • The new spray system is proposed by using a pipe with hygroscopic needle electrode In order to develop an air-cleaning ESP with high collection efficiency for submicron particles and high removal efficiency for NOx, SO$_2$, NH$_3$. Fundamental characteristics of charging water spray, which is not an usual wet type, are investigated experimentally. As a result, corona discharging mode and ozone generation rate are significantly affected by the operational conditions, such as the applied voltage and wet condition of the needle electrode.

  • PDF

Indoor Emission Characteristics of Liquid Household Products using Purge - and - Trap Method

  • Kwon, Ki-Dong;Jo, Wan-Kuen
    • Environmental Engineering Research
    • /
    • 제12권5호
    • /
    • pp.203-210
    • /
    • 2007
  • Since the emissions composition from the household products have potentially been associated with health risks for building occupants, the chemical composition emitted from the products should be surveyed. The current study identified the emission composition for 42 liquid household products, using a purge-and-trap method. This evaluation was done by classifying the household products into five product classes (deodorizers, household cleaners, color removers, pesticides, and polishes). Nineteen compounds were chosen on the basis of selection criteria. The quality control program for purge-and-trap and analytical systems included tests of laboratory blank Tenax traps and blank water samples, and the determination of calibration equation, measurement precision, method detection limit (MDL), and recovery. The number of chemicals varied according to the product categories, ranging from 4 for the product category of bleaches to 12 for the product categories of air fresheners and nail color removers. For all product categories, the emission composition and concentrations varied broadly according to product. It is noteworthy that most household products emit limonene: 19 of 25 cleaning products; 5 of 6 deodorizers; 1 of 3 pesticides; 3 of 3 color removers; and 4 of 5 polishes. It was suggested that the use of household products sold in Korea could elevate the formation of secondary toxic pollutants in indoor environments, by the reaction of limonene with ozone, which entered indoor environments or might be generated by indoor sources such as electronic air cleaning devices and copying machines.

세척처리에 따른 수삼 표면의 미생물 제어효과 (Reduction of Microbial Populations on the Surface of Fresh Ginseng by Various Washing Treatments)

  • 김희수;김은정;최정희;홍석인;정문철;김동만
    • 한국식품저장유통학회지
    • /
    • 제17권3호
    • /
    • pp.405-409
    • /
    • 2010
  • 현재 대부분의 수삼은 흙이 묻은 상태로 유통되고 있는데 소비자의 편이성을 고려하여 수삼을 세척한 후 포장한 상태로 유통시키기 위한 연구의 일환으로 수삼의 세척처리 방법에 따른 표면세척효과 및 미생물 감균 효과를 조사하였다. 수확 직후 수삼의 부위별 생균수는 5.85~6.63 log CFU/ea범위로 뇌두 부위가 가장 많았고 다음으로는 지근과 주근 순이었다. 부위별 곰팡이 수는 3.67~5.12 log CFU/ea범위로 뇌두 부위가 많았으며 주근과 지근은 거의 유사한 수준이었다. 수삼표면을 상압살수, 고압살수 및 솔질 처리를 하였던 바 고압살수처리에 의해 세척도가 증가하고, 표면 미생물을 감소시킬 수 있었으나 그 효과는 솔질처리의 경우보다는 낮았다. 세척한 수삼의 표면 미생물 수를 더 낮추기 위해 부가적으로 에탄올용액, 차아염소산나트륨 용액, 과산화수소용액, 전해산화수, 오존수 및 중온수를 각각 처리하였던 바 전해산화수 처리 시 생균수와 곰팡이 수가 세척한 수삼에 비해 각각 0.79 CFU/ea, 0.51 log CFU/ea 정도 감소하여 다른 처리구에 비하여서는 우수하였으나 처리구간의 통계적인 유의성은 인정되지 않았다.

자연공원내 주요 음용수의 수질환경평가 (Water Quality Assessment of Major Drinking Waters in Natural Parks)

  • 이영경;이병인;홍성철
    • 한국도시환경학회지
    • /
    • 제18권4호
    • /
    • pp.439-453
    • /
    • 2018
  • 본 연구에서는 자연공원내 주요 음용수에 대한 수질특성을 평가하여 기초정보를 제공함과 적절한 관리방안을 제언하는데 그 목적이 있다. 분석결과 미생물은 자연공원이라는 지리적 특성상 대부분 검출되는 것으로 나타났고, 일부 대상지에서는 현재 자외선살균기 및 오존처리를 시행하고 있듯이 기타 주요 음용수에도 확대하여 사용하는 것이 적절한 것으로 판단된다. 또한 가정에서 음용시 끓여 마심으로 자연소독을 하는 것이 적절한 것으로 판단되며, 탁도 등이 일부 먹는 물 수질기준(샘물)을 초과하는 것으로 나타났으나, 음용수 주변의 환경정화 등으로 개선할 수 있는 것으로 판단된다. 전반적으로 자연공원내 주요 음용수는 먹는물 수질기준(샘물)에 적합한 것으로 나타났고, 청소 등의 정기적인 관리와 개선이 필요한 것으로 판단된다.

중수도개발연구(中水道開發研究) (A Study on the Water Reuse Systems)

  • 박중현;이성기;정재철
    • 대한토목학회논문집
    • /
    • 제4권4호
    • /
    • pp.113-125
    • /
    • 1984
  • 우리 나라는 수공급(水供給)을 주로 댐개발(開發)에 의존(依存)하여 왔으나 이와 같은 방식(方式)은 앞으로 댐적지(適地)의 감소(減少), 건설비(建設費)의 앙등(昻騰), 수몰지역주민(水沒地域住民)의 생활재건대책(生活再建對策), 환경영향(環境影響) 등의 제요인(諸要因)으로 인하여 계속하여 개발(開發)하기 어려운 상황(狀況)에 있다. 한편 수수요(水需要)는 도시(都市)로의 인구집중(人口集中), 생활수준(生活水準)의 향상(向上), 산업발전(産業發展) 등으로 인하여 계속 증가(增加)되고 있으며 앞으로도 인구(人口)의 증가(增加)와 경제활동(經濟活動)의 고도화(高度化)에 따른 도시기능(都市機能)의 향상(向上)에 의해 증가(增加)될 것으로 예상(豫想)된다. 따라서, 앞으로 늘어날 수수요(水需要)에 대처(對處)하기 위해서는 지하수(地下水)의 개발(開發), 해수(海水)의 담수화(淡水化), 그리고 물을 순환재이용(循環再利用)하는 중수도(中水道)의 도입(導入)이 절실(切實)하며 그 연구(硏究) 또한 시급하다. 중수도(中水道)란 종래(從來) 수도(水道)에 의해서 급수(給水)되고 있던 용도(用途)가운데 반드시 음용수(飮用水)와 같은 정도(程度)의 청정(淸淨)을 요(要)하지 않는 용도(用途)에 대(對)하여 각(各) 용도(用途)에 적합(適合)한 수질(水質)의 중수(中水)를 공급(供給)하는 것으로써 사람이 마시기에 적합(適合)하지 않은 물을 공급(供給)하는 시설(施設)의 총체(總體)라고 정의(定義)한다. 이와 같은 중수도(中水道)의 용도(用途)로는 수세식(水洗式) 변소용수(便所用水), 에어컨냉각용보급수(冷却用補給水), 세차용수(洗車用水), 살수용수(撒水用水), 가로청소용수(街路淸掃用水), 조경용보급수(造景用補給水), 소화용수(消火用水) 등을 들 수 있으며, 원수(原水)로는 건물내(建物內)에서 발생(發生)하는 잡배수(雜排水), 수세식(水洗式) 변소용수(便所用水), 냉동냉각배수(冷凍冷却排水), 하수처리수(下水處理水), 오탁하천수(汚濁河川水), 그리고 우수(雨水), 지하수(地下水) 등을 생각할 수 있다. 그러나, 원수(原水)를 선정(選定)할 때는 수질(水質)과 함께 수량(水量)이 풍부(豊富)한가에 대해서도 고려(考慮)하여야 한다. 중수도(中水道)의 형태(形態) 및 분류(分類)는 개방계(開放系) 순환방식(循環方式)과 폐쇄계(閉鎖系) 순환방식(循環方式)으로 대별(大別)되며, 이를 규모(規模)에 따라 개별순환방식(個別循環方式), 지구순환방식(地區循環方式), 광역순환방식(廣域循環方式)의 3 가지로 나눈다. 중수도처리방식(中水道處理方式)은 활성오니법(活性汚泥法), 회전원판법(回轉圓板法), 접촉폭기법(接觸曝氣法)을 포함(包含)한 생물화학적(生物化學的) 처리법(處理法)과 의집심의법(擬集沈擬法), 사려과법(砂濾慮過法), 활성탄처리법(活性炭處理法), ozone 처리법(處理法), 염소처리법(鹽素處理法), 막처리(膜處理) 등을 포함(包含)한 물리화학적(物理化學的) 처리법(處理法)으로 대별(大別)된다. 또한 현재(現在) 외국(外國)에서 실시(實施)하고 있는 중수도(中水道)의 예(例) 조사(調査)하였으며, 중수도이용(中水道利用)의 효과(效果)를 직접적(直接的) 효과(效果)와 부수적(附隨的) 효과(效果)로 나누어 기술(記述)하였다. 또한 중수도(中水道) 개발시(開發時)의 문제점(問題點)을 순환방식별(循環方式別)로 조사(調査)하였으며, 기술(技術), 위생(衛生), 관리상(管理上)의 문제(問題)와 비용문제(費用問題), 법령상(法令上)의 문제(問題)를 다루었다. 중수도(中水道)를 개발(開發)하기 위해 사업자(事業者)(설치자(設置者))와 행정기관(行政機關)의 역할(役割) 중수도(中水道)를 위한 시설(施設)의 구조기준(構造基準) 및 유지관리기준(維持管理基準), 재정적(財政的) 조치(措置) 등에 대해서 연구(硏究)하였다.

  • PDF

염색폐수의 처리를 위한 세라믹 분리막에 대한 고찰 (A Review on Ceramic Based Membranes for Textile Wastewater Treatment)

  • 곽연수;라즈쿠마 파텔
    • 멤브레인
    • /
    • 제32권2호
    • /
    • pp.100-108
    • /
    • 2022
  • 다양한 산업 중에서 섬유 산업은 섬유 염색을 위해 가장 많은 양의 물을 사용하는데, 이는 여러 종류의 염료를 포함한 폐수의 방대한 배출로 이어진다. 염료의 제거를 위한 방법에는 오존 처리, 흡착 등의 다양한 처리 방법이 존재한다. 하지만 이러한 처리 방법은 폐수 재사용의 문제로 인해 처리 가격이 상승하기 때문에 성공적이지 못하다. 이에 대한 대안으로 막분리 공정이 폐수의 염료 처리를 위한 가장 적절한 기술로 보고되고 있다. 이때 사용되는 분리막은 고분자 분리막과 세라믹 분리막으로 나눌 수 있다. 세라믹 분리막의 장점에는 세척의 용이함, 긴 수명, 내열성, 내화학성, 그리고 기계적 안정성이 있다. 세라믹 분리막은 다양한 원료로 만들 수 있으며, 점토, 제올라이트, 플라이 애시와 같은 천연 재료는 저렴하고 구하기 용이하다. 본 리뷰에서 폐수처리는 크게 한외여과(ultrafiltration), 정밀여과(microfiltration), 그리고 나노여과(nanofiltration) 세가지 공정으로 나누어져 있다.

무창 비육돈사에서 습식공기정화기의 여름철 공기정화효율 분석 (An Air Cleaning Efficiencies of Wet Air Cleaner in the Windowless Swine Fattening Stall in Summer)

  • 오인환;이종현;이경훈;이정훈;이동섭;어성만;이미림
    • 한국축산시설환경학회지
    • /
    • 제12권3호
    • /
    • pp.133-140
    • /
    • 2006
  • The climate of stall significantly influences on animal production ability. High concentration of ammonia gas, $CO_2$ and lots of dust are found in modern densely raising stall system, as results, they provide a negative influence on animal and farmer health, and production ability. Therefore, it is necessary to keep clean the inside air of stall to increase the productivity. An air cleaner of wet type, consisting of a fan, a motor, rotating discs, a dust collector, a water bowl, an ozone generator etc, has been developed to clean the stall air. The work principle is that the inside air is sucked through the fan, and the rotating discs make water into fineness spray and blow into the stall. The rest water flows down to the dust collector. In the present study, we measured the dust, ammonia gas, odor, temperature and humidity in a swine stall that were installed two wet air cleaners with 700 fattening swine with On-mode and Off-mode of wet air cleaners. The dust measure was divided into 3 categories, TSP, $PM_{10}$, and $PM_{2.5}$. In summer, the TSP in on-mode were maximum $0.259mg/m^3$ and minimum $0.128mg/m^3$, and the average was $0.195mg/m^3$. These are comparable to the data from Off-mode stall that maximum $0.308mg/m^3$, minimum $0.139mg/m^3$, and average $0.277mg/m^3$. However, $PM_{10}$ and $PM_{2.5}$ showed any significant differences between the tests. The concentrations of ammonia gas in Off-mode stall were maximum 13.8 ppm and minimum 5.9 ppm, and the average was 8.47 ppm. However in On-mode stall the ammonia gas concentrations were maximum 10.5 ppm and minimum 5.5 ppm, and the average was 7.63 ppm. The concentration of ammonia gas in On-mode was 10% in average lower than off-mode stall. Odor was measured by olfactometer. In the Off-mode stall, the odor unit were maximum 420 $Ou/m^3$ and minimum $300\;OU/m^3$, and the average was $367\;OU/m^3$, but in the On-mode stall the odor unit were maximum $330\;OU/m^3$ and minimum $210\;OU/m^3$, and the average was $253\;OU/m^3$. Odor removal efficiency was about 31% in On-mode stall.

  • PDF