• Korean Chemical Engineering Research
• /
• 제40권6호
• /
• pp.664-668
• /
• 2002

본 연구에서는 전해 도금되어진 활성탄소섬유(activated carbon fibers; ACFs)가 NO 환원거동에 미치는 영향에 대하여 고찰해보았다. 전해도금 시간이 증가함에 따라 탄소표면의 구리의 양은 점차 증가하였으나, 활성탄소섬유의 흡착 특성인 잘 발달된 비표면적 등의 기공구조는 약간씩 감소하는 경향을 보였다. 본 실험 결과, ACFs 및 ACFs/Cu 촉매 표면에서 $500^{\circ}C$로 NO를 반응시켰을 때 NO가 $N_2$ 및 $O_2$로 환원되는 것을 확인하였다. 특히, ACFs/Cu 촉매를 사용한 반응에서는 촉매반응 중 발생하는 산소를 촉매표면에서 잡아주는 역할을 하는 것으로 관찰되었다. 이는 NO환원에 있어서 ACFs와 ACFs/Cu 촉매 사이에 다른 기작이 있다는 것을 보여주는 것으로 생각되어진다.

• 한국수자원학회논문집
• /
• 제52권3호
• /
• pp.207-217
• /
• 2019

본 연구는 도시 산업지역의 넓은 불투수 지역뿐만 아니라 좁은 지역의 도로 교량이 통과되는 하천유역에서 발생되는 비점오염원을 초기우수로부터 저감시킴으로써 하천수질의 오염을 줄일 수 있는 저감장치를 개발하여 실용화하고자 한다. 이를 위해 본 연구의 선행연구에서 취득한 자료를 기반으로 현장 성능시험용 저감장치를 개발하여 생화학적 산소요구량(BOD), 화학적 산소요구량(COD), 총질소(T-N)와 부유물질(SS)의 저감효율에 대한 성능시험을 실시하였다. 성능분석 결과는 시간구간별 시험항목의 분석에서 그 성능이 우수한 것으로 확인되었다. 그 결과는 국립환경 과학원에서 제안한 비점오염 저감시설의 요구 저감효율을 충족시키는 것으로 나타나 실무활용이 가능할 것이다.

• 공업화학
• /
• 제7권3호
• /
• pp.554-564
• /
• 1996

페롭스카이트 $La_{0.6}Sr_{0.4}Co_{1-x}Fe_xO_3$(x=0.00, 0.01, 0.10, 0.20, 0.35, 및 0.50)를 산소전극물질로 사용하여 알칼리형 연료전지에서의 산소환원반응을 연구하였다. Fe치환에 따른 촉매특성의 변화를 X-선회절분석법(XRD), 열중량분석법(TG) 및 승온환원법(TPR)을 통하여 조사하였다. XRD 구조분석을 통하여 페롭스카이트 단위격자의 격자상수값을 측정할 수 있었다. TG 실험결과 Fe는 페롭스카이트 구조내에서 크게 안정화되어 $900^{\circ}C$까지 거의 환원되지 않았고, Fe치환량 증가에 따라 Co-O간의 결합에너지가 증가하여 고온에서 제거되는 산소종의 양이 증가하였다. TPR 실험결과, ${\alpha}$-(저온피크)와 ${\beta}$-(고온피크)산소종이 존재하였다. ${\beta}$-산소종은 Co와 강하게 결합되어 있는 산소종으로서 Fe치환량 증가에 따라 결합세기가 증가하였다. ${\alpha}$-산소종은 가역적으로 격자내외를 출입하는 산소환원반응의 활성종이었으며, Fe치환량 증가에 따른 격자상수의 증가는 금속과 ${\alpha}$-산소종간의 결합에너지로 볼 수 있는 ${\alpha}$산소종의 환원피크를 저온으로 이동시킴으로써 산소환원반응의 활성을 증가시켰다. 반면에, Fe치환량 증가에 따른 ${\alpha}$-산소종의 감소는 산소환원반응의 활성을 감소시켰으며, Fe치환에 따른 표면적의 증가는 반응활성에 크게 영향을 미치지 못하였다.

• 한국표면공학회지
• /
• 제40권2호
• /
• pp.91-97
• /
• 2007

In this study we investigated the oxygen effect on the nucleation and its residual stress during unbalanced magnetron sputtering. Up to 0.5% in oxygen flow rate, cubic phase (c-BN) was dominated with extremely small fraction of Hexagonal phase (h-BN) of increasing trend with oxygen concentration, whereas hexagonal phase is dominated beyond 0.75% flow rate. Interestingly, the residual stress in cubic-phase-dominated films was substantially reduced with small amount of oxygen (${\sim}0.5%$) down to a low value comparable to the h-BN case. This may be because oxygen atoms break B-N $sp^3$ bonds and make B-O bonds more favorably, increasing $sp^2$ bonds preference, as revealed by FTIR and NEXAFS. It was confirmed by experimental facts that the threshold bias voltage for nucleation and growth of cubic phase were increased from -55 V to -70 V and from -50 V to -60 V respectively. The reduction of residual stress in O-added c-BN films is seemingly resulting from the microstructure of the films. The oxygen tends to increase slightly the amount of h-BN phase in the grain boundary of c-BN and the soft h-BN phase of 3D network including surrounding nano grains of cubic phase may relax the residual stress of cubic phase.

• Journal of Ceramic Processing Research
• /
• 제19권5호
• /
• pp.372-377
• /
• 2018

MgO or gadolinium-doped ceria (GDC, $Ce_{0.9}Gd_{0.1}O_{2-{\delta}}$) was added as a promoter to improve the oxygen transfer kinetics of $MgMnO_3$ oxygen carrier material for chemical looping combustion. Neither MgO nor GDC reacted with $MgMnO_3$, even at the high temperature of $1100^{\circ}C$. The average oxygen transfer capacities of $MgMnO_3$, 5 wt% $MgO-MgMnO_3$, and 5 wt% $GDC-MgMnO_3$ were 8.74, 8.35, and 8.13 wt%, respectively. Although the addition of MgO or GDC decreased the oxygen transfer capacity, no further degradation was observed during their use in 5 redox cycles. The addition of GDC significantly improved the conversion rate for the reduction reaction of $MgMnO_3$ compared to the use of MgO due to an increase in the surface adsorption process of $CH_4$ via oxygen vacancies formed on the surface of GDC. On the other hand, the conversion rates for the oxidation reaction followed the order 5 wt% $GDC-MgMnO_3$ > 5 wt% $MgO-MgMnO_3$ >> $MgMnO_3$ due to morphological change. MgO or GDC particles suppressed the grain growth of the reduced $MgMnO_3$ (i.e., (Mg,Mn)O) and increased the specific surface area, thereby increasing the number of active reaction sites.

• Bulletin of the Korean Chemical Society
• /
• 제31권11호
• /
• pp.3399-3402
• /
• 2010

• Bulletin of the Korean Chemical Society
• /
• 제17권9호
• /
• pp.781-786
• /
• 1996

Mass transport behavior of C60 films on electrodes with different thicknesses has been studied by an Electrochemical Quartz Crystal Microbalance (EQCM) during electrochemical reduction-oxidation processes in the presence of water. C60 films were found to be reduced in the presence of water and they remains quite stable. In thin films, the mass on electrode decreased after a complete cycle while X-ray Photoelectron Spectroscopy (XPS) study does not support the existence or formation of C60-epoxides during electrochemical reduction processes in the presence of water or oxygen.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.411.1-411.1
• /
• 2016

In this study, we examined the effects of boron doping on the dielectric reliability of solution processed aluminum oxide ($Al_2O_3$). When boron is doped in aluminum oxide, the hysteresis reliability is improved from 0.5 to 0.4 V in comparison with the undoped aluminum oxide. And the accumulation capacitance is increased when boron was doped, which implying the reduction of the thickness of dielectric film. The improved dielectric reliability of boron-doped aluminum oxide is originated from the small ionic radius of boron ion and the stronger bonding strength between boron and oxygen ions than that of between aluminum and oxygen ions. Strong boron-oxygen ion bonding in aluminum oxide results dielectric film denser and thinner. The leakage current of aluminum oxide also reduced when boron was doped in aluminum oxide.

• Environmental Analysis Health and Toxicology
• /
• 제17권4호
• /
• pp.357-362
• /
• 2002

Tests for the toxicity of tributyltin (TBT) were conducted on mysid collected from Dadepo beach, Pusan, Korea. The toxic effects of tributyltin on the survival, growth and oxygen consumption of the mysid, Neomysis awatschensis have been evaluated. Mysids were exposed to several concentrations of TBT (0, 0.56, 1.15, 3.07 and 6.12 $\mu\textrm{g}$/L) for 6 weeks. Survival rate was decreased with increases in concentration and exposure time and the reduction of more than 40％ occurred at TBT concentration greater than 1.15 $\mu\textrm{g}$/L after 6 weeks. Growth rate was significantly decreased at concentrations greater than 1.15 $\mu\textrm{g}$/L. Oxygen consumption rate was also decreased in a concentration-dependent way and significantly decreased to 39,47 and 69％ of the control at 1.15, 3.07 and 6.12 $\mu\textrm{g}$/L, respectively. These results indicate that the contamination of aquatic environment by TBT has the potential to significantly reduce coastal and estuaries recruitment of mysids.

• 한국세라믹학회지
• /
• 제28권6호
• /
• pp.495-501
• /
• 1991

This study is intended to make defect-free region, denuded zone at the silicon wafer surface for semiconductor device substrates. In this experiment, initial oxygen concentration of starting material CZ-grown silicon wafer, various heat treatment combinations, denuding ambient and the amounts of oxygen reduction were measured, and then denuded zone (DZ) formation and depth were investigated. In Low/High anneal (DZ formation could be achieved), the optimum temperature for Low anneal was 700$^{\circ}C$∼750$^{\circ}C$. In case of High anneal, with the time increased, DZ depth was increased at 1000$^{\circ}C$, 1150$^{\circ}C$ respectively, but on the contrary, DZ depth was decreased at low temperature 900$^{\circ}C$. As well, out-diffusion time below 2 hours was unsuitable for effective Gettering technique even though the temperature was high, and DZ formation could be achieved when initial oxygen concentration was only above 14 ppm in silicon wafer.