• 한국입자에어로졸학회지
• /
• 제8권4호
• /
• pp.125-132
• /
• 2012

Mercury oxidation in an SCR(selective catalytic reduction) catalyst was tested in this study with the conditions simulating the SCR system in full-scale coal-fired flue gas. A commercially available SCR catalyst was located in a temperature-controlled reactor system, and simulated gas was injected into the reactor. Mercury oxidation efficiency was determined from the difference between inlet and outlet elemental mercury concentrations. A control experiment was carried out with the gas composition of 12% $CO_{2}$, 5% $H_{2}O$, 5% $O_{2}$, 500 ppm $SO_{2}$, 400 ppm NO, 400 ppm $NH_{3}$, 5 ppm HCl, and 20 ${\mu}g/m^{3}$ Hg. Additional tests were conducted with different gas composition from the control condition to investigate the effect of gas composition on mercury oxidation in the SCR catalyst.

• 한국수소및신에너지학회논문집
• /
• 제15권3호
• /
• pp.244-249
• /
• 2004

Pd catalyst have been used in hydrogenation, oxidation, and low temperature combustion reaction. Recently, it has been candidated as a possible reagents in the partial oxidation of methanol reformers of the fuel cell. Pd catalysts, even though it is very precious and expensive, catalytic functioning is good, but it still need to be improved in the matter of durability and low catalytic activity after calcination. In this study, we synthesize the improved Pd catalyst and study their chemical functioning.

• 한국환경과학회지
• /
• 제17권12호
• /
• pp.1307-1314
• /
• 2008

Hydrogen gas is used as a fuel for the proton exchange membrane fuel cell (PEMFC). Trace amount of carbon monoxide present in the reformate $H_2$ gas can poison the anode of the PEMFC. Therefore, preferential oxidation (PROX) of CO is essential for reducing the concentration of CO from a hydrogen-rich reformate gas. In this study, conventional Pt/$Al_2O_3$ catalyst was prepared for the preferential oxidation of CO. The effects of catalyst preparation method, additive, and hydrogen on the performances of PROX reaction of CO were investigated. Water treatment and addition of Ce enhanced catalytic activity of the Pt/$Al_2O_3$ catalyst at low temperature below $100^{\circ}C$.

• 공업화학
• /
• 제31권4호
• /
• pp.368-376
• /
• 2020

본 연구에서는 SO₂를 제어하기 위한 산화 촉매에서 platinum (Pt)을 활성금속으로 하는 촉매의 반응특성에 관한 분석을 수행하였다. Titania (TiO₂) 지지체에 다양한 precursor 형태의 Pt를 사용하여 Pt/TiO₂ 촉매를 제조하여 실험에 사용하였다. Pt/TiO₂ 상의 Pt²⁺ 또는 Pt⁴⁺와 같은 Pt valence state에 따른 SO₂ 산화의 성능 차이는 나타나지 않으며, PtCl_x과 같은 Pt chloride species는 전체적으로 SO₂ 산화 성능을 감소시킨다. 또한, XPS 분석을 수행하여 SO₂ 산화 반응 전/후의 촉매상의 valence state를 분석한 결과 SO₂ 산화반응 이후 lattice oxygen의 감소 및 surface chemisorbed oxygen의 증가를 확인할 수 있다. 따라서 Pt/TiO₂ 촉매의 SO₂의 산화 반응은 PtOx에 해당하는 lattice oxygen의 반응과 oxygen vacancy에 의한 산화-환원 반응이 진행되는 Mar-Van Krevelen 메커니즘이 주요한 SO₂ 산화 반응임을 판단할 수 있으며, 이러한 결과를 통하여 촉매 상에 존재하는 PtOx (Pt²⁺ 또는 Pt⁴⁺)의 oxygen species가 주요한 활성 site로 작용함을 확인할 수 있다.

• Bulletin of the Korean Chemical Society
• /
• 제31권3호
• /
• pp.547-548
• /
• 2010

• Bulletin of the Korean Chemical Society
• /
• 제35권7호
• /
• pp.1931-1932
• /
• 2014

• 공업화학
• /
• 제32권6호
• /
• pp.627-631
• /
• 2021

휘발성유기화합물을 제거하기 위한 기존 촉매 시스템의 문제를 해결하고자 유도가열 촉매 시스템에 대한 연구를 수행하였다. 본 연구에서는 3종류의 Ni계 상용촉매를 적용하였으며, 촉매 부피, 조성, 열처리 분위기, 코일 내 위치를 포함한 유도가열 반응 특성을 조사하였다. 촉매의 조성 및 부피는 유도가열 시스템에 의한 발열 및 톨루엔 산화 성능에 영향을 미쳤다. 특히 철이 첨가된 촉매는 99% 이상의 Ni로 구성된 촉매에 비해 높은 발열을 나타내었으나 낮은 톨루엔 산화 성능을 나타내었다. 또한 Ni계 촉매의 열처리에 있어 공기 분위기는 촉매의 성능을 급격히 저하시킨다. 유도가열 시스템에서 촉매는 코일 내 중심에 위치하는 것이 최적 조건으로 나타났다. 연구를 통해 도출한 최적의 조건에서 촉매를 7회 반복 실험하였으며, 유사한 성능을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제32권10호
• /
• pp.3660-3665
• /
• 2011

CO-tolerant PtMo/C alloy electrocatalyst was prepared by a colloidal method, and its electrocatalytic activity toward CO oxidation was investigated. Electrochemical study revealed that the alloy catalyst significantly enhanced catalytic activity toward the electro-oxidation of CO compared to Pt/C counterpart. Cyclic voltammetry suggested that Mo plays an important role in promoting CO electro-oxidation by facilitating the formation of active oxygen species. The effect of Mo on the electronic structure of Pt was investigated using X-ray absorption spectroscopy to elucidate the synergetic effect of alloying. Our in-depth spectroscopic analysis revealed that CO is less strongly adsorbed on PtMo/C catalyst than on Pt/C catalyst due to the modulation of the electronic structure of Pt d-band. Our investigation shows that the enhanced CO electrooxidation in PtMo alloy electrocatalyst is originated from two factors; one comes from the facile formation of active oxygen species, and the other from the weak interaction between Pt and CO.

• 한국생산제조학회지
• /
• 제8권4호
• /
• pp.13-18
• /
• 1999

Recently among after-treatment devices which have high possibility of utility diesel oxidation catalyst(DOC) is concerned over the world. DOC oxidizes pollutants by means of activate-reaction during by-passing in the catalyst in doing so conversion efficiency of PM, CO and HC is high and this device does not have an effect on engine performance because back pressure is not nearly increased, But as a small amount of sulfur content in fuel is oxidized it makes sulfate which is absorbed on the surface of catalyst. So in this study the experiment is carried out by means of using ordinary fuel(0.1wt%) and low sulfur fuel(0.05wt%) with DOC and the emission gas of diesel engine is measured.

• 에너지공학
• /
• 제20권3호
• /
• pp.252-258
• /
• 2011

Nickel fiber mat was investigated as a potential structured catalyst for steam reforming of biogas in the temperature range of $600-700^{\circ}C$. The activity of as-received catalyst was very low owing to the smooth surface of fibers. Pretreatment of the catalyst by oxidation followed by reduction under methane partial oxidation condition significantly improved the catalytic activity, although degradation of the activity was found during the reaction due to oxidation and sintering. This deactivation was retarded by supplying additional hydrogen in the inlet gases or by coating $CeO_2$ over the catalyst surfaces.