• Journal of Environmental Impact Assessment
• /
• v.19 no.2
• /
• pp.153-168
• /
• 2010

The objectives of this study are to analyze flow characteristics for a side weir, which is an inlet structure for flow discharge reduction in the main channel through 3 dimensional numerical analysis and to understand the efficiency of the overflow effect at the side weir. In this study over 40 simulations using FLOW-3D, a computational fluid dynamics program were conducted, and the results were analyzed to find the influence of the flow hydraulics, geometry, channel and weir shapes on the coefficient. It is especially considered the relatively high stage in downstream that may cause flow within channel to be backed up along the channel. Additionally by setting up the scale of simulations much larger than the existing test equipment designed by other researchers, it is intended to analyze more accurate hydraulic behavior along with the realistic hydraulic features such as structures and volumes of flow. The results show that for design with subcritical flow only if the Froude number of upstream is sustained below 0.5 and the length of weir is 33-100% of the width of channel, it is expected to improve the efficiency of the overflow over a side weir.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.11a
• /
• pp.687-690
• /
• 2005

인터넷의 급속한 팽창으로 인해 가용 정보의 양이 폭발적으로 증가하고 있으나 이에 대응되는 효과적이고 효율적인 정보 검색 능력의 지원이 없다면 방대한 가용 정보들은 정보 사용자들에게 있어 이용 될 가치가 없으며 이는 곧 정보 범람(information overflow)으로 이어진다. 본 논문에서는 이에 대한 해결 방안으로써 한국어 표준 문형의 패턴을 기술하고 한국어 문장 구조(Korean Syntax Structure) 파악을 통한 메타 검색 시스템 설계를 제안한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.259-259
• /
• 2000

In the recent, the size of hardware is smaller and the structure is simpler, without reducing the performance of the digital controller. Accordingly, the fixed-point arithmetic is very important in the digital controller. This paper presents simulation to apply the robust control algorithms to DVDR servo controller using the floating-point and fixed-point arithmetic from the matlab. Also, it analyses and compares the performance of control algorithms in the each of point calculation and presents a method for improvement of drop in the performance, quantization error and overflow/underflow from using the fixed-point arithmetic

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.10a
• /
• pp.117-128
• /
• 2005

Korea is affected by typhoon 2-3 times a year, and 50${\sim}$60 % of annual rainfall is concentrated during summer with heavy daily precipitation. Recently such natural conditions cause many of failures or damages of reservoirs and embankments. Overflow by heavy flood is the main cause that results 54.2 % of total embankment failures with damages of spillway, outlet channel and stilling basin. Since damages by overflow are triggered by scour of soils nearby the structures, use of proper backfill materials with great resistance against erosion should be considered and application of suitable construction method to protect erosion may be adopted. Most failures of levee are caused by piping along the surface of cross-structure underneath levee. Such failures may be protected by deep consideration of piping at the stage of design and good quality control during construction. Sufficient magnitude of spillway and outlet channel is the ideal way to prevent failures by the flood. For existing structures, remodeling with reinforcement to protect against flood with review of required storage of dam should be considered.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.3
• /
• pp.280-288
• /
• 2019

A submerged breakwater is one of the coastal structures used to reduce wave energy and coastal erosion. However, a submerged breakwater has a negative aspect in that a strong rip current occurring around an open inlet due to a difference in mean water levels at the front and rear sides of the structure leads to scouring. Such scouring has a bad effect on its stability. In order to eliminate this kind of demerit, this study investigated an artificial reef of the overflow type with openings. We also developed a program where the flows around the artificial reef of the overflow type could be analyzed numerically. An unstructured grid system was used to cover the various geometries, and the level set method was applied to treat the movement of the free surface. To verify these numerical schemes, hydraulic physical tests were performed on the submerged breakwater and double breaking type artificial reef. Then, the wave height and velocity distribution around the reef were examined using the experimental results. Comparisons between the results of hydraulic and numerical tests showed reasonable agreement.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.54-61
• /
• 2004

This paper deals with flow characteristics on the air entrainment and the energy dissipation in nappe flow over the stepped drop structure. Nappe flow occurred at low flow rates and for relatively large step height Dominant flow features include an air pocket, a free-falling nappe impact and a subsequent hydraulic jump on the downstream step. Air entrainment occurred from the step edge, through a free-falling nappe impact and a hydraulic jump. Most energy was dissipated by nappe impact and in the downstream hydraulic jump. It was related with the step height and the overflow depth, but not related with step slope. The stepped drop structure was found to be effcient for water treatment and energy dissipation associated with substantial air entrainment.

• Water Engineering Research
• /
• v.1 no.4
• /
• pp.259-266
• /
• 2000

Scour hole is formed due to the high shear stress of the jet flow at the outlet of a hydraulic structure and vortex erosion occurs in the scour hole. It is important to determine the amount of vortex erosion occurs in the scour hole. It is important to determine the amount of vortex erosion for the design of bed protection. If the vortex erosion continues and reaches to the hydraulic structure, it causes the deformation of the structure itself. To obtain the amount of the vortex erosion, it is necessary to determine the shear velocity of the line vortex in the scour hole was derived by the theory of energy conservation and found to be related to the upstream overflow velocity. The amount of vortex erosion from the scour hole was obtained using entrainment equation for given value of shear velocity. For a design purpose, if the flow velocity at the end of an apron and the properties of bed material are given, the amount of vortex erosion was obtained.

• Journal of KIISE:Databases
• /
• v.33 no.5
• /
• pp.495-512
• /
• 2006

Recently, researches on a future position prediction of moving objects have been progressed as the importance of the future position retrieval increases. New index structures are required to efficiently retrieve the consecutive positions of moving objects. Existing index structures significantly degrade the search performance of the moving objects because the search operation makes the unnecessary extension of the node in the index structure. To solve this problem, we propose a space partition based index structure considering the mobility of moving objects. To deal with the overflow of a node, our index structure first merges it and the sibling node. If it is impossible to merge them, our method splits the overflow node in which moving properties of objects are considered. Our index structure is always partitioned into overlap free subregions when a node is split. Our split strategy chooses the split position by considering the parameters such as velocities, the escape time of the objects, and the update time of a node. In the internal node, the split position Is determined from preventing the cascading split of the child node. We perform various experiments to show that our index structure outperforms the existing index structures in terms of retrieval performance. Our experimental results show that our proposed index structure achieves about $17%{\sim}264%$ performance gains on current position retrieval and about $107%{\sim}19l%$ on future position retrieval over the existing methods.

• Journal of Astronomy and Space Sciences
• /
• v.30 no.2
• /
• pp.113-121
• /
• 2013

Heumgyeonggaknu is a water-hammering type automatic water clock which was made by Jang Yeong-Sil in 1438. The water clock that is located in Heumgyeonggaknu consists of Suho which is equipped with 2-stage overflow. Constant water wheel power is generated by supplying a fixed amount of water of Suho to Sususang, and this power is transferred to each floor at the same time. The 1st floor rotation wheel of Gasan consists of the operation structure which has the shape of umbrella ribs. The 2nd floor rotation wheel is made so that the 12 hour signal, Gyeong-Jeom signal, and Jujeon constitute a systematic configuration. The 3rd floor rotation wheel is made so that the signal and rotation of Ongnyeo and four gods can be accomplished. Based on the above conceptual design, this paper analyzed the internal signal generation and power transmission of Heumgyeonggaknu.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10d
• /
• pp.688-690
• /
• 2002

인터넷과 웹의 팽창과 함께 가용 정보의 양이 폭발적으로 증가하고 있으나 이에 대응되는 효과적이고 효율적인 정보 검색능력의 지원이 없다면 이와 같은 방대한 정보들은 정보 이용자들에 있어 이용 가치가 없으며 이는 곧 정보 범람(information overflow)을 의미한다. 본 논문에서는 이에 대한 해결 방안으로써 사용자의 편이성과 정보검색 능력을 극대화할 수 있는 자연어 질의 문맥 구조 기반 개인형 메타 정보검색 엔진을 제안하고자 한다.본 방법론은 자연어 질의를 기본 입력 형태로 하여 자연어 질의의 문맥 구조(context structure) 및 기타 정보 평가 요소들을 이용하는 다척도(multi-criteria)의사 결정 기법 및 개인형 메타 정보 평가(information rating) 방법론으로 구성되어 있으며 이를 위한 시스템 설계를 제안한다.