• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.3
• /
• pp.210-220
• /
• 2001

This paper aims at the evaluation on the characterization of CFRP laminate plates using falling weight impact tester. The experimentation was conducted on several laminates of different fiber and ply orientation. A system was built for the impact strength of CFRP laminates in consideration of stress wave propagation with using drop-weight impact tester as one of impact test. Absorbed energy of orthotropic composites with using T300 fiber, which are composed of the same fiber and stacking number is higher than that or quasi-isotropic specimen over impact energy 7J, but in case or using T700 fiber, much difference does not show. Also, absorbed energy of orthotropic composites with using T300 fiber, which are composed or stacking number and orientation became more than that of T700 fiber specimen; however great change doesn't show in case of quasi-isotropic specimens. It is found that influence was confirmed between impact energy and absorbed energy as the impact energy is increased with adding the falling weight.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.7 no.1
• /
• pp.69-73
• /
• 2003

Specific leaf weight (SLW), defined as the mass of tissue per unit leaf area has been found to be an important physiological parameter as it indicates the relative thickness of leaves. Greater SLW provides more photosynthetic potential per unit area of leaf and hence it is frequently been considered as correlated with photosynthesis in several plant species. Collections of 165 mulberry (Morus sp.) germplasm accessions, both Indian and exotic in origin were evaluated for their variability with respect to SLW. The mean specific leaf weight ranged from 35.3 to $72.3 g/m^{-2}$. The distribution of SLW was found to be normal. High heritability (97.08%) and a small difference between genotypic and phenotypic variance demonstrates the genetic control over SLW. Significant heterotic effect with respect to SLW was observed in crosses when parents with high and low SLW were chosen.

• Textile Coloration and Finishing
• /
• v.18 no.6 s.91
• /
• pp.25-30
• /
• 2006

Degumming is an essential process to improve the luster and smoothness of the silk filament. Silk varieties were degummed using different methods. A number of methods, from pad-steam to specific alkaline are being used for this propose. In this paper an attempt to compare the efficiencies of different degumming processes has been made. from the results, it may be observed that when silk fabrics were pad-steam, the degree of degumming, as assessed by weight loss. When the pad-steam degumming was carried out at different pHs, adjusted using alkalies, it was observed that at higher pH the weight loss is high. Pad-steam degumming as well as star degumming was found to be superior with minimum damage to the substrate. Among the alkalis used, the sodium carbonate gives the best results, since the weight loss is almost maximum with lower strength loss by over degumming. It is also efficient from the point of view of conservation of heat energy and time as against the comparable star degumming.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.10
• /
• pp.35-40
• /
• 2017

A weight-rate disposal system for food waste has been implemented in all over the country. The food waste disposal system is a system paying service charge according to the volume of food waste, which means the more we produce waste, the more we have to pay as much.Since this policy was introduced, each of apartment, villa, etc and other buildings must install the food waste disposal system. We can say that there are strong points in this paper for us to install a weight monitor on the channel of the floor each, accumulate the fares automatically and collect the fares at the end of every month.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2001.05a
• /
• pp.152-157
• /
• 2001

This paper was studied on the characteristics of crevice corrosion prevention of SS 400 in marine environment. In NaCl solution, polarization behavior under the crevice corrosion was investigated. And Weight loss rate of SS 400 applied cathodic protection and non cathodic protection was measured according to the NaCl concentration. The main results obtained are as follows : The weight loss rate of Al-alloy galvanic anode was increased as the concentration of NaCl solution increased by 3.5% but the concentration increased over 3.5%, that of Al-alloy galvanic anode become decreased. The protective potential of SS 400 used Al-alloy galvanic anode becomes more cathodic polarization with increasing concentration of NaCl solution. Effects of oxygen on the weight loss rate of Al-alloy sacrificial anode for cathodic protection as the concentration of 3.5% NaCl solution become sensitive than that of 0% NaCl solution.

• Journal of Information Processing Systems
• /
• v.17 no.6
• /
• pp.1083-1096
• /
• 2021

Compressed sensing-based matching pursuit algorithms can estimate the sparse channel of massive multiple input multiple-output systems with short pilot sequences. Although they have the advantages of low computational complexity and low pilot overhead, their accuracy remains insufficient. Simply multiplying the weight value and the estimated channel obtained in different iterations can only improve the accuracy of channel estimation under conditions of low signal-to-noise ratio (SNR), whereas it degrades accuracy under conditions of high SNR. To address this issue, an improved weighted matching pursuit algorithm is proposed, which obtains a suitable weight value u_op by training the channel data. The step of the weight value increasing with successive iterations is calculated according to the sparsity of the channel and u_op. Adjusting the weight value adaptively over the iterations can further improve the accuracy of estimation. The results of simulations conducted to evaluate the proposed algorithm show that it exhibits improved performance in terms of accuracy compared to previous methods under conditions of both high and low SNR.

• Journal of the Korean Mathematical Society
• /
• v.44 no.5
• /
• pp.1139-1162
• /
• 2007

We examine the main linear coding theory problem and study the structure of optimal linear codes over the ring ${\mathbb{Z}}_m$. We derive bounds on the maximum Hamming weight of these codes. We give bounds on the best linear codes over ${\mathbb{Z}}_8$ and ${\mathbb{Z}}_9$ of lengths up to 6. We determine the minimum distances of optimal linear codes over ${\mathbb{Z}}_4$ for lengths up to 7. Some examples of optimal codes are given.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.286-290
• /
• 2004

This paper deals with tipping over of hydraulic excavator's crane work. If the excavator lifts too heavy weight, the excavator will be tipped up. This is account for 38% of whole excavator accidents. In this paper, tipping-over load which is maximum load of excavator can lift with displacement of excavator links, real load and tipping-over rate are computed with Zero Moment Point theory. ZMP is verified with simulation and experiment.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1081-1086
• /
• 2008

During the manufacturing process of a propeller for a large scale commercial ships, several times of turn-over process should be required. Propeller turn-over is a indispensible process but not easy because of its heavy weight and complicate shape. Recently, we developed a new type of turn-over system for a large scale propeller. The system consists of turning roller devices, sliding transfer system, clamping devices and so on. In this paper, we described the design process which includes mechanical structure design, dynamic analysis and assembly with a laser tracker.

• Journal of Nutrition and Health
• /
• v.35 no.7
• /
• pp.743-753
• /
• 2002

The purpose of this study was to investigate the relationship among nutritional status, serum lipids and leptin of 134 elementary school students with different obesity index residing in Kyunggi-do, Korea. Subjects were assigned to under weight, normal weight or over weight group according to the their obesity index. Their nutritional status, serum lipid and leptin levels were evaluated based on 24-hr dietary recalls, anthropometric measurements and blood analysis. The mean weight, height and obesity index of total subjects was 150.8cm, 45.6kg and 5.4%. The mean % of body fat was higher while LBM and TBW (total body water) were lower in over weight subjects than those of other two groups. Total food, plant protein, carbohydrate, and vitamin C intakes of underweight male students were lower than those of overweight male students. The consumption of total fat was the highest in the female normal weight subjects and the lowest in female overweight subjects. Male students consumed more plant protein and vitamin C than female students. The mean daily intake of vitamin B$_2$, calcium and zinc of all subjects did not meet the Korean RDA. Also, iron intake of female students was lower than the Korean RDA. The mean level of serum leptin was the highest in male and female overweight subjects (p＜0.001). The HDL-cholesterol level was the highest in the underweight group of male subjects (p＜0.05) and in the normal weight group of female subjects (p＜0.001) The serum level of leptin and atherogenic index (AI) of females were higher than those of males. Serum leptin of total subjects had significantly positive correlation with obesity index, weight, SBP, body fat, cholesterol intake, serum triglyceride, and AI. However, serum leptin was negatively correlated with LBM, TBW, intake of plant protein, vitamin B$_1$, vitamin C and serum HDL-cholesterol. Obesity index was also positively correlated with weight, SBP, body fat, serum triglyceride and AI. To summarize the results, the vitamin B$_2$, calcium, zinc, iron and fiber intakes should be supplied to elementary school students, especially those who were overweight. The average serum leptin level of students showed remarkably positive correlation with obesity index, body fat, serum lipids and AI. Also, it was suggested that the serum leptin might be related to the dietary factors like cholesterol, plant protein, vitamin B$_1$ and vitamin C of elementary school students.