• Journal of the Korean Society of Safety
• /
• v.21 no.3 s.75
• /
• pp.73-80
• /
• 2006

Generally beam design depends on the yielding and maximum strength of each member varying with its section shape. Web plate of H-shape beam has not been substituted with glass plate, because it is known that its strength and heat properties are different and it is limited to substitute the existing steel web with glass element. Ceiling height of each room should be decreased with more than 60-80cm due to the beam. Differently from this condition, glass web beam has a good point to see through it and sunshine can be penetrate into the other size especially when it is installed as of outside wall. And also, it can be safer due to controlling room inside easier, if the strength is applicate. This study is to show some applicability after finding out the properties using the test. The test members with a size of $1,600{\times}200{\times}300{\times}9mm$ being SS41 rolled steel having THK 9mm flange while having 8,10mm and reinforced glass 12mm thickness is bonded with epoxy bond under the condition of temperature $28^{\circ}C$, humidity 50%, bonding power 24Mpa. It is show reinforced glass has 5 times of fracture stress more than the common glass but $50{\sim}150%$ difference between these 2 kinds of glass was shown. Reinforce glass did not support the original upper flange after fracture but the common glass did the upper flange after unloading. Generally reinforced glass is stronger than the common one but the common glass having a part of crack on it, compared with reinforced glass having the overall fracture could be more useful in case of needing ductility.

• Korean Institute of Interior Design Journal
• /
• v.24 no.1
• /
• pp.34-42
• /
• 2015

This research is about shared living facilities for the solitary elderly in Gyeonggi province (so called "Carnation House"), which was opened after 2013. These facilities aim to help solving the social problems of the growing number of the solitary elderly. The research was conducted from April 2014 to October 2014 by using observation, measurement, photography, and interview methods. This research reviewed floor plan, area, accessibility, visual openness, and furniture and equipments. The results are as follows: First, considering the need for rest area and the protection of privacy, livingroom should at least be equipped with a variable wall or have a separate room. Secondly, for the kitchen plan, considering the fact that large number of people move simultaneously, kitchen entrance should be widened or LDK type is preferable. Thirdly, the bathroom entrance should be widened to at least 800mm and should have barrier free design. Fourthly, porch entrance should be planned to secure enough space and shoe cabinets for multiple users. Fifthly, to allow the users to enjoy outside view, the windows of living spaces should be placed no higher than 800mm from the floor level. Finally, for the location of the facility, people prefer the location be at the center of the village or near home. In addition, location with easy accessibility for the elderly is advisable. Therefore, establishing local guidelines for shared living facilities for the solitary elderly is advisable. When establishing local guidelines, local characters, culture and usage patterns should be considered.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.6
• /
• pp.750-756
• /
• 1985

Experimental investigation was carried out to study the natural convection of water and silicon oil due to end temperature differences in a horizontally insulated rectangular enclosure of aspect ratio 0.1 with a special attention on the core configuration in the laminar boundary-layer flow regime. Rayleigh number ranges covered herein are Ra=4.40 * 10$^{6}$ -9.64 * 10$^{7}$ for water and Ra=1.69*10$^{5}$ -3.80*10$^{6}$ for silicon oil, respectively. In the case of water, for Ra.geq.2.21 * 10$^{7}$ there appeared distinct horizontal thermal layers adjacent to the horizontal boundaries in the core and the temperature distribution outside the horizontal thermal layers, i.e., in the mid-core region, is vertically stratified. The core flow pattern was shown to be nonparallel with a weak back flow in the mid-core for Ra.geq.3.63 *10$^{7}$ . In the case of silicon oil, distinct horizontal thermal layers appeared along the core horizontal boundaries for Ra.geq.1.27 * 10$^{6}$ with a stratified temperature distribution in the mid-core, but the core flow pattern in this case was shown to be parallel. In addition, secondary flow appeared near the hot wall for Ra.geq.3.80 * 10$^{6}$ . Nusselt number, Nu, was found to be proportional to R $a^{0.3}$ for water and R $a^{0.28}$ for silicon oil in the boundary-layer flow regime. There also in an indication from the comparison with other results that Nu is independent of aspect ratio for water in the boundary-layer flow regime in low aspect ratio enclosures.res.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.52 no.2
• /
• pp.67-73
• /
• 2010

Unlike Urban building, horticultural facilities has a lot of heat loss through plastic or glass covering material which could be much influential to growing plant and consuming energy for heating greenhouse. In many cases, heat loss from a break of cover, a gap of joint sealing, the entrance to greenhouse and windows for ventilation are the main factors considered in calculating the heating load for horticultural facilities. however the normal observation through human eye and digital camera could not recognize where the heat loss occurred. but the infrared thermal image camera with detecting thermal difference could be very effective for noticing heat loss by analyzing infrared thermal image. In this study, greenhouse structure, covering material, internal and external provisions for Horticultural facilities were surveyed in different sites and Infrared thermal camera shooting and image analysis were performed for auditing heat loss from cultivation facilities The results from this study were that unexpected heat loss had been noticed in 7 representative cases of greenhouse such as side wall covered with single or double plastic, and the joint of horizontal thermal curtain, roof without horizontal thermal curtain, entrance to greenhouse, windows for ventilation. the most important factors for keeping heat energy were whether the horizontal thermal curtain with multifold thermal material was installed or not. The internal or external covering using multifold thermal curtain proved to be the most effective ways to keep heat energy from losing through heat transmission, heat radiation. from inside to outside the horticultural facilities.

• KIEAE Journal
• /
• v.16 no.1
• /
• pp.57-65
• /
• 2016

Purpose: The purpose of this study is to analyze the energy performance by applying new technologies for passive and active control. Method: We selected new technologies for passive and active control which are based on formal study by analyzing technology applied to the High-Performance Buildings in various countries. Also, we analyzed energy saving potential for each technologies by breakdown the result of the energy saving rates in detail. Result: For the wall and roof insulating methods, preceding studies showed that up to 21% energy could be saved by improving roof insulation and applying proper outside insulation compared to non-insulation. For the windows and glazing system, preceding studies showed that Low-E glazing system could save up to 11% energy compared to single glazing system. Studies about solar and daylighting controls revealed that effective daylighting dimming control could save 13% of energy compared to uncontrolled situation. Studies on DOAS (Dedicated Outdoor Air System) showed that about 23% energy could be saved compared to standard VAV system. Studies on the active chilled beam showed that about 25% energy could be saved compared to standard VAV system and studies of applying UFAD (Under Floor Air Distribution) could consume 31% less energy than applying overhead system.

• Journal of Korean Society of Rural Planning
• /
• v.20 no.3
• /
• pp.155-163
• /
• 2014

This study aimed to identify orientations for the development of the community by establishing desirable aesthetical environments and reorganizing the residents' communal way of life through the implementation of village art projects. To investigate how the implementation of village art projects influence community and communication, the author analyzed changes in walls made by the implementation of actual projects in Anhyeon Village in Gochang, Dongpirang in Tongyeong, and Byeolbyeol Village in Yeongcheon. The community was analyzed from the view points of locality, communal ties, and communication. The results showed that Anhyeon Village in Gochang expressed its locality with chrysanthemum, poems and local figures. Similar walls were built across the village to strengthen ties among the residents, and portraits used as doorplates represented communication among them. Various paintings of seas, flowers, and poems were seen in Dongpirang in Tongyeong, which were thought to be representations of its locality and the friendliness of hometown in the less favoured area. Wall paintings played pivotal roles in this village to impart to the residents essentials that should be kept to eliminate inner walls in their minds and ensure open communications. In Byeolbyeol Village in Yeongcheon, locality was presented with common farm village landscapes in various materials, patterns and formativeness. Village-wide reinforcement contributed to strengthening ties in the community rather than forming boundaries against outside worlds. Cultural and artistic elements structured mental walls that made people not aware of the presence of physical walls.

• Korea journal of population studies
• /
• v.24 no.1
• /
• pp.41-65
• /
• 2001

This study aims a comparative analysis of social stratification in the Great Seoul area using two types of population. One type of population is a resident population(常住人口), and the other is a daytime population주간인구(晝間人口). In most demographic studies, only resident population have been considered. There has been less attention to daytime population. However, a resident population have a character of night population야간인구(夜間人口). In fact, most people move and work in the areas where they do not live in everyday life in the contemporary period, which indicates that the concept of a daytime population is more significant than that of a resident population. This study reveals that a number of people, on the one hand. come together to the downtown area to work or study while they live in other areas. On the other hand, resident population in downtown area do not move so much. When we analyze the social stratification structure of the Great Seoul area using a resident population, we find that the resident population of downtown area consist of those of low social status. On the contrary, the daytime population of downtown area in Seoul consist of those of high social status. This means that most people of high social status live in the southern area of Seoul or outside Seoul, but make a living in downtown area in everyday life. From this study, we find that the concept of a daytime population is as important as that of a resident population. The more residence becomes separate from work place, the more the significance of the concept of a daytime population grows in making policy as wall as in demographic studies. This study implies that we need to pay more attention to the concept of daytime population in demographic and sociological Studies.

• Journal of the Korean housing association
• /
• v.25 no.1
• /
• pp.81-90
• /
• 2014

As an emerging market in central Asia, Kazakhstan's housing market is witnessing increasing demands. Though Korean construction industries have attempted to take advantage of this opportunity, inadequate understanding of the local living demands have kept the industries from successfully establishing themselves in the foreign context. The goal of this research is to derive architectural planning implications regarding the living demands by investigating changes being made to the housing structure. By analyzing 11 apartment unit plans, it was found that Kazakhs had a living demand for more spacious living rooms and functional spaces. In the effort to improve the livingroom environment and usability such as enlarging the livingroom, removing the living room wall for open space or expanding the inner space facing outside is understood that the living room is considered as an important space. The fact that spaces such as dress rooms and utility rooms are being added in the housing market, reflects the demand of functional spaces. These demands are considered as the reflection of the traditional life style of nomad culture and the cold local climate. Therefore, it can be said that the apartment unit plans distributed in the Korean housing market are quite compatible with the Kazakh housing market since they offer spatious living rooms, while the latter founding implies the changes that ought to be made for a successful establishment in the foreign market.

• Journal of the Korean housing association
• /
• v.20 no.3
• /
• pp.11-18
• /
• 2009

The purpose of this study is to propose a method of developing an improved Hanok. To achieve this, an investigation was carried out on the factors of the main floor plan in the improved Hanok development and an interview was conducted with residents who live in the improved Hanok development. The conclusions obtained through this study are as follows: First, The shape of 一 was marked at the highest in the Korean traditional plan types such as 一, ㄱ and 田. It is considered that this reduces the cost of construction by simplifying the structure of the roof. Second, the size was consisted of $5{\times}3$ Kan, the Korean traditional module that determines the number of columns and expresses the position of the inner wall. However, the Kan measure ments for the bathroom and multi-purpose room differed. Third, 57.6% of the 2 bedroom units were investigated. However, 60% of the residents preferred 3 bedroom units. Fourth, the results of the relationship between the living room and the kitchen showed that the residents preferred L+DK type to LDK type by 54.2% and 45.8% respectively. Fifth, the residents preferred a bathroom constructed next to the bedroom because they considered that the improved Hanok development would be used as an Inn during holiday periods. Moreover, they desired a plan where the bathroom could be directly entered from the outside. Sixth, the design for the improved Hanok development should have a suitable multipurpose-room because 72.5% of the residents have extended their house to accommodate such a room. Seventh, 61% of the improved Hanok units had an entrance space, which does not exist in Korean traditional houses. For this reason, the Korean traditional floor (: the Maru) was avoided due to its inconvenience.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.397-400
• /
• 2006

In this study, we experimentally investigate the possibility of skin-friction drag reduction by series of transverse cavities in a turbulent boundary layer flow. The effects of cavity depth (d), cavity length (l) and cavity spacing (s) on the skin friction drag are examined in the range of $Re_{\theta}\;=\;4030\;{\sim}\;7360$, $d/{\theta}_0\;=\;0.13\;{\sim}1.03$, l/d = 1 ~ 4 and s/d = 5 ~ 20. We perform experiments for twenty different cavity geometries and directly measure total drag force using in-house force measurement system. In most cases, the skin friction drag is increased. At several cases, however, small drag reduction is obtained. The variation of the skin ftiction drag is more sensitive to the cavity length than to the cavity depth or cavity spacing, and drag is reduced at $s/l\;{\geq}\;10$ and $l/{\theta}_0\;{\leq}\;0.26$ irrespective of the cavity depth. At $l/\bar{\theta}_0\;=\;0.13$ and s/l = 10, maximum 2% drag reduction is achieved. When the skin friction drag is reduced, there is little interaction between the flows inside and outside cavity, and the flow changed by the cavity is rapidly recovered at the following crest. A stable vortex is formed inside a cavity in the case of drag reduction. This vortex generates negative skin friction drag at the cavity bottom wall. Although there is form drag due to the cavity itself, total drag is reduced due to the negative skin friction drag.