• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6B
• /
• pp.579-587
• /
• 2010

The mid-range streamflow forecast was performed using NWP(Numerical Weather Prediction) provided by KMA. The NWP consists of RDAPS for 48-hour forecast and GDAPS for 240-hour forecast. To enhance the accuracy of the NWP, QPM to downscale the original NWP and Quantile Mapping to adjust the systematic biases were applied to the original NWP output. The applicability of the suggested streamflow prediction system which was verified in Geum River basin. In the system, the streamflow simulation was computed through the long-term continuous SSARR model with the rainfall prediction input transform to the format required by SSARR. The RQPM of the 2-day rainfall prediction results for the period of Jan. 1~Jun. 20, 2006, showed reasonable predictability that the total RQPM precipitation amounts to 89.7% of the observed precipitation. The streamflow forecast associated with 2-day RQPM followed the observed hydrograph pattern with high accuracy even though there occurred missing forecast and false alarm in some rainfall events. However, predictability decrease in downstream station, e.g. Gyuam was found because of the difficulties in parameter calibration of rainfall-runoff model for controlled streamflow and reliability deduction of rating curve at gauge station with large cross section area. The 10-day precipitation prediction using GQPM shows significantly underestimation for the peak and total amounts, which affects streamflow prediction clearly. The improvement of GDAPS forecast using post-processing seems to have limitation and there needs efforts of stabilization or reform for the original NWP.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.4
• /
• pp.437-447
• /
• 2011

In this study, the lower limbs joints were analyzed for features based on the biomechanical characteristics of landing techniques according to height and landing on the ground type (flats and downhill). In order to achieve the objectives of the study, changes were analyzed in detail contents such as the height and form of the first landing on the ground at different angles of joints, torso and legs, torso and legs of the difference in the range of angular motion of the joint, the maximum angular difference between joints, the lower limbs joints difference between the maximum moment and the difference between COM changes. The subjects in this study do not last six months did not experience joint injuries 10 males in 20 aged were tested. Experimental tools to analyze were the recording and video equipment. Samsung's SCH-650A model camera was used six units, and the 2 GRF-based AMTI were used BP400800 model. 6-unit-camera synchronized with LED (photo cell) and Line Lock system were used. the output from the camera and the ground reaction force based on the data to synchronize A/D Syc. box was used. To calculate the coordinates of three-dimensional space, $1m{\times}3m{\times}2m$ (X, Y, Z axis) to the size of the control points attached to the framework of 36 markers were used, and 29 where the body was taken by attaching a marker to the surface. Two kinds of land condition, 40cm and 60cm in height, and ground conditions in the form of two kinds of flat and downhill slopes ($10^{\circ}$) of the landing operation was performed and each subject's 3 mean two-way RM ANOVA in SPSS 18.0 was used and this time, all the significant level was set at a=.05. Consequently, analyzing the landing technique as land form and land on the ground, the changes of external environmental factors, and the lower limbs joints' function in the evaluation were significantly different from the slopes. Landing of the slop plane were more load on the joints than landing of plane. Especially, knee extensor moment compared to the two kinds of landing, slopes plane were approximately two times higher than flat plane, and it was statistical significance. Most of all not so much range of motion and angular velocity of the shock to reduce stress was important. In the further research, front landing as well as various direction of motion of kinetic, kinetic factors and EMG variables on lower limbs joints of the study in terms of injury-prevention-approach is going to be needed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.10
• /
• pp.1061-1070
• /
• 2009

In this paper, we have designed TDL(True-time Delay Line) for eliminating beam-squint occurring in active phased array antenna with large electrical size operated in wide bandwidth, and have tested its electrical performance. The proposed TDL device is composed of 4-bit microstrip delay line structure and MMIC amplifier for compensation of the delay-line loss. The measured results of gain and phase versus delay state satisfy the electrical requirements, also P1dB output power and noise figure meet the requirement. To verify the performance of fabricated TDL, we have simulated the beam patterns of wide-band active phased array antenna using the measured results and have certified the beam pattern compensation performance. As a result of simulated beam pattern compensation with respect to the 675.8 mm size antenna which is operated in X-band, 800 MHz bandwidth, we have reduced the beam squint error of ${\pm}1^{\circ}$ with ${\pm}0.1^{\circ}$. So this TDL module is able to be applied to active phase array antenna system.

• Journal of Korean Academy of Nursing Administration
• /
• v.5 no.1
• /
• pp.87-97
• /
• 1999

Rapidly changing healthcare environment and professional nursing practice need a strategy for the organizational development and goal attainment. An understanding of organizational culture could help managers enhance or expend their management strategy, thus increasing the probability of their success in the organization. On the other hand. organizational culture is an abstract concept and can show several views between sciences applying it. Therefore. organizational culture can be described to different ways with roots in each other discipline. Thus. it is necessary to define the concept of organizational culture in nursing perspective. This article reports a study conducted to analyze the concept of Nursing Service Organizational Culture. This study is performed by the guideline of Walker and Avant for concept analysis : selecting a concept. detering aim of analysis, identifying all use of concept. defining attributes. constructing model. contrary, borderline. related cases. identifying antecedents and consequences. According to the results of this study. the following definition attributes of Nursing Service Organizational Culture was suggested. We could define that nursing service organizational culture is the pattern of basic assumption and common belief that shared by the subordinates of nursing service. So, it provides a shared identity for all employees. Attributes of Nursing Service Organizational Culture were defined as (1) it is performed by the result of the interaction through formal. informal communication among nursing service organizational subordinations. (2) it has been performed unconsciously and reacts without ever thinking about the behavior. (3) it makes a unique pattern of behaviors to each nursing organization. which is different from other groups. (4) it has a broad and subtle forces to its subordinates. (5) it provides subordinates with the way of thought and behavior. (6) it influences on the output. stability. and de velopment of nursing service.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.12
• /
• pp.768-775
• /
• 2017

Energy harvesting characteristics of trapezoidal piezoelectric cantilever generator, which has a lead zirconate titanate (PZT) laminate film, were compared by longitudinal (3-3) and transverse (3-1) modes. The PZT laminate film, fabricated by a conventional tape casting process, was cofired with Ag electrode at $850^{\circ}C$ for 2 h. A multi-layered Ag electrode by a planar pattern and an interdigitated pattern was applied to the PZT laminate to implement the 3-3 and 3-1 modes, respectively. The energy harvesting performance of the 3-3 mode trapezoidal piezoelectric cantilever generator was better than that of the 3-1 mode. An extremely high output power density of $26.7mW/cm^3$ for the 3-3 mode was obtained at a resonant frequency of 145 Hz under a load resistance of $50{\Omega}$ and acceleration of 1.3 G, which is ~3-times higher than that for the 3-1 mode. Therefore, the 3-3 mode is considered significantly efficient for application to high-performance piezoelectric cantilever generator.

• Korean Journal of Optics and Photonics
• /
• v.15 no.4
• /
• pp.299-308
• /
• 2004

We proposed more efficient encoding methods that can design a multi-channel multi-level phase only computer-generated hologram(CGH) that can reconstruct many objects simultaneously without a conjugate image. We used a fabrication technique for the pixel oriented CGH for designing the pattern of the proposed multi-channel CGH. We investigated the difference of the optical efficiency(η), mean square error(MSE) and signal-to-noise ratio(SNR) of multi-channel CGHs that were designed by three kinds of encoding methods according to the number of quantization phase levels, and we estimated the performance of the pattern of the proposed multi-channel CGH. Generally, as the number of input objects' reference patterns stored in the CGH is increased, the reconstruction quality of the CGH is degraded. But we observed through computer simulation that the diffraction efficiency of the 1-ch CGH is 70%, and those of the 2-ch, 4-ch, 8-ch CGHs are 62%, 62% and 63%. Therefore we found that the diffraction efficiencies of the multi-channel CGHs using the newly proposed encoding method are similar to that of 1-ch CGH. We implemented the CGH optically using a liquid crystal spatial light phase modulator that consisted of a PAL-SLM efficiently coupled with a XGA type LCD by an optical lens and an LD for illuminating the LCD. We discussed the output images that are reconstructed from the PAL-SLM.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.10
• /
• pp.2461-2469
• /
• 1997

Target detection and recognition problems, in which neural networks are widely used, require translation invariant and real-time processing in addition to the requirements that general pattern recognition problems need. This paper presents a novel architecture that meets the requirements and explains effective methodology to train the network. The proposed neural network is an architectural extension of the shared-weight neural network that is composed of the feature extraction stage followed by the pattern recognition stage. Its feature extraction stage performs correlational operation on the input with a weight kernel, and the entire neural network can be considered a nonlinear correlation filter. Therefore, the output of the proposed neural network is correlational plane with peak values at the location of the target. The architecture of this neural network is suitable for implementing with parallel or distributed computers, and this fact allows the application to the problems which require realtime processing. Net training methodology to overcome the problem caused by unbalance of the number of targets and non-targets is also introduced. To verify the performance, the proposed network is applied to detection and recognition problem of a specific automobile driving around in a parking lot. The results show no false alarms and fast processing enough to track a target that moves as fast as about 190 km per hour.

• Journal of Broadcast Engineering
• /
• v.19 no.5
• /
• pp.726-735
• /
• 2014

In accordance with 4K UHD(Ultra High Definition) LCD television's higher resolution and data expansion, LCD TV had to face problems such as increasing numbers of cables and tangible skews problems among cables. The V-by-One HS is a new interface technology in the path between the image processing IC and timing control (TCON) board. The variable speed from 600 Mbps to 3.75 Gbps effectively meets the requirements of various different pixel rates. In this paper, we use the V-by-One HS interface to illustrate our proposed simulation method of frequency resonance mode and PCB design approach to model the effects of signal integrity for high speed video signal using an IBIS models.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.9
• /
• pp.1905-1912
• /
• 2009

Clustering results based on the FCM algorithm sometimes produces undesirable clustering result through data distribution in the clustered space because data is classified by comparison with membership degree which is calculated by the Euclidean distance between input vectors and clusters. Symmetrical measurement of clusters and fuzzy theory are applied to the classification to tackle this problem. The enhanced FCM algorithm has a low impact with the variation of changing distance about each cluster, middle of cluster and cluster formation. Improved hybrid network of applying FCM algorithm is proposed to classify patterns effectively. The proposed enhanced FCM algorithm is applied to the learning structure between input and middle layers, and normalized delta learning rule is applied in learning stage between middle and output layers in the hybrid network. The proposed algorithms compared with FCM-based RBF network using Max_Min neural network, FMC-based RBF network and HCM-based RBF network to evaluate learning and recognition performances in the two-dimensional coordinated data.

• Aerospace Engineering and Technology
• /
• v.13 no.1
• /
• pp.55-62
• /
• 2014

FTSR(Flight Termination System Receiver) is a device that receives a ground command signal to abort a flight mission when abnormal conditions occur in the space launch vehicle. The secure tone command message shall consist of a series of 11 character tone pattern. Each character consists of the sum of two tones which taken from a set of 7 tones defined by IRIG(Inter-Range Instrumentation Group) in the audio frequency range. The MHA(Modified High alphabet) command adds a security feature to the secure tone command by using the predefined difference code. In order to check the function and performance of MHA FTSR, which is under development, for KSLV-II, the testbed should have functions of RF signal generation, receiver's output port monitoring, RS-422 communication and test data management. In this paper, we first briefly introduce MHA command and FTSR interface, and then show the LavVIEW based testbed include its H/W configuration, S/W implementation and test results.