• 한국전기전자재료학회논문지
• /
• 제29권3호
• /
• pp.131-134
• /
• 2016

This research was analyzed thermal characteristics that was appointed disadvantage when smart LED driver ICs was packaged and we applied extracted thermal characteristics for optimal layout design. We confirmed reliability of smart LED driver ICs package without additional heat sink. If the package is not heat sink, we are possible to minimize package. For extracting thermal loss due to overshoot current, we increased driver current by two and three times. As a result of experiment, we obtained 22 mW and 49.5 mW thermal loss. And we obtained optimal data of 350 mA driver current. It is important to distance between power MOSFET and driver ICs. If thhe distance was increased, the temperature of package was decreased. And so we obtained optimal data of 3.7 mm distance between power MOSFET and driver ICs. Finally, we fabricated real package and we analyzed the electrical characteristics. We obtained constant 35 V output voltage and 80% efficiency.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.53-56
• /
• 2001

With the ever increasing clock frequency and integration level of CMOS circuits, I/O(input/output) and interconnect issues are becoming a growing concern. In this thesis, we propose the 2.5Gbps high speed input driver This driver consists of four different blocks, which are the high speed serializer , PECL(pseudo emitter coupled logic) Line Driver, PLL(phase lock loop) and pre-emphasis signal generator. The proposed pre-emphasis block will compensate the high frequency components of the 2.5Gbps data signal. Using the pre-emphasis block, we can obtain 2.5Gbps data signal with differential peak to peak voltage about 900 m $V_{p.p}$ This driver structure is on fabrication in 2.5v/10.25um 1poly, 5metal CMOS process.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.561-566
• /
• 2000

A screw driver is essentially used in assembling machine parts and electronic products such as the printed circuit board with a housing. As the parts to be assembled becomes small and precise, the higher precision of the controling screw driver torque is required. However, because the operator controls the fastening torque by his experience, it must be inexact. Thus the screw driver which can exactly control the fastening torque by a bellows is designed and developed in the study. The bellows is expanded by the inner air pressure and contracted and by the spring operation. The bellows driver is composed of the entrance solenoid valve, the exit solenoid valve and the pressure sensor. The pressure sensor senses the bellows pressure. When the pressure sensor output reaches the setting value, it operates the exit solenoid valve not to deliver further torque by letting the air of the bellows out. Through a series of experiments, the performance is studied and verified.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2004년도 춘계학술발표대회
• /
• pp.797-800
• /
• 2004

FED(Field Emission Display)는 CRT(Cathode Ray Tube)의 화질과 LCD(Liquid Crystal Display)와 같은 FPD(Flat Panel Display)의 경량, 박형의 장점을 만족시키는 차세대 Display 소자로서 주목을 받고 있다. 본 논문은 저항열을 이용하여 256 Gray-Scale Level을 출력하는 8 비트 FED Data Driver IC 설계에 관한 것이다. 즉, 저항열과 D/A 변환기를 통하여 디지털 입력 데이터에 따른 아날로그 출력 데이터를 갖는 FED 용 Data Driver IC이다. 본 논문에서 설계된 Driver IC는 집적도를 높여 Output Channel 수를 증가시키는 것을 목표로, 하이닉스 0.6um High Voltage 공정을 사용하였으며, 8 비트 RGB 데이터 입력과 40V 구동전압에서 동작하도록 설계하였다.

• 대한인간공학회지
• /
• 제30권5호
• /
• pp.651-657
• /
• 2011

Objective: The aim of this study is to investigate the system to integrate and manage the in-vehicle interactions between the drivers and the in-vehicle mobile IT devices. Background: As the mobile IT technology is being used anywhere, the drivers are interacting with the mobile IT device on driving situations. The distraction of the driver's attention causes the car accidents. It is necessary to develop the HVI(Human Vehicle Interface System) to integrate and manage the in-vehicle interactions with IT devices. Method: The HVI System is designed not as the interfacing subject but as the supervising system to monitor the driver's status and support the driver to concentrate on the primary tasks. The HVI system collects the status information of the car and driver and estimate the driving workload. Results: The HVI system controls how to provide the output information based on the driving workload. We implemented the HVI system prototype and applied in the real vehicle with the HVI cell phone and the HVI car navigation system. Conclusion: Depending on the driving situations, the HVI system prevented the information output in dangerous situation and diversified the modality and the intensity of the output information. Application: We will extend the HVI system to be connected the other various IT devices and verity the effectiveness of the system through various experiments.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.726-729
• /
• 2013

본 논문에서는 LCD source driver IC의 output buffer op-amp로 사용가능한 저소비전력 및 높은 슬루율을 갖는 CMOS rail-to rail 입/출력 op-amp를 설계하였다. 제안한 op-amp는 기존의 출력단 Class-AB 단에 새로이 설계한 Class-B control단을 추가하여 저소비전력과 높은 슬루율을 갖게 하였다. 시뮬레이션 결과 제안된 op-amp는 소비전력이 1.19mW로 감소하였으며 사용한 부하커패시터 (10nF)를 기준으로 슬루율은 6.5V/us로 확인되었다.

• 전기전자학회논문지
• /
• 제25권2호
• /
• pp.381-387
• /
• 2021

과거 주로 게임과 동영상 재생에 있어 리얼함을 극대화하기 위해 사용되었던 HMD(Head Mount Display)의 수요가 증가하고, 그 활용 범위가 교육과 훈련 등으로 확대되면서, 기존 HMD의 성능을 향상시킬 수 있는 방안에 대한 관심이 높아지고 있다. 본 논문에서는 HMD의 각 화소 회로에 제어 신호를 보내는 gate driver의 성능을 향상시키기 위해 CNT를 포함한 트랜지스터를 활용하는 방법에 대해 논하고자 한다. 기존 gate driver의 버퍼부를 구성하는 트랜지스터를 CNT를 포함한 트랜지스터로 교체하는 회로 설계 방법을 제안하고, 그 성능을 회로 시뮬레이션을 통해 기존 트랜지스터로만 구성된 gate driver의 성능과 비교해 보고자 한다. 시뮬레이션 결과, gate driver에 CNT를 포함할 경우 12.5 GHz의 속도로 기존 gate driver 대비 약 0.3V 증가된 출력 전압(1.1V)을 얻을 수 있었으며, 최대 20배의 gate width를 줄일 수 있었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제4권4호
• /
• pp.269-274
• /
• 2004

Current delivery system, in which the analog current produced by a unique DAC circuit is stored into a current-memory circuit and delivered in a time-divided sequence, shows variation of output current as low as 4% in a current source data-driver IC for AM-OLED driven by a current-programmed method without any fuse repairing after fabrication. This driver IC has 54 outputs and can sink constant current as low as 3 ${\mu}A$ with 6-bit analog levels. Such a low current level without variation can hardly be obtained by an ordinary MOS transistor because the current level is in the sub-threshold region and changes exponentially with threshold voltage variation. Thus we adopted a current mirror circuit composed of bipolar transistors to supply well-controlled current within a nano-ampere range.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.696-699
• /
• 2008

A 10-bit source driver using low temperature poly-silicon(LTPS) TFTs is developed. To reduce the DAC area, the DAC structure including two 5-bit resistor-string DACs and analog buffer, which has analog adder is proposed. The source driver is fabricated using LTPS process and its one channel area is $3,200{\mu}m\;{\times}\;260{\mu}m$. The simulated INL and DNL of output voltages are less than 3 LSB and 1 LSB, respectively.

• Journal of Information Display
• /
• 제6권1호
• /
• pp.12-16
• /
• 2005

Gate and data drivers are essential for driving active matrix display. In this study, we integrate drivers with a-Si:H to develop a compact, better reliability and cost effective display. We design and fabricate drivers with conventional a-Si:H thin film transistors (TFTs). The output voltages are investigated according to the input voltage, temperature and operation time. Based on these studies, we propose here a new driver to prevent gate line from the floated state. For the external coupled voltage fluctuation, the proposed driver shows better stability.