• 산업기술연구
• /
• 제15권
• /
• pp.209-215
• /
• 1995

In this paper, a controller design method for uncertain linear systems by output feedback is proposed. This method utilizes the LQG/LTR procedure for systems with uncertainties described in the time domain. It is assumed that the uncertainties satisfy the matching conditions and their bounds are known. First, a robust state feedback controller design method is introduced. Then, it is asymtotically recovered for the output feedback system by the loop transfer recovery(LTR) method under a certain condition.

• 대한전기학회논문지
• /
• 제37권6호
• /
• pp.376-382
• /
• 1988

A small-signal low-frequency disturbance of the input line affects the regulated-output voltage of the series resonant converter. To mitigate the detrimental effect, the output feedback PI-controller is employed. Small-signal linear models are represented to characterize the closed loop series resonant converter system. Design equations for the PI-controller which satisfy stability and percent ripple conditions are derived from the closed-loop linear model. Experimental results are presented which show excellent correlation with theory.

• 대한전기학회논문지
• /
• 제45권2호
• /
• pp.273-282
• /
• 1996

This work is conceded with the estimation of output derivatives and their use for the design of robust controller for linear systems with system uncertainties due to modeling errors and disturbances. It is assumed that a nominal transfer function model and quantitative bounds for system uncertainties and known. The developed control schemes are shown to achieve regulation of the system output and ensures boundedness of the system states without imposing any structural conditions on system uncertainties and disturbances. Output derivative estimation is first conducted through restructuring of the plant in a specific parameterization. They are utilized for constructing robust nonlinear high-gain feedback controller of a SMC(Sliding Mode Control)type. The performances of the developed controller are evaluated and shown to be effective and useful through simulation study.

• 전기학회논문지
• /
• 제59권11호
• /
• pp.2066-2072
• /
• 2010

In this paper, a variable structure dynamic output feedback controller with an transformed sliding surface is designed for the improved robust control of a uncertain system under unmatched system uncertainty, matched input matrix uncertainty, and disturbance satisfying some conditions. This paper is extended from the results of the static output feedback VSS in [9]. To effectively remove the reaching phase problems, an initial condition of the dynamic output is determined. The previous some limitations on the dynamic output feedback variable structure controller is overcome in this systematic design. A stabilizing control is designed to generate the sliding mode on the predetermined sliding surface S=0 and as a results the closed loop exponential stability is obtained and proved together with the existence condition of the sliding mode on S=0 for all unmatched system matrix uncertainties. To show the usefulness of the algorithm, a design example and computer simulations are presented.

• 전력전자학회논문지
• /
• 제18권5호
• /
• pp.466-476
• /
• 2013

This paper describes a fuzzy control method to control the output voltage of the three-phase Z-source PWM rectifier. A fuzzy control system is a control system based on fuzzy logic, and the fuzzy controller uses a single input fuzzy theory with its fuzzification. Analytical structure of the simplest fuzzy controller is derived through the triangular membership functions with its fuzzification. By setting the membership functions of the fuzzy rules, fuzzy control is achieved. The PI portion of the output DC voltage controller is controlled by fuzzy method. To confirm the validity of the proposed method, the simulation and experiment were performed, The simulation is performed with PSIM and MATLAB/SIMULINK. For the experiment, we used a DSP(TMS320F28335) controller to compute the reference value and generate the PWM pulses. For the transient state performance of the output DC voltage control of Z-source PWM rectifier, the PI controller and fuzzy controller were compared, also the conventional PWM rectifier and Z-source PWM rectifier were compared. From the results, the Z-source rectifier could allow to buck or boost of the output DC voltage. Through the analysis of the transient state, we could observe that the fuzzy controller has better performance than the conventional PI controller.

• 제어로봇시스템학회논문지
• /
• 제10권3호
• /
• pp.216-224
• /
• 2004

In this paper we address reliable output feedback control problem for a class of linear systems with actuator/sensor failures. An output feedback control method is proposed which stabilizes the plant and guarantees $H_\inftyt$-norm constraint against all admissible actuator/sensor failures. The controller can be obtainer by solving some LMls that cover all failure cases. Effectiveness of this controller is validated via a numerical example. This paper addresses reliable output feedback control problem for a class of linear systems with actuator/sensor failures. An output feedback control method is proposed which stabilizes the plant and guarantees $H_\inftyt$-norm constraint against all admissible actuator/sensor failures. The controller can be obtained by solving some LMls that cover all failure cases. Effectiveness of this controller is validated via numerical example.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.253-258
• /
• 2002

This work is concerned with the estimation of output derivatives and their use for the design of robust controller for linear systems with systems uncertainties due to modeling errors and disturbance. It is assumed that a nominal transfer function model and quantitative bounds for system uncertainties are known The developed control schemes are shown to achieve regulation of the system output and ensures boundedness of the system states without imposing any structural conditions on system uncertainties and disturbances. Output derivative estimation is first conducted trough restructuring of the plant in a specific parameterization. They are utilized for constructing robust nonlinear high-gain feedback controller of a SMC(Sliding Mode Controller)Type. The performances of the developed controller are evaluated and shown to be effective and useful through simulation study.

• 전기학회논문지
• /
• 제56권2호
• /
• pp.389-395
• /
• 2007

In this paper, we consider the robust non-fragile $H_{\infty}$ output feedback controller design method for uncertain descriptor systems with feedback and observer gain variations. The existence condition of observer-based robust and non-fragile $H_{\infty}$ output feedback controller and the controller design method are Presented on the basis of linear matrix inequality approach. The proposed robust non-fragile $H_{\infty}$ output feedback controller guarantees asymptotic stability, non-fragility, $H_{\infty}$ norm bound within a prescribed level in spite of disturbance, parameter uncertainty, and feedback/observer gain variations.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.271-271
• /
• 2000

This paper considers guaranteed cost output feedback controller for the uncertain time-varying delay systems with delays in state and control input. The uncertainty in the system is assumed to be norm-bounded and time-varying. The sufficient condition for the existence of controller and the guaranteed cost output feedback controller design method are presented. Also, using some changes of variables and Schur complements, the obtained sufficient condition can be reformulated as LMI forms in terms of transformed variables. Using the obtained LMI variables, we derive guaranteed cost controller gain and guaranteed cost.

• 제어로봇시스템학회논문지
• /
• 제17권4호
• /
• pp.299-303
• /
• 2011

In this paper, we propose an output feedback controller for a chain of integrators system compensating measurement noise of feedback sensor. Measurement noise makes feedback signals distorted, and results in performance degradation or even system failure. Therefore, we need to design a robust controller to accommodate the possible measurement noise in the feedback information. Our controller is equipped with a gain-scaling factor to reject or minimize the effect of measurement noise in output feedback information. We give a theoretical analysis of the controlled system and illustrate the improved control performance via an example.