• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.2
• /
• pp.295-300
• /
• 2010

Inconel 718 alloy, widely used as material of aircraft engine, has a good mechanical property in high temperature, strong anti-oxidation characteristics in oxidated current over $900^{\circ}C$, and also is not easily digested in the air containing sulfur, therefore, its usage as mechanical component is expanding rapidly. Even though Inconel alloy 718 is difficult to machine, it requires highly precise processing/machining to sustain its component quality of high accuracy. In this paper, general turning operation conditions arc tested to select the best cutting process condition by measuring surface roughness through implementing experiments with orthogonal array of cutting speed, feeding speed and cutting depth as processing parameters based on the Taguchi method. Optimal turning operation conditions are extracted from the proposed experimental models.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.5 no.4
• /
• pp.59-64
• /
• 2006

High Speed Machining(HSM) reduces machining time and improves surface accuracy because of the high cutting speed and feedrate. Development of HSM makes it allowable to machine difficult-to-cut material and use small-size-endmill. It is however limited to cutting condition and tool material. In the machining operation, it is important to check main parameter of tool life and select optimal cutting condition because tool breakage can interrupt progression of operation. In this study, cutting parameters are determined to 3 factors and 3 levels which are a spindle speed, a feedrate and a width of cut. Experiment is designed to orthogonal array table for L9 with 3 outer array using Taguchi method. Also, it is proposed to inspect significance of the optimal factors and levels by ANOVA using average of SN ratio for tool life. Finally, estimated value of SN ratio in the optimal cutting condition is compared with measured one in the floor shop and reduction of loss is predicted.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.2
• /
• pp.122-129
• /
• 2012

As a greedy algorithm reconstructing the sparse signal from underdetermined system, orthogonal matching pursuit (OMP) algorithm has received much attention in recent years. In this paper, we present an extension of OMP for pursuing efficiency of the index selection. Our approach, referred to as generalized OMP (gOMP), is literally a generalization of the OMP in the sense that multiple (N) columns are identified per step. Using the restricted isometry property (RIP), we derive the condition for gOMP to recover the sparse signal exactly. The gOMP guarantees to reconstruct sparse signal when the sensing matrix satisfies the RIP constant ${\delta}_{NK}$ < $\frac{\sqrt{N}}{\sqrt{K}+2\sqrt{N}}$. In addition, we show recovery performance and the reduced number of iteration required to recover the sparse signal.

• Journal of Industrial Technology
• /
• v.31 no.B
• /
• pp.59-65
• /
• 2011

In this study, LCD Cell process has been analyzed through ARENA simulation. The major concern is to find the condition maximizing production rate (or quantity per hour). For the analysis, we have selected 4 factors and performed simulation experiments through $L_8(2^7)$ orthogonal arrays. Our results indicate that the production may be maximized with well selected conditions proposed in this study. The results obtained from this study may provide a good base for practical applications.

• International Journal of Reliability and Applications
• /
• v.2 no.2
• /
• pp.117-130
• /
• 2001

Consider the problem of estimating the system reliability using noninformative priors when both stress and strength follow generalized gamma distributions. We first treat the orthogonal reparametrization and then, using this reparametrization, derive Jeffreys'prior, reference prior, and matching priors. We next provide the suffcient condition for propriety of posterior distributions under those noninformative priors. Finally, we provide and compare estimated values of the system reliability based on the simulated values of the parameter of interest in some special cases.

• Journal of Korean Institute of Industrial Engineers
• /
• v.4 no.2
• /
• pp.49-58
• /
• 1978

The purpose of this study was to analyze the actual condition of curriculum composition by factor analysis, then to find out the peculiarity of each factor through factor loading. The method adopted here is to classify and arrange the curricula in accordance with the similarity of each subject, to put it into computer, and to get 16 factors whose eigenvalues are at least 1.00. Consequentely, before the orthogonal rotation 67% of the curricula which have the given factors and maximum factor loading were distributed from factor 1 to factor 4, and after orthogonal rotation 45% of the curricula were distribued.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.4
• /
• pp.69-73
• /
• 2006

This paper present the optimal cleaning condition of the out-hull preprocessing robot by Taguchi method in design of experiments. A $L_8(2^4)$ orthogonal array is adopted to study the effect of adjustment parameters. The adjustment parameters consist of robot speed, motor torque, motor speed and tool angle. And the quality feature is selected as surface roughness of sheet metal. Taguchi analysis is performed in order to evaluate the effect of adjustment parameters of the quality feature of cleaning process by $Minitab^{(R)}$.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.4
• /
• pp.48-53
• /
• 2009

Inconel 718 alloy, widely used as material of aircraft engine, has a good mechanical property in high temperature, strong anti-oxidation characteristics in oxidated current over $900^{\circ}C$, and also is not easily digested in the air containing sulfur, therefore, its usage as mechanical component is expanding rapidly. Even though Inconel alloy 718 is difficult to machine, it requires highly precise processing/machining to sustain its component quality of high accuracy. In this paper, general turning operation conditions are tested to select the best cutting process condition by measuring surface roughness through implementing experiments with orthogonal array of cutting speed, feeding speed and cutting depth as processing parameters based on the Taguchi method. Optimal turning operation conditions are extracted from the proposed experimental models.

• Journal of Korean Society for Quality Management
• /
• v.19 no.2
• /
• pp.166-171
• /
• 1991

The purpose of this paper is on determining the optimum hydrogenation conditions of oil & fats of toilet soap for improving the process capability and quality. This paper employs the orthogonal table $L_8(2^7)$ The result of this paper is as follows: (1) The optimum condition of hydrogenation is determined as $A_1$, $B_2$, $C_2$, $D_2$ and the presumed value of average melting point is $42.54{\pm}1.70$(${\alpha}=0.05$) (2) The index of process capability(Cp)is improved from 0.50 to 1.39.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.2
• /
• pp.668-676
• /
• 1991

Turbulent flows around tube banks and in the diffuser were studied using a non-orthogonal boundary fitted coordinate system and the modified K-.epsilon. turbulence model. In these cases, many problems emerge which stem from the geometrical complexity of the flow domain and the physical complexity of turbulent flow itself. To treat the complex geometry, governing equations were reformulated in a non-orthogonal coordinate system with Cartesian velocity components and discretised by the finite volume method with a non-staggered variable arrangement. The modified K-.epsilon. model of Hanjalic and Launer was applied to solve above two cases under the condition of strong and mild pressure gradient. The results using the modified K-.epsilon. model results in both test cases.