• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권11호
• /
• pp.505-510
• /
• 2005

On this study, we optimized maximizing the thrust force at the TFLM(Transverse Flux Linear Motor) using design of experiments by the table of orthogonal array and the analysis of means(ANOM), and classified the most contributive design factor maximizing the thrust force at the TFLM by analysis of variance(ANOVA). From now on, we are going to apply the required technique to design various uses and shapes of the TFLM.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.395-396
• /
• 2006

This paper presents the optimal design of Robot-Arm part use Design of Experiment(DOE). The DOE(Design of Experiment)was conducted to find out main effect factors for design of Robot-Arm part. In this design of Robot-Arm, 5 control factors include numbers of 4 level are selected and we make out L16 orthogonal array. Using this orthogonal array, find out optimal value and main effect factors of object function for design of Robot-Arm part by 16 times of test. We evidence this optimal value by using CATIA V5 Analysis.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.279-284
• /
• 2000

The object of this paper is to evaluate the chip breakability using the experimental equation of surface roughness, which is developed in turning by an orthogonal array method. L$\sub$9/(3$^4$) orthogonal array method, one of fractional factorial design has been used to study effects of main cutting parameters such as cutting speed, feed rate and depth of cut, on the surface roughness. The evaluation of chip breakability is used the chip breaking index(C$\sub$B/), non-dimensional parameter. And the analysis of variance (ANOYA)-test has been used to check the significance of cutting parameters. Using the result of ANOYA-test, the experimental equation of chip breakability, which consists of significant cutting parameters, has been developed. The coefficient of determination of this equation is 0.866.

• 한국자동차공학회논문집
• /
• 제3권2호
• /
• pp.62-76
• /
• 1995

The safety analysis becomes very essential in the crash environment with the growth of automobile industry. Recently, an airbag system is required to protect the occupant. The effects of an airbag can be evaluated exactly from the barrier or sled test which is quite expensive. The airbag system in a passenger car is analyzed with the occupant analysis program. The modeling of the passenger car including an airbag is established and the results are verified by comparisons with real crash tests. However, the solution of an airbag design can not be obtained easily with the conventional method such as an optimization due to the nonlinearity and complexity of the problem. An iterative design algorithm using the orthogonal array is proposed to overcome the difficulties. The design trend of an airbag is recommended to minimize the injury of an occupant with the proposed design algorithm and the results are discussed.

• 동력기계공학회지
• /
• 제18권2호
• /
• pp.19-24
• /
• 2014

This research conducts CAE analysis of fire damper and design of damper controlling system. The prediction of the design heat transfer was done the answer of fire damper could be obtained by using continuity equation of damper controlling and orthogonal array. Through the design analysis of optimal offshore construction, new fire damper of H-120 class was designed. Accordingly, this equipment will be tested in actual offshore construction. Finally, we could obtain fire damper of optimal design with orthogonal array. With the CAE results of this research, The offshore plant will obtain eco-friendly fire damper with a method to select optimal condition of fire damper with orthogonal array.

• 한국안전학회지
• /
• 제23권6호
• /
• pp.1-6
• /
• 2008

Machine operator and quality are affected by chip during cutting process to product machine parts. This paper presents a study of the influence of cutting conditions on the surface roughness obtained by turning using Taguchi method for safety of turning operator. In the machining of titanium alloy, high cutting temperature and strong chemical affinity between the tool and the work material are generated because of its low thermal conductivity and chemical reactivity. Therefore titanium alloys are known as difficult-to materials. An orthogonal array, the signal-to-noise ratio, the analysis of variance are employed to investigate the cutting characteristics of implant material bars using tungsten carbide cutting tools of throwaway type. Also Experimental results by orthogonal array are compared with optimal condition to evaluate advanced reliability. Required simulations and experiments are performed, and the results are investigated.

• 한국소음진동공학회논문집
• /
• 제13권6호
• /
• pp.423-429
• /
• 2003

On this study. we improved the efficiency applying algorithm that is repeatedly using table of orthogonal array in discrete design space and filling a defect of gradient method in continuous design space. we showed optimal ply angle that maximized 1st natural frequency of CFRP laminated composite plate without a hole and with a hole by each aspect ratio. In the case of CFRP laminated composite plate without a hole, we confirmed the reliance and efficiency of algorithm in comparison with the result of optimization achievement repeatedly using statistical table of orthogonal array of experimental design and the BFGS optimal design method.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.42-45
• /
• 1998

Adaptive array antenas have emerged as a useful technique to enhance the cell capacity of mobile communications. In this research, to analyze the noncoherent CDMA systems employing adaptive array antennas, we modeled the transmitting signal of CDMA systems using M-ary orthogonal modulation. And we induced the conditional probability density function about the decision variable, the output of 2D-RAKE receiver and mean symbol error prabability through statistical analysis about MAI(Multiple Access Interference), SI(Self Interference) and Noise. Also, we analyzed the charateristics of adaptive array antenna for noncoherent CDMA systems using M-ary orthogonal modulation according to the distance between the array elements, doppler frequency and AOS(Angle of Spread).

• Journal of the Korean Statistical Society
• /
• 제35권1호
• /
• pp.49-61
• /
• 2006

Wu et al. (1992) constructed some general classes of tight asymmetric orthogonal arrays of strength 2 using the method of grouping. Rains et al. (2002) obtained asymmetric orthogonal arrays of strength 2 using the concept of mixed spread in finite projective geometry. In this paper, we obtain some new tight asymmetric orthogonal arrays of strength 2 using the concept of mixed partition in finite projective geometry.

• 한국정밀공학회지
• /
• 제29권12호
• /
• pp.1272-1278
• /
• 2012

The micro barrier rip array structures have been applied in a variety of areas including as privacy films, micro heat sinks, touch panel and optical waveguide. The increased aspect ratio (AR) of barrier rip array structures is required in order to increase the efficiency and performance of these products. There are several problems such as burr, defect of surface roughness and deformation and breakage of barrier rip structure with machining high-aspect ratio micro barrier rip array structure using orthogonal cutting method. It is essential to develop technological methods to solve these problems. The optimum machining conditions for machining micro barrier rip array structures having high-aspect ratio were determined according to lengths ($200{\mu}m$ and $600{\mu}m$) and shape angles ($2.89^{\circ}$ and $0^{\circ}$) of diamond tool, overlapped cutting depths ($5{\mu}m$ and $10{\mu}m$), feed rates (100 mm/s) and three machining processes. Based on the optimum machining conditions, micro barrier rib array structures having aspect ratio 30 was machined in this study.