• The korean journal of orthodontics
• /
• v.34 no.3 s.104
• /
• pp.269-277
• /
• 2004

A modified removable appliance for molar distalization called C-activator was used in a 10-year old male patient with a Class II anterior deep bite malocclusion with upper arch discrepancy. The treatment plan involved correcting the Class ll relationship, distalizing both upper first molars, and regaining space for the erupting canines. The C-activator, which was used for 6 months, consisted of a labial framework formed from .036-in stainless steel wire and an acrylic monobloc. Both the closed helices of the labial framework were compressed for reactivation during the C-activator treatment period. C-activator mechanics simultaneously achieved distalization of the upper first molars into their proper positions and repositioning of the mandible. After 21 months of treatment, the correct oberbite and overjet was obtained and contributed to an Improvement in facial balance. The treatment results were stable 6 months after debonding. Fabrication and placement of the new appliance and clinical procedures are detailed, and the treatment sequence and results of this case are presented as follows.

• The korean journal of orthodontics
• /
• v.27 no.2
• /
• pp.315-326
• /
• 1997

The purpose of this study was to evaluate the shear bond strength of three kinds of different ceramic brackets with three different bonding adhesives. 5 specimens for each combination were tested for shear bond strength using Instron and for fracture site using SENL And 3 specimens were cross-sectioned for SEM examination of bonding pattern between bracket, resin and enamel surface. The results were as follows 1. The shear bond strength of chemical curing adhesives were higher than that of light curing adhesives. 2. The shear bond strength of Starfire bracket, chemical-bonded type, was lower than that of Transcend bracket, mechanical-bonded type, and Fascination bracket, combined type. 3. Fracture site of each bracket and tooth surface was examined under a light optical stereoscopic microscope, Transcend groups were mainly at the E/R intderface. Fascination groups were mainly at the COMB interface and Starfire groups were mainly at the R/B interface.

• The korean journal of orthodontics
• /
• v.37 no.1 s.120
• /
• pp.73-84
• /
• 2007

The maxillary protraction headgear has been widely used in the treatment of skeletal Class III children with maxillary deficiency. A variety of treatment objectives which allow dentoalveolar movements may be established, but when only maxillary protraction without dentoalveolar movement is needed, one of the limitations in maxillary protraction with conventional tooth-borne anchorage is the loss of dental anchorage. This is because a bone remodeling occurs not only at circummaxillary sutures but also within the periodontal tissues. During protraction treatment in the mixed dentition phase, in older children or for the patient with multiple congenitally missing teeth, it is not uncommon to observe undesirable mesial movement of maxillary teeth. Such a side effect can be eliminated or minimized using absolute anchorage such as skeletal anchorage. The purpose of this case report is to introduce a new technique of the maxillary protraction headgear treatment using surgical miniplates.

• Korean Journal of Cleft Lip And Palate
• /
• v.15 no.1
• /
• pp.11-20
• /
• 2012

A national wide survey was conducted to assess a present condition in management of cleft and craniofacial anomaly patients and training program of orthodontic residents in Korea. A questionnaire consisting of four categories and 19 question items was distributed to 131 residents of department of orthodontics of eleven dental university hospitals and nine medical university hospitals. The results were as follows:(1) 77.1% of residents are participating in treatment of cleft and craniofacial anomaly patients.(2) Only 47.3% of residents are willing to treat cleft and craniofacial anomaly patients in their future practice.(3) 64.9% of residents responded that they are currently treating one to ten cleft and craniofacial anomaly patients per resident.(4) Most university hospitals offer training programs focusing on embryopathogenesis, growth, and treatment, but training programs about speech and hearing, genetics, and psychosocial development are inadequate.(5) 37.4% of residents are willing to participate in fellowship program for cleft and craniofacial anomaly after finishing the training. Based on the results of this survey, the residents need motivation regarding treatment of cleft and craniofacial anomaly patients, and the educational programs need to be reinforced and reconstructed so that standardization among hospitals can be achieved.

• The korean journal of orthodontics
• /
• v.46 no.4
• /
• pp.220-227
• /
• 2016

Objective: The aim of this study was to translate the Psychosocial Impact of Dental Aesthetics Questionnaire (PIDAQ) into Turkish, validate the questionnaire, and provide a cross-cultural adaptation. Methods: The translation process included the following steps, which were performed by a translation committee: (1) translation into Turkish, (2) back translation into English, (3) pretesting, and (4) cross-cultural adaptation. The Turkish version of the PIDAQ was produced subsequent to the translation process. Validity and reliability were measured using the Perception of Occlusion Scale and the aesthetic component of the Index of Orthodontic Treatment Need. The questionnaire was administered to 260 individuals (age range, 18-30 years; mean age, $20.50{\pm}1.9$ years). Structural validity was assessed via factor analysis, and internal consistency was measured using Cronbach's alpha coefficient. Results: Factor analysis revealed a four-factor structure, with factor loadings for included items ranging from 0.380 to 0.868. Few questions were shuffled among domains various factor loadings. Cronbach's alphas for the Turkish version of the PIDAQ ranged from 0.534 to 0.904. Mean scores for the PIDAQ subscale and total scores differed significantly according to Index of Orthodontic Treatment Need and Perception of Occlusion Scale scores. Conclusions: This study provided a Turkish version of the PIDAQ, which could be a useful tool in the evaluation of the psychosocial impact of malocclusion in young Turkish adults.

• The korean journal of orthodontics
• /
• v.33 no.1 s.96
• /
• pp.21-29
• /
• 2003

Recent developments in software technology have made it possible to create a virtual three-dimensional model of the dental arches from digitally scanned casts of a patient's dentition. This modelmay then be manipulated with software to produce stages of tooth movement from the initial malocclusion to the final desired occlusion. A sterolithograghic model is made for each stage of tooth movement which is the basis for construction of a series of clear and thin overlay appliances. These appliances are worn full time by the patient to move the teeth according to the programmed stages of movement. Malocclusions involving mild to moderate crowding and space closure have been proven to be successfully treated with this appliance. Experience with this appliance has demonstrated excellent patient compliance with less discomfort, improved esthetics and oral hygiene control, when compared with fixed orthodontic appliances. Orthodontic treatment with this appliance is a potentially useful alternative approach to fixed appliances for treatment of a variety of malocclusions in patients with fully erupted permanent teeth.

• The korean journal of orthodontics
• /
• v.35 no.3 s.110
• /
• pp.174-181
• /
• 2005

Understanding the level of a person's perception of changes that have occurred on the face after orthodontic treatment is critical to the process of orthodontic diagnosis and treatment planning. The purpose of this study was to determine the level of perception of profile and frontal changes in lower facial height. Forty students attending art school participated in a study evaluating the level of a participant's perception of changes in the lower facial height. Participants compared computer-graphic frontal and profile photographs with balanced proportions and photograph simulations of 1, 2, 3, and 4mm changes in lower facial height from stomion to the chin. At least a 2 mm change in lower facial height for the profile view and 3mm in the frontal view was needed to be perceived after orthodontic treatment. The level of a person's perception of the change in lower facial height was more sensitive in the profile view than in the frontal view, and information about facial changes given prior to evaluation enhanced the level of perception.

• The korean journal of orthodontics
• /
• v.31 no.5 s.88
• /
• pp.499-504
• /
• 2001

Transverse skeletal deficiency is a common clincal problem associated with narrow basal and dentoalveolar bone. The clinical characteristics of transverse deficiency presents with anterior crowding and posterior buccal crossbite. Orthodontic expansion, using lip bumper and functional devices, was recommanded for younger ages. However, expansion of lower anterior area in older Patients is unstable and tends to relapse toward the original dimension. Distraction osteogenesis is a unique form of clincal tissue engineering and biologic process of new bone formation between bone segments that are gradually separately by incremental traction. Distraction osteogenesis was considered that great potential for correcting transverse mandibular deficiencies. In this Paper, a case of treated transverse deficiency patients with distraction osteogenesis using tooth-borne and tooth & bone-borne distractor is presented.

• The korean journal of orthodontics
• /
• v.22 no.2 s.37
• /
• pp.373-388
• /
• 1992

The purpose of this study was to clarify the histologic changes in the expansion of midpalatal suture by the tensile forces. 39 Sprague-Dawley rats were divided into a control group (3 rats) and three experimental groups (36 rats) -group 1, pressured with a light force(50-75 g), group 2, with a heavy force(250-300 g) and group 3, with a heavy force (250-300 g) plus laser irradiation. Autoradiographic and histopathologic observations were performed in 12, 24, 48 and 96 hours after force delivery. The results were as follows; 1. The anterior portion of midpalatal suture was more separated than the posterior portion in all experimental groups. Group 2 showed more separation than group 1 and no difference to group 3 2. Ligament tearing appeared intensively in 24 hours, but the sutural matrices increased with times. ; Group 2 showed more tearing than group 1, and active regeneration of sutural matrices was observed in group 3. 3. Vascular dilatation appeared intensively in 24 hours and decreased with times. ; The anterior portion of midpalatal suture showed more dilatation than the posterior portion, ; The changes was the greatest in group 3, group 2, group 1, in that order. 4. New bone formation and the new capillary prolieferation began to appear in 12 hours and increased with times, : Group 2 showed more changes than group 1 and no difference to group 3. 5. Infiltration of inflammatory cells was little observed and was the greatest in group 2, group 1, group 3, in that order 6. Positive reaction of cells to $[^3H]$ thymidine was the greatest in 24 hours, and decreased with times ; The reaction was the greatest in group 3, group 2, group 1, in that order.

• The korean journal of orthodontics
• /
• v.46 no.1
• /
• pp.3-12
• /
• 2016

Objective: The purpose of this study was to compare the precision of three-dimensional (3D) images acquired using iTero$^{(R)}$(Align Technology Inc., San Jose, CA, USA) and Trios$^{(R)}$(3Shape Dental Systems, Copenhagen, Denmark) digital intraoral scanners, and to evaluate the effects of the severity of tooth irregularities and scanning sequence on precision. Methods: Dental arch models were fabricated with differing degrees of tooth irregularity and divided into 2 groups based on scanning sequence. To assess their precision, images were superimposed and an optimized superimposition algorithm was employed to measure any 3D deviation. The t-test, paired t-test, and one-way ANOVA were performed (p < 0.05) for statistical analysis. Results: The iTero$^{(R)}$ and Trios$^{(R)}$ systems showed no statistically significant difference in precision among models with differing degrees of tooth irregularity. However, there were statistically significant differences in the precision of the 2 scanners when the starting points of scanning were different. The iTero$^{(R)}$ scanner (mean deviation, $29.84{\pm}12.08{\mu}m$) proved to be less precise than the Trios$^{(R)}$ scanner ($22.17{\pm}4.47{\mu}m$). Conclusions: The precision of 3D images differed according to the degree of tooth irregularity, scanning sequence, and scanner type. However, from a clinical standpoint, both scanners were highly accurate regardless of the degree of tooth irregularity.