• Journal of Periodontal and Implant Science
• /
• 제49권3호
• /
• pp.185-192
• /
• 2019

Purpose: Implant wall thickness and the height of the implant-abutment interface are known as factors that affect the distribution of stress on the marginal bone around the implant. The goal of this study was to evaluate the long-term effects of supracrestal implant placement and implant wall thickness on maintenance of the marginal bone level. Methods: In this retrospective study, 101 patients with a single implant were divided into the following 4 groups according to the thickness of the implant wall and the initial implant placement level immediately after surgery: 0.75 mm wall thickness, epicrestal position; 0.95 mm wall thickness, epicrestal position; 0.75 mm wall thickness, supracrestal position; 0.95 mm wall thickness, supracrestal position. The marginal bone level change was assessed 1 day after implant placement, immediately after functional loading, and 1 to 5 years after prosthesis delivery. To compare the marginal bone level change, repeated-measures analysis of variance was used to evaluate the statistical significance of differences within groups and between groups over time. Pearson correlation coefficients were also calculated to analyze the correlation between implant placement level and bone loss. Results: Statistically significant differences in bone loss among the 4 groups (P<0.01) and within each group over time (P<0.01) were observed. There was no significant difference between the groups with a wall thickness of 0.75 mm and 0.95 mm. In a multiple comparison, the groups with a supracrestal placement level showed greater bone loss than the epicrestal placement groups. In addition, a significant correlation between implant placement level and marginal bone loss was observed. Conclusions: The degree of bone resorption was significantly higher for implants with a supracrestal placement compared to those with an epicrestal placement.

• 대한치과기공학회지
• /
• 제41권1호
• /
• pp.31-41
• /
• 2019

Purpose: This provides basic data for improving educational effectiveness by selecting and applying basic vocational competency applicable to dental technology's sub-major curricula by determining and researching dental technicians' awareness levels concerning the basic vocational competency's importance. Methods: 170 dental technicians working in Daegu, Korea were surveyed using a self-administered questionnaire between 9 January 2018 and 23 February 2018. Results: 1. The highest level of the basic vocational competency elements by the awareness levels of importance in dental technology laboratories was shown in the occupational ethics, followed by technological skills, interpersonal skills, self-development levels, problem-solving skills, information skills, resource management skills and skills for understanding groups, communication skills, and mathematical skills. 2. Female dental technicians put relatively higher importance on writing documents and managing time, while males stressing on basic statistics. 3. Dental laboratory CEOs and managers put high values on resource management skills, while head technicians valuing information skills more. 4. The awareness levels concerning the basic vocational competency importance in some dental technology fields did not match those of the dental technology laboratories in the fields of porcelain, crown and bridge, and orthodontics. Conclusion : This study demonstrates that the awareness levels concerning basic vocational competency's importance in some fields of dental technology differ from those of dental technology laboratories. Developing a basic vocational competency curriculum, it seems necessary to find ways to increase educational effectiveness by selecting and applying the basic vocational competency for the respective fields of dental technology.

• Journal of Periodontal and Implant Science
• /
• 제49권4호
• /
• pp.237-247
• /
• 2019

Purpose: To analyze the maxillary sinus anatomy over edentulous ridges in the bilateral posterior maxillary area in Taiwanese patients using cone-beam computed tomography (CBCT). Methods: In total, 101 anatomical sites from 61 patients, including 32 premolar and 69 molar regions, were analyzed using CBCT. Measurements were made of the width and height of edentulous ridges, the thickness of the lateral wall of the maxillary sinus, and the presence of a sinus septum and the posterior superior alveolar artery (PSAA). A statistical analysis of the measurements was performed, and correlations among the measurements were assessed. Results: The average ridge width was $10.26{\pm}3.16mm$, with a significantly greater ridge width in the second molar region than in the premolar region. The mean residual ridge height was $8.55{\pm}4.09mm$, and ridge height showed an opposite trend from ridge width for the premolar and molar regions. A sinus septum was present at 5.9% of the sites, and the PSAA was observed in 24.5%. The average thickness of the lateral wall of the maxillary sinus was $2.08{\pm}0.94mm$, with no significant difference between the tooth position and lateral wall thickness. Conclusions: This study presents the anatomical features of the maxillary sinus, which should be considered in sinus lift procedures for implant placement, in the Taiwanese population. The use of CBCT is recommended to avoid intraoperative complications.

• 대한치과교정학회지
• /
• 제49권3호
• /
• pp.181-187
• /
• 2019

Objective: This study investigated the relationship between orthodontic treatment and temporomandibular disorders (TMD) in South Korean population. Methods: This study obtained data from the 2012 Korean National Health and Nutrition Examination Survey. The final sample size was 5,567 participants who were ${\geq}19$ years of age. Logistic regression analysis was performed to evaluate the relationship between orthodontic treatment and TMD. Results: Participants who underwent orthodontic treatment showed higher educational level, lower body mass index, reduced chewing difficulty, and reduced speaking difficulty. The adjusted odds ratios (ORs) and their 95% confidence intervals (CIs) for orthodontic treatment and TMD were 1.614 (1.189-2.190), 1.573 (1.162-2.129) and 1.612 (1.182-2.196) after adjusting for age, sex and psychosocial factors. Adjusted ORs and their 95% CIs for orthodontic treatment and clicking were 1.778 (1.289-2.454), 1.742 (1.265-2.400) and 1.770 (1.280-2.449) after adjusting for confounding factors. However, temporomandibular joint pain and functional impairment was not associated with orthodontic treatment. Conclusions: Temporomandibular joint pain and dysfunction was not associated with orthodontic treatment.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제45권2호
• /
• pp.76-82
• /
• 2019

Objectives: To appraise the effectiveness of platelet-rich fibrin (PRF) in the management of established dry socket in terms of pain, inflammation, and wound healing. Materials and Methods: Two hundred patients with established alveolar osteitis were studied to determine the efficacy of PRF and zinc oxide eugenol (ZOE) for pain control, inflammation reduction, and wound healing. Patients were randomly allocated to Group A (PRF) or Group B (ZOE). Patients were examined on the 1st, 3rd, 7th, and 14th postoperative day and evaluated for pain using visual analogue scale scores, inflammation with a gingival index score, and wound healing through a determination of the number of bony walls exposed. Results: Group A showed better results in terms of pain remission, control of inflammation, and wound healing compared to Group B. Results between groups were statistically significant (P<0.05). Conclusion: PRF is a better alternative than ZOE for the effective management of alveolar osteitis.

• The Journal of Advanced Prosthodontics
• /
• 제13권3호
• /
• pp.136-143
• /
• 2021

Purpose. This study aimed to evaluate the effect of repeated use of an implant handpiece under an implant placement torque (35 Ncm) and overloading torque condition (50 Ncm) on an output torque. Materials and Methods. Two types of implant handpiece systems (Surgicpro/X-DSG20L [NSK, Kanuma, Japan] and SIP20/CRB46LN [SAESHIN, Daegu, South Korea]) were used. The output torque was measured using a digital torque gauge. The height and angle (x, y, and z axes) of the digital torque gauge and implant handpiece were adjusted through a jig for passive connection. The experiment was conducted under the setting torque value of 35 Ncm (implant placement torque) and 50 Ncm (overloading torque condition) and 30 times per set; a total of 5 sets were performed (N = 150). For statistical analysis, the difference between the groups was analyzed using the Mann-Whitney U test and the Friedman test was used to confirm the change in output torque (α=.05). Results. NSK and SAESHIN implant handpieces showed significant differences in output torque results at the setting torques of 35 Ncm and 50 Ncm (P<.001). The type of implant handpiece and repeated use influenced the output torque (P<.001). Conclusion. There may be a difference between the setting torque and actual output torque due to repeated use, and the implant handpiece should be managed and repaired during long-term use. In addition, for successful implant results in dental clinics, the output torque of the implant handpiece system should be checked before implant placement.

• 대한치위생과학회지
• /
• 제3권2호
• /
• pp.1-8
• /
• 2020

This study investigated the relationship between oral health knowledge, behavior and orthodontic satisfaction in orthodontic patients visiting dental hospitals and clinics and provided suggestions to improve orthodontic patients' satisfaction. This study anayzed structured self-administered questionnaires collected from 245 patients who visited 5 dental clinics in Gwangju Metropolitan City. Regarding oral health knowledge, the highest percentage of correct answers was for the item "Cavities heal themselves over time" (97.1%), and the lowest percentage of correct answers was for the item "Cavity bacteria move from tooth to tooth" (16.7%). Five fluoride items showed a lower percentage of correct answers than those for cavity and gingival diseases. Regarding the survey on oral health behavior, the highest score was found for the item "I brush my teeth with a certain method and order" (3.78 out of 5), and the lowest score was found for the item "I use an electric toothbrush" (1.34 out of 5). Regarding the survey on orthodontic satisfaction, the highest score was found for the item "I would recommend receiving medical treatment at the department of orthodontics" (4.23), and the lowest score was found for the item "Orthodontic cost is reasonable" (3.46). While oral health behavior had on orthodontic satisfaction, oral health knowledge had no effect on it. Oral health behaviors should be improved to enhance orthodontic satisfaction. To improve oral health behavior, it is necessary to develop and activate education programs for tooth brushing and oral care for orthodontic patients.

• Imaging Science in Dentistry
• /
• 제50권4호
• /
• pp.291-298
• /
• 2020

Purpose: The detection and exact localization of penetrating foreign bodies are crucial for the appropriate management of patients with dentoalveolar trauma. This study compared the efficacy of cone-beam computed tomography (CBCT) and spiral computed tomography (CT) scans for the detection of different foreign bodies composed of 5 frequently encountered materials in 2 sizes. The effect of the location of the foreign bodies on their visibility was also analyzed. Materials and Methods: In this in vitro study, metal, tooth, stone, glass, and plastic particles measuring 1×1×1 mm and 2×2×2 mm were prepared. They were implanted in a sheep's head in the tongue muscle, nasal cavity, and at the interface of the mandibular cortex and soft tissue. CBCT and spiral CT scans were taken and the visibility of foreign bodies was scored by 4 skilled maxillofacial radiologists who were blinded to the location and number of foreign bodies. Results: CT and CBCT were equally accurate in visualizing metal, stone, and tooth particles of both sizes. However, CBCT was better for detecting glass particles in the periosteum. Although both imaging modalities visualized plastic particles poorly, CT was slightly better for detecting plastic particles, especially the smaller ones. Conclusion: Considering the lower patient radiation dose and cost, CBCT can be used with almost equal accuracy as CT for detecting foreign bodies of different compositions and sizes in multiple maxillofacial regions. However, CT performed better for detecting plastic particles.

• Imaging Science in Dentistry
• /
• 제50권4호
• /
• pp.299-307
• /
• 2020

Purpose: The diagnosis of chronic rhinosinusitis requires a comprehensive knowledge of the signs and symptoms of the disease and an accurate radiographic assessment. Computed tomography (CT) is the superior imaging modality for diagnosis of chronic rhinosinusitis. However, considering the lower dose and higher resolution of cone-beam computed tomography (CBCT) compared to CT, this study aimed to assess the agreement between the findings of CBCT and functional endoscopic sinus surgery (FESS). Materials and Methods: This descriptive prospective study evaluated 49 patients with treatment-resistant chronic rhinosinusitis who were candidates for FESS. Preoperative CBCT scans were obtained before patients underwent FESS. The agreement between the CBCT findings and those of FESS was determined using the kappa correlation coefficient. The frequency of anatomical variations of the paranasal sinuses was also evaluated on CBCT scans. Results: Significant agreement existed between pathological findings on CBCT scans and those of FESS, such that the kappa correlation coefficient was 1 for mucosal thickening, 0.644 for nasal deviation, 0.750 for concha bullosa, 0.918 for nasal polyp, 0.935 for ostiomeatal complex (OMC) obstruction, and 0.552 for infundibulum thickening. Furthermore, 95.9% of patients had 1 or more and 79.6% had 2 or more anatomical variations, of which nasal deviation was the most common (67.3%). Conclusion: Considering the significant agreement between the findings of CBCT and FESS for the detection of pathological changes in the paranasal sinuses, CBCT can be used prior to FESS to detect chronic rhinosinusitis and to assess anatomical variations of the OMC.

• 대한치과교정학회지
• /
• 제51권2호
• /
• pp.86-94
• /
• 2021

Objective: This study aimed to investigate the effect of micro-osteoperforations (MOPs) on external apical root resorption (EARR) during the initial orthodontic alignment phase of maxillary anterior crowding. Methods: Thirty patients (25 females, 5 males; mean age, 22.66 ± 3.27 years) who presented with moderate crowding of the upper labial segment and underwent extraction-based fixed appliance treatment were recruited. They were randomly allocated to receive adjunctive therapy with MOPs (n = 15) or treatment with fixed appliances only (control group; n = 15). EARR was measured from long-cone periapical radiographs taken at the start and the sixth month of treatment. A correction factor for the enlargement difference was used to calculate EARR. Data were analyzed with descriptive statistics and repeated-measures analysis of variance. Results: The mean root lengths of 168 teeth were measured and showed no statistically significant difference (p > 0.05) after six months of fixed appliance treatment in the MOP (mean difference [MD] = 0.13 mm; 95% confidence interval [CI] = -0.10-0.35) and control group (MD = 0.14 mm; 95% CI = -0.10-0.37). Most of the roots in the MOP and control groups (42.86% and 52.38%, respectively) showed only mild resorption. Less than 8% of the roots in both groups (7.14% in the MOP group and 4.76% in the control group) showed moderate resorption. Conclusions: Acceleration of orthodontic tooth movement with adjunctive MOPs therapy during the alignment phase does not exacerbate EARR in patients with moderate crowding of the upper labial segment in comparison with controls.