• Journal of the Korean Graphic Arts Communication Society
• /
• v.15 no.1
• /
• pp.71-83
• /
• 1997

In recent years, various kinds of organic photoreceptors have been used for copy machines based on electrophotography. Most of them are constructed into layered devices in which a photogeneration layer is separated from a charge transport layer. They are usually used with application of negative charges. Organic pigment have received considerable attention with phthalocyanine, squaraine, and azo compounds being used to construct zerograpgic photoreceptors with enhanced long wavelength sensitivity, residual potential and zerograpgic gain of squaraine photoconductor were measured from the photoinduced discharge curve. Most of synthesized squaraine derivative couldn`t use for CGM(charge generation material), but it knew that a part of one was able to use it within the possibility. A few appliance is used it know about dependence on CTM(charge transport material) of squaraine derivative. It could know that experiment`s result is 2.5-bis(4-N-N`-diethylaminophenyl)-1,3,4-oxadiazole(OXD) is the bestproduct.

• Journal of Conservation Science
• /
• v.29 no.4
• /
• pp.379-388
• /
• 2013

Damaged the Jeoguibon (patterns of the Queen's ceremonial robe) was found during repair work of Daejojeon, Changdeok Palace in 2011. Analytical study on seven colors painted in the patterns has been conducted by P-XRF and Micro-XRD analysis. The result displays that red lead, ultramarine blue, conichalcite or mixed pigment of emerald green and barium white, orpiment and white lead had been used on the patterns. Comparison of the pigments used for the Pyeseulbon (patterns of the Queen's belt ornament covering knees in the front) housed in National Museum of Korea has revealed that not only red lead but also cinnabar and organic pigment had been used in the Jeoguibon and the Pyeseulbon housed in National Museum of Korea. In addition the same pigments has been examined in green and yellow parts of both the Jeoguibon in Daejojeon and the Pyeseulbon housed in National Museum of Korea. The result has shown that western's synthetic green pigment such as emerald green was introduced and used in 1920's. The scientific result from this study expects to be used as useful referencing data for the comparative understanding on pigments used in palace during the 20th century.

• Journal of Conservation Science
• /
• v.35 no.4
• /
• pp.345-361
• /
• 2019

This study demonstrates the application of hyperspectral analysis as a pigment identification method for modern and contemporary Dancheong, the polychrome surface on traditional Korean wooden buildings. In particular, green pigments are the focus of this study. Green pigments in modern and contemporary Dancheong have the largest variation of materials and show a noticeable timeline. Thus, they are most suitable for estimating the manufacture or restoration period of Dancheong. Hyperspectral analysis is a noncontact, long-distance measurement technique that has advantages in the field of Dancheong analysis. It is capable of identifying both organic and inorganic pigments, unlike existing analysis methods. For this experiment, green and other pigments used during the modern and contemporary era were selected and made into painted samples under various mixing conditions that reflect their actual uses. Through hyperspectral analysis, their reflectance characteristics were observed, which enables the derivation of four main features that can distinguish the type of pigments used for color mixture. Based on these, a pigment identification system was designed in the form of a flowchart, and its utility was confirmed through site application. Despite some limitations at this stage, the technique can be complemented by considering proper measurement methods or the continuous accumulation of samples and data. If a database on various materials, mixing ratios, painting techniques, and other external interference factors is developed in future research, it would provide the foundation for a faster and safer analysis environment of Dancheong sites.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.857-864
• /
• 2018

Demand for developing artificial green pearl that meets the needs of modern people has been increasing. In this paper, eco-friendly inorganic pearlescent pigment was used instead of organic pigment and urethane resin was substituted for nitrocellulose which has been used as main materials in previous preparation method, increasing gloss from 73.4% to 86.7%. Urethane was coated on substrate before finishing with CVD, resulting high gloss of 96%. Colorimeteric analysis shows that a* and b* of CIE value was changed from +37.7 and +24.5 to +31.9 and +14.2 respectively because of CVD finishing, obtaining colorful, high gloss and durable artificial pearl. Quality and toxicity of samples was established by chemical resistance, glossiness, colorimeter, surface roughness, wear resistance, content of heavy-metal, and salt water test.

• Journal of Conservation Science
• /
• v.30 no.1
• /
• pp.13-25
• /
• 2014

This study interpreted the chemicals of the pigments and the coloring techniques employed on Youngsan Ritual Ceremony Buddhist Painting through a nondestructive analysis method and a microscopic observation. Based on the interpretation, this study closely examined the chemical properties of the names of the coloring materials specified on the ceremonial writing of the Buddhist painting. It is estimated that lead white was used for the white pigments, orpiment and organic pigment for the yellow pigment, cinnabar/vermilion, minium, red ochre, and red dyes for the red pigments, malachite or atacamite for the green pigments, azurite and indigo for the blue pigments, and ink stick for the black pigments. The pigment names specified on the ceremonial writing are juhong, jungcheong, hayeop, whangdan, and whanggeum, and it was verified that juhong is cinnabar or vermilion, jungcheong is azurite, hayeop is malachite or atacamite, whangdan is minium, and whanggeum is a gold foil.

• The Korean Journal of Malacology
• /
• v.29 no.4
• /
• pp.291-301
• /
• 2013

This study researched and compared the sedimentation environment and photosynthetic pigments at Gomso (GS) -bay, Yoja (YJ) -bay and KangJin (KJ) -bay in May, 2012. It was shown that KJ-bay consist of C (clay) and M (mud), and GS-bay consists of Zs (silty sand) and Sz (sandy silt). Averagely, IL of YJ-bay was 4.98%, KJ-bay 6.10%, and GS-bay 1.45%. As for COD concentration, there were no places that exceeded Japanese sediment contamination standard 20 mg/g-dry. As for AVS concentration, in case of KJ-bay, two places exceeded Japanese sediment contamination standard 0.2 mg/g-dry. If we look into the average C/N ratio of bays, YJ-bay showed 8.50, KJ-bay 6.60, and GS-bay 5.52, thus all of them showed the characteristic of oceanic origin. As for the plankton make-up classified by photosynthetic pigments, diatom was dominant, and both ratios of pigment and C/chlorophyll. a showed the relatively lower distribution at GS-bay than at KJ-bay and YJ-bay. It is judged that this is related to the characteristic of flow-in, and it implies that predation process and decomposition by organic matters actively occurs at YJ-bay and KJ-bay.

• Textile Coloration and Finishing
• /
• v.28 no.4
• /
• pp.280-289
• /
• 2016

Silica microgel was prepared by sol-gel process and then functional groups, epoxy group and ethoxy group, were introduced on the particle by coupling treatment with 3-glysidoxypropyltrimethoxysilane. The functional silica microgel(functional SiGel) formation was identified using FT-IR spectrometry. Phase stability for DMF solution of functional SiGel, PU resin and pigment was evaluated by Turbiscan Lab. And physical properties of artificial suede including hand values, morphology and dyeing fastness were investigated. The mean particle size and the specific surface area of the functional SiGel were $0.77{\mu}m$ and $380m^2/g$. Mixture containing the functional SiGel, PU resin and pigment was more stable than the functional SiGel-free mixed solution. Artificial suede prepared by the functional SiGel had appearance and feeling close to natural suede. The migration fastness, the solvent wicking fastness and rubbing fastness of the artificial suede were enhanced to 4~5 grades, 4~5 grades and 3~4 grades, respectively.

• Korean Journal of Materials Research
• /
• v.27 no.11
• /
• pp.583-589
• /
• 2017

Ceramic ink-jet printing has become a widespread technology in ceramic tile and ceramicware industries, due to its capability of manufacturing products on demand with various designs. Generally, thermally stable ceramic inks of digital primary colors(cyan, magenta, yellow, black) are required for ink-jet printing of full color image on ceramic tile. Here, we synthesized an aqueous glass-ceramic ink, which is free of Volatile organic compound(VOC) evolution, and investigated its inkjet printability. $CoAl_2O_4$ inorganic pigment and glass frit were dispersed in aqueous solution, and rheological behavior was optimized. The formulated glass-ceramic ink was suitably jetted as single sphere-shaped droplets without satellite drops. After ink-jet printing and firing processes, the printed glass-ceramic ink pattern on glazed ceramic tile was stably maintained without ink spreading phenomena and showed an improved scratch resistance.

• 보존과학연구
• /
• s.29
• /
• pp.199-220
• /
• 2008

Hobun(Oyster shell White) is a traditional material used as extender and white pigment from ancient times. The production method of it, however, has been discontinued. We have studied the traditional production method of Hobun by weathering oyster shell, which is one of the traditional ways for preparing Hobun. Reproduction study of manufacturing method of the discontinued traditional material is an important accomplishment of our research. Also this study provides solid background knowledge to stabilize the production and supply of Hobun for the cultural asset repairing materials. The result can be summarized as follows: The production process of Hobun by weathering method takes 5 steps - (1) weathering shells ${\rightarrow}$ (2) washing ${\rightarrow}$ (3) pulverization ${\rightarrow}$ (4) separating fine powder by submerging in water ${\rightarrow}$ (5) drying. The major aim in step (1) is to eliminate organic impurities. In the step (4), the fine particles smaller than $25{\mu}m$ are separated by extracting the supernatant from stirred suspension after heavy particles are submerged. Also, the soluble inorganic impurities can be eliminated through the powder submerge in 15 times water and stirring the suspension 6 hours and changing the water 3~4 times. The final products have high quality with 94.03, 0.52, 2.05 for L, a, b, less than $25{\mu}m$ particle size, fine resistance for discoloration by light and environmental pollution and good workability.

• Journal of Food Hygiene and Safety
• /
• v.6 no.3
• /
• pp.165-169
• /
• 1991

The effect of gamma irradiation on physico-chemical properties of salted sea mustard (Undaria pinnatifida) was investigated. Chlorophyll and carotenoid pigment of salted sea mustard were partially decreased by irradiation. However there was no significant difference in the retention rate of pigment between control and 2 kGy-irradiated samples after six months of storage at around $10^{\circ}C$, ranging values of 74 to 77% in chlorophyll and 54 to 56% in carotenoid. Total organic acids and volatile acids associated with the organoleptic quality of sea mustard increased in the samples of lower salt concentrations and of higher storage temperatures. The softening of sample tissue by irradiation was shown to be correlated with the extraction properties of alginic acid.