• Korean Journal of Remote Sensing
• /
• v.29 no.6
• /
• pp.595-600
• /
• 2013

In order to spatially interpolate the near-surface temperature (Ta) values, satellite and reanalysis methods were used from previous studies. Accuracy of reanalysis Ta was generally better than that of satellite-based Ta, but spatial resolution of reanalysis Ta was large to use at local scale studies. Our purpose is to evaluate accuracy of reanalysis Ta and satellite-based Ta according to elevation from April 2011 to March 2012 in Northeast Asia that includes various topographic features. In this study, we used reanalysis data that is ERA-Interim produced by European Centre for Medium-Range Weather Forecasts (ECMWF), and estimated satellite-based Ta using Digital Elevation Meter (DEM), Normalized Difference Vegetation Index (NDVI), difference between brightness temperature of $11{\mu}m$ and $12{\mu}m$, and Land Surface Temperature (LST) data. The DEM data was used as auxiliary data, and observed Ta at 470 meteorological stations was used in order to evaluate accuracy. We confirmed that the accuracy of satellite-based Ta was less accurate than that of ERA-Interim Ta for total data. Results of analyzing according to elevation that was divided nine cases, ERA-Interim Ta showed higher accurate than satellite-based Ta at the low elevation (less than 500 m). However, satellite-based Ta was more accurate than ERA-Interim Ta at the higher elevation from 500 to 3500 m. Also, the width of the upper and lower quartile appeared largely from 2500 to 3500 m. It is clear from these results that ERA-Interim Ta do not consider elevation because of large spatial resolution. Therefore, satellite-based Ta was more effective than ERA-Interim Ta in the regions that is range from 500 m to 3500 m, and satellite-based Ta was recommended at a region of above 2500 m.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.1
• /
• pp.41-46
• /
• 2011

In this paper, we experimentally investigate factors that decrease in noise of a industrial take-out robot at driving state. For this, we analyse change in the noise of the take-out robot with gear machining accuracy and clearance. In order to calculate the noise related to gear machining accuracy that is based upon the Japanese Industrial Standard(JIS), we equally increase motor speed from 0 rpm to 1250 rpm. In addition, to investigate influence of clearance on noise, we evenly change clearance from 0.5 mm to 1.2 mm. These experiments show that clearance is more effective factor than gear machining accuracy to reduce the noise of the take-out robot.

• Korean Journal of Geomatics
• /
• v.3 no.2
• /
• pp.107-114
• /
• 2004

The National Geographic Information Institute (NGII) in korea, through the National Geographic Information System (NGIS) Program, has prepared to generate and disseminate digital elevation data for Korea. This is a pilot research to propose a policy for production, maintenance, and supply of Korea Digital Elevation Data(KDED). Customer demands for accuracy and resolution of DEM was surveyed through a questionnaire. In order to investigate the quality, the technical efficiency and the production cost, a tentative DEM in a small test site was generated based on digital topographic maps (original paper map scale 1:5,000), analytical plotter, and LIDAR. The Accuracy standard for KDED was derived based on source data generation methods. As a result of this research, a uniformly spaced grid model was recommended for KDED. Its preferable grid space is 5m in urban areas and its vicinity, and 10m in field and mountainous area. LIDAR has been valuated as a proper KDED generation method fulfilling customers' demands for the accuracy.

• Journal of Mechanical Science and Technology
• /
• v.20 no.1
• /
• pp.94-109
• /
• 2006

An improved meshfree method called the Petrov-Galerkin natural element (PG-NE) method is introduced in order to secure the numerical integration accuracy. As in the Bubnov-Galerkin natural element (BG-NE) method, we use Laplace interpolation function for the trial basis function and Delaunay triangles to define a regular integration background mesh. But, unlike the BG-NE method, the test basis function is differently chosen, based on the Petrov-Galerkin concept, such that its support coincides exactly with a regular integration region in background mesh. Illustrative numerical experiments verify that the present method successfully prevents the numerical accuracy deterioration stemming from the numerical integration error.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.2
• /
• pp.291-298
• /
• 2022

Recently developed drones are inexpensive and very convenient to operate. As a result, the production and utilization of spatial information using drones are increasing. However, most drones acquire images with a low-cost global navigation satellite system (GNSS) and an inertial measurement unit (IMU). Accordingly, the accuracy of the initial location and rotation angle elements of the image is low. In addition, because these drones are small and light, they can be greatly affected by wind, making it difficult to maintain a certain overlap, which degrades the positioning accuracy. Therefore, in this study, images are taken at different times in order to analyze the positioning accuracy according to changes in certain exterior orientation parameters. To do this, image processing was performed with Pix4D Mapper and the accuracy of the results was analyzed. In order to analyze the variation of the accuracy according to the exterior orientation parameters in detail, the exterior orientation parameters of the first processing result were used as meta-data for the second processing. Subsequently, the amount of change in the exterior orientation parameters was analyzed by in a strip-by-strip manner. As a result, it was proved that the changes of the Omega and Phi values among the rotation elements were related to a decrease in the height accuracy, while changes in Kappa were linked to the horizontal accuracy.

• Journal of Radiation Protection and Research
• /
• v.46 no.4
• /
• pp.204-212
• /
• 2021

Background: Identification of radioisotopes for plastic scintillation detectors is challenging because their spectra have poor energy resolutions and lack photo peaks. To overcome this weakness, many researchers have conducted radioisotope identification studies using machine learning algorithms; however, the effect of data normalization on radioisotope identification has not been addressed yet. Furthermore, studies on machine learning-based radioisotope identifiers for plastic scintillation detectors are limited. Materials and Methods: In this study, machine learning-based radioisotope identifiers were implemented, and their performances according to data normalization methods were compared. Eight classes of radioisotopes consisting of combinations of ²²Na, ⁶⁰Co, and ¹³⁷Cs, and the background, were defined. The training set was generated by the random sampling technique based on probabilistic density functions acquired by experiments and simulations, and test set was acquired by experiments. Support vector machine (SVM), artificial neural network (ANN), and convolutional neural network (CNN) were implemented as radioisotope identifiers with six data normalization methods, and trained using the generated training set. Results and Discussion: The implemented identifiers were evaluated by test sets acquired by experiments with and without gain shifts to confirm the robustness of the identifiers against the gain shift effect. Among the three machine learning-based radioisotope identifiers, prediction accuracy followed the order SVM > ANN > CNN, while the training time followed the order SVM > ANN > CNN. Conclusion: The prediction accuracy for the combined test sets was highest with the SVM. The CNN exhibited a minimum variation in prediction accuracy for each class, even though it had the lowest prediction accuracy for the combined test sets among three identifiers. The SVM exhibited the highest prediction accuracy for the combined test sets, and its training time was the shortest among three identifiers.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.7 no.2
• /
• pp.75-81
• /
• 2003

Compact schemes are shown to be effective for a class of problems including convection-diffusion equations when combined with multigrid algorithms [7, 8] and V-cycle convergence is proved[5]. We apply the multigrid algorithm for an semianalytic finite difference scheme, which is desinged to preserve high order accuracy despite of singularities.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.55.3-55.3
• /
• 2017

We present the preliminary result of our Lagrangian perturbation theory for the large-scale structure formation, in the presence of the cold dark matter (CDM) and the baryonic fluid. In the linear order, two mutually independent pseudo-particles can describe the evolution of density fluctuations and the accuracy of the calculation is better than the 4-mode (growing, decaying, streaming, compensated) Eulerian linear perturbation theory. In the $2^{nd}$ order, the separability of pseudo-particles is not as straightforward as in the linear order, and the related difficulty in developing the $2^{nd}$ order theory will also be presented.

• The Journal of Information Systems
• /
• v.30 no.4
• /
• pp.21-42
• /
• 2021

Purpose In order for companies to continue to grow, they should properly manage human resources, which are the core of corporate competitiveness. Employee turnover means the loss of talent in the workforce. When an employee voluntarily leaves his or her company, it will lose hiring and training cost and lead to the withdrawal of key personnel and new costs to train a new employee. From an employee's viewpoint, moving to another company is also risky because it can be time consuming and costly. Therefore, in order to reduce the social and economic costs caused by employee turnover, it is necessary to accurately predict employee turnover intention, identify the factors affecting employee turnover, and manage them appropriately in the company. Design/methodology/approach Prior studies have mainly used logistic regression and decision trees, which have explanatory power but poor predictive accuracy. In order to develop a more accurate prediction model, XGBoost is proposed as the classification technique. Then, to compensate for the lack of explainability, SHAP, one of the XAI techniques, is applied. As a result, the prediction accuracy of the proposed model is improved compared to the conventional methods such as LOGIT and Decision Trees. By applying SHAP to the proposed model, the factors affecting the overall employee turnover intention as well as a specific sample's turnover intention are identified. Findings Experimental results show that the prediction accuracy of XGBoost is superior to that of logistic regression and decision trees. Using SHAP, we find that jobseeking, annuity, eng_test, comm_temp, seti_dev, seti_money, equl_ablt, and sati_safe significantly affect overall employee turnover intention. In addition, it is confirmed that the factors affecting an individual's turnover intention are more diverse. Our research findings imply that companies should adopt a personalized approach for each employee in order to effectively prevent his or her turnover.

• The Journal of Fisheries Business Administration
• /
• v.41 no.1
• /
• pp.25-52
• /
• 2010

The purpose of this paper is to suggest major strategies and necessary new projects for the medium- and long-term development of the Korean Fisheries Outlook Project. To suggest the Korean Fisheries Outlook Center with the above purpose, this paper employs Analytic Hierarchy Process analysis based on surveys obtained by special groups related with the KFOP. The survey is broadly composed of two goals; the medium- and long-term development directions and setting up of new furtherance projects. Each goal has upper and lower strategies respectively. The first goal, the medium- and long-term development directions, has four factors as upper strategies. The upper strategies are composed of accuracy, efficiency, timeliness, and political effectiveness of the fisheries outlook information. In addition, each upper strategy has three lower strategies respectively. For example, accuracy of the fisheries outlook information includes strength of data collection function, strength of satellite photography function, and strength of data analysis function. The second goal, setting up of new furtherance projects, has three factors as upper strategies. The upper strategies consist of accuracy promotion of outlook information using high-technique, field expansion of outlook species, and strength of analyzing function on oversea fisheries information. Each upper strategy has three lower strategies respectively. For instant, accuracy promotion of outlook information using high-technique has strength of information analysis function covered from production to consumption, strength of satellite information function, and structure of forecasting model on demand and supply by outlook species. The above upper and lower strategies were analytically drawn out through insightful interviews with special groups such as officials of the government, presidents of the producer and distributor groups, and researchers of the Korea Maritime Institute and other research institutes. As a result of AHP analysis, first, priorities of upper strategies with the medium- and long-term development directions are analyzed as accuracy, timeliness, political effectiveness, and efficiency in order. Also, priorities of all lower strategies reflecting priorities of upper strategies are examined as includes strength of data collection function on the fisheries outlook information, delivery of rapid information on outlook products for all people interested, strength of data analysis function on fisheries outlook information, strength of consumption outlook function on fish products, and strength of early warning system for domestic fish products in order. Second, priorities of upper strategies with the setting up of new furtherance projects are analyzed as accuracy promotion of outlook information using high-technique, field expansion of outlook species, and strength of analysis function on oversea fisheries information in order. In addition, priorities of all lower strategies reflecting priorities of upper strategies are examined as building up of forecasting model on demand and supply by outlook species, strength of information analysis function covering all steps from production to consumption, expansion of consumption outlook for consumers, strength of movement analysis function of oversea farming industry, and outlook expansion of farming species.