• Journal of the Korea Fashion and Costume Design Association
• /
• v.24 no.4
• /
• pp.87-99
• /
• 2022

The purpose of this study is to develop machine embroidery textile designs for each technique that can be expressed using a single-headed computer embroidery sewing machine through a machine embroidery CAD system. For research, embroidery CAD utilized the Artistic digitizer, and the guillotine computer-mechanical magnetization machine used ELNA. The design concept was limited to portraits and relics of independence activists in six memorial halls built in Korea. The results of this study are as follows. First, it was found that the machine embroidery texture, which could only be produced by industries in the past, can be expand in the infinite creative embroidery design area by enabling the digitalization of motif images and the simulation of machine embroidery techniques through various layout options. Second, in the development of machine embroidery textures, it was found that the setting of the width, height, axis ratio, stitch, object, path, length, density, layer order, etc. in embroidery CAD is a very important part of determining the completeness of the embroidery results. Third, mechanical embroidery textile designs, which can be represented by single-head computer machine embroidery machine were able to show colorful embroidery results that differs from the original image by using seven main techniques and five deep technique alone or in combination, according to the designer's intention.

• Journal of the Korea Safety Management & Science
• /
• v.26 no.2
• /
• pp.93-105
• /
• 2024

In this study, based on previous research on personal broadcasting, we indirectly measured content quality, YouTuber attributes, user satisfaction, and behavioral intention, which are latent variables that cannot be directly measured, as measurement variables, and then measured theoretically between the latent variables. In order to analyze the causal relationship, we used a structural equation model to determine to what extent the content quality of the YouTube mukbang channel and the YouTuber's attributes influence behavioral intentions such as purchase, recommendation, and continued use according to viewers' satisfaction with use. We intend to analyze and verify the relationship between related variables. The research results are as follows. First, the value, relevance, timeliness, completeness, and data quantity of content quality were found to have no significant impact on user satisfaction. Second, the trustworthiness, expertise, attractiveness, and intimacy of YouTuber attributes were found to have a significant impact on user satisfaction, but the similarity of YouTuber attributes did not have a significant impact on usage. Third, user satisfaction was found to have a significant impact on behavioral intentions and purchase intentions. However, user satisfaction was not found to have a direct significant impact on recommendation intentions or continued usage intentions.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.3
• /
• pp.287-298
• /
• 2013

Objectives: Workers who use chemicals are exposed to safety accidents and occupational diseases. Employers are required to provide workers with Material Safety Data Sheets (MSDSs) in order to prevent accidents and diseases related to chemicals. Thus, it is very important to offer reliable MSDSs. In this paper, we assessed the reliability of MSDSs for chemicals including formaldehyde. Methods: To evaluate MSDS reliability, we collected 14 MSDSs and bulk samples from the chemical industry. MSDS reliability was evaluated by the completeness of details. In order to evaluate the adequacy of the formaldehyde contents in a mixture, bulk samples were collected and analyzed by HPLC. The result of Globally Harmonized System (GHS) classification was confirmed by identifying physical chemical properties, toxicology information and ecological information. Results: The result of the evaluation of 14 MSDSs showed 76.29% average reliability on each item, especially 53.9% average appropriate rate on hazard risk classification. No chemicals failed to match between the content (%) in MSDSs and the result of analysis. Conclusions: To elevate MSDSs reliability, the certified education of MSDS drafters and reorganization of the MSDS circulation system is required.

• Journal of Korea Multimedia Society
• /
• v.23 no.7
• /
• pp.850-861
• /
• 2020

Hangul is a language that is composed of initial, medial, and final syllables. It has 11,172 characters. For this reason, the current method of designing all the characters by hand is very expensive and time-consuming. In order to solve the problem, this paper proposes an automatic Hangul font generation system and evaluates the standards for mapping Hangul characters to produce an effective automated Hangul font generation system. The system was implemented using character generation engine based on deep learning CycleGAN. In order to evaluate the criteria when mapping characters in pairs, each criterion was designed based on Hangul structure and character shape, and the quality of the generated characters was evaluated. As a result of the evaluation, the standards designed based on the Hangul structure did not affect the quality of the automated Hangul font generation system. On the other hand, when tried with similar characters, the standards made based on the shape of Hangul characters produced better quality characters than when tried with less similar characters. As a result, it is better to generate automated Hangul font by designing a learning method based on mapping characters in pairs that have similar character shapes.

• Design & Manufacturing
• /
• v.12 no.2
• /
• pp.27-33
• /
• 2018

Korea's automobile industry, which has grown rapidly to become the world's fifth-largest automobile producer, To cope with environmental pollution and energy problems in order to prevail competitive edge in global market We are investing a lot of research personnel and costs. Among them, for realizing alternative light weight It is a part of the automobile module system that has achieved the technological development before the breakthrough in the injection molding process in the press process. Door module PNL was the subject of research. The door module PNL is expected to cause warpage before the mold production due to the thin and flat product characteristics and fiber orientation characteristic of the material. In this paper, CAE analysis and reverse correction tool Design. CAE analysis to obtain the results of weld line position, bending position and deformation value Through the correction tool, think3, the original product was modified before the mold production to improve the completeness of the parts. In fiber orientation, the position and size of the cooling channel in the mold, the position and size of the gate, Temperature, pressure, time, and work environment. Compared with the result of CAE analysis, the product that was reverse-corrected by Think3 was manufactured, and injection molding was performed. Injection molding products were tested 24 hours later. 3.5 mm to 7.0 mm, and under the fixed condition, the deviation was from 1.1 mm to 1.5 mm. Unlike the CAE analysis, the deviation of the actual injection pressure and the cooling temperature, the fiber orientation of the material, In order to solve this problem, it is necessary to compare the injection conditions with the database, I knew I had to catch the standard.

• Journal of Preventive Medicine and Public Health
• /
• v.43 no.3
• /
• pp.257-264
• /
• 2010

Objectives: An accurate estimation of cancer patients is the basis of epidemiological studies and health services. However in Korea, cancer patients visiting out-patient clinics are usually ruled out of such studies and so these studies are suspected of underestimating the cancer patient population. The purpose of this study is to construct a more complete, hospital-based cancer patient registry using multiple sources of medical information. Methods: We constructed a cancer patient detection algorithm using records from various sources that were obtained from both the in-patients and out-patients seen at Asan Medical Center (AMC) for any reason. The medical data from the potentially incident cancer patients was reviewed four months after first being detected by the algorithm to determine whether these patients actually did or did not have cancer. Results: Besides the traditional practice of reviewing the charts of in-patients upon their discharge, five more sources of information were added for this algorithm, i.e., pathology reports, the national severe disease registry, the reason for treatment, prescriptions of chemotherapeutic agents and radiation therapy reports. The constructed algorithm was observed to have a PPV of 87.04%. Compared to the results of traditional practice, 36.8% of registry failures were avoided using the AMC algorithm. Conclusions: To minimize loss in the cancer registry, various data sources should be utilized, and the AMC algorithm can be a successful model for this. Further research will be required in order to apply novel and innovative technology to the electronic medical records system in order to generate new signals from data that has not been previously used.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.351-356
• /
• 2022

Among the path planning methods used to generate the ship's path, the graph search-based method is widely used because it has the advantage of its completeness, optimality. In order to apply the graph-based search method to the berthing path plan, the deviation from the path must be minimized. Path following suitability should be considered essential, since path deviation during berthing can lead to collisions with berthing facilities. However, existing studies of graph search-based berthing path planning are dangerous for application to real-world navigation environments because they produce results with a course change just before berthing. Therefore, in this paper, we develop a cost function suitable for path following, and propose a 3D A* algorithm that applies it. In addition, in order to evaluate the suitability for the actual operating environment, the results of the path generation of the algorithm are compared with the trajectory of the data collected by manned operations.

• The Journal of Engineering Research
• /
• v.6 no.2
• /
• pp.11-22
• /
• 2004

A distributed constraint satisfaction problem (distributed CSP) is a constraint satisfaction problem(CSP) in which variables and constraints are distributed among multiple automated agents. ACSP is a problem to find a consistent assignment of values to variables. Even though the definition of a CSP is very simple, a surprisingly wide variety of AI problems can be formalized as CSPs. Similarly, various application problems in DAI (Distributed AI) that are concerned with finding a consistent combination of agent actions can be formalized as distributed CAPs. In recent years, many new backtracking algorithms for solving distributed CSPs have been proposed. But most of all, they have common drawbacks that the algorithm assumes the priority of agents is static. In this thesis, we establish a basic algorithm for solving distributed CSPs called dynamic priority search algorithm that is more efficient than common backtracking algorithms in which the priority order is static. In this algorithm, agents act asynchronously and concurrently based on their local knowledge without any global control, and have a flexible organization, in which the hierarchical order is changed dynamically, while the completeness of the algorithm is guaranteed. And we showed that the dynamic priority search algorithm can solve various problems, such as the distributed 200-queens problem, the distributed graph-coloring problem that common backtracking algorithm fails to solve within a reasonable amount of time. The experimental results on example problems show that this algorithm is by far more efficient than the backtracking algorithm, in which the priority order is static. The priority order represents a hierarchy of agent authority, i.e., the priority of decision-making. Therefore, these results imply that a flexible agent organization, in which the hierarchical order is changed dynamically, actually performs better than an organization in which the hierarchical order is static and rigid. Furthermore, we describe that the agent can be available to hold multiple variables in the searching scheme.

• Journal of Digital Convergence
• /
• v.11 no.2
• /
• pp.221-228
• /
• 2013

A number of research studies focus on the efficacy of using such as scenario based learning. However, desirable methods have not been introduced to assess the scenario based learning. This article is to suggest a fuzzy logic based framework for scenario base learning in which more reasonable learning effects are measured. It can be solved uncertain problems of linguistic variables. Also, we suggest three measures of accuracy, comprehensibility and completeness in order to evaluate accurate effects of scenario based learning. This assessment provides the scenario to the learner in which the scenario is presented in an authentic context, and enable the learner to reach an outcome through an adequate sequence and choices. This approach enables the system to present new scenarios and outcomes based on what a user selects. In particular, the application of fuzzy logic in scenario based learning can be easily pursued certain successful path or wrong path all the way through to reach major outcome in real situation.

• Journal of Gastric Cancer
• /
• v.14 no.2
• /
• pp.117-122
• /
• 2014

Purpose: Cytoreductive surgery (CRS) and hyperthermic intraperitoneal chemotherapy (HIPEC) have been shown to improve survival in select patients with gastric cancer and peritoneal metastases. It remains unclear, however, whether this multimodal treatment protocol is also beneficial for signet-ring cell gastric cancer (SRC) patients with peritoneal metastases. Materials and Methods: Clinical data of patients scheduled for upfront systemic chemotherapy consisting of 5-FU (2,600 $mg/m^2$), folinic acid (200 $mg/m^2$), docetaxel (50 $mg/m^2$), and oxaliplatin (85 $mg/m^2$) followed by CRS and HIPEC using cisplatin (50 $mg/m^2$) at the Comprehensive Cancer Center, University Hospital T$\ddot{u}$bingen, Germany were retrospectively analyzed. Results: Eighteen consecutive patients for whom irresectability has been ruled out by a computed tomography scan were enrolled. However, complete cytoreduction could only be achieved in 72% of patients. When categorizing patients with respect to the completeness of cytoreduction, we found no difference between both groups considering tumor- or patient-related factors. The overall complication rate following complete cytoreduction and HIPEC was 46%. Within a median follow-up of 6.6 (0.5~31) months, the median survival for CRS and HIPEC patients was 8.9 months as opposed to 1.1 months for patients where complete cytoreduction could not be achieved. Following complete cytoreduction and HIPEC, progression-free survival was 6.2 months. Conclusions: In SRC with peritoneal metastases, the prognosis appears to remain poor irrespective of complete CRS and HIPEC. Moreover, complete cytoreduction could not be achieved in a considerable percentage of patients. In SRC, CRS and HIPEC should be restricted to highly selective patients in order to avoid exploratory laparotomy.