• Journal of Chest Surgery
• /
• v.20 no.4
• /
• pp.655-658
• /
• 1987

Aortic annulus size was measured by two-dimensional echocardiography [2DE] in 29 patients undergoing aortic valve replacement or double valve replacement in order to predict prosthetic aortic valve size. Fifteen patients had aortic stenoinsufficiency, eleven had aortic insufficiency, and three had aortic stenosis. 2DE measurements of aortic annulus diameter, as determined from the parasternal long-axis view, demonstrated a high correlation with actual prosthetic valve size implanted at surgery [r=0.85, p<0.05]. 2DE exactly predicted actual prosthetic valve size in 8 of 29 patients [27.6%], was within 1mm of prosthetic valve size in 11 of 29 patients [37.9%], was within 2mm of prosthetic valve size in 8 of 29 patients, and was within 3mm of prosthetic valve size in 2 patients.

• Fashion & Textile Research Journal
• /
• v.7 no.4
• /
• pp.426-432
• /
• 2005

The health of feet is connected with individual's health and affects a man's activity. Shoes need to be designed to protect feet and to absorb the impact of land. Thus, design, comfort and economical efficiency are important factors of shoes. Consumers can choose suitable shoes for their feet in off-line shopping. However, in on-line shopping, because they can not wear shoes, compare to the off-line shopping, there are many problems in internet shopping. First, consumers can get limited information of shoes because they must search information of purchase without other's help. Second, because consumers can not get important information such as design, size and a comfort of wearing, they can not make a careful decision. Above these, the solution of user-oriented internet shopping is development of new type of prototype which is accessible to user and to offer visual information through 3D-virtual reality. The purpose of this study is to develpoment of shoes easy-order prototype so to reduce of internet shopping risk and offer to shopping convenience. Contents of the new prototype are as follows; 1. Consumers can print out a foot shaped plane figure and compare it to their foot. If the size of printed sheet is not proper, consumers can choose another size. Through this step, they can get their own size. 2. In 3D-virtual reality, consumers can get a various visual information. So they feel wearing comfort indirectly. It is expected that the result of this study would be an important case study to develop of shoes' easy-order prototype for a disabled person.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2005.10a
• /
• pp.52-55
• /
• 2005

The purpose of this study is to analyze space size in the apartment unit plan towards optimal space configuration in order to offer the helpful information to housing designers. For this, we analyzed 432 samples using the Excel 2003 program. The major results of this study are as follows. 1) as the unit size gets bigger, the proportion of the usable area is increased. 2) as the unit size gets bigger, the number of spaces is increased and spaces are divided although they have the same function. 3) living room has the highest proportion in each unit, master room and kitchen are followed. 4) the proportion of living room, kitchen and entrance hall is not fluctuated while that of bedroom and bathroom is decreased. 5) there is a big gap between maximum size and minimum size of kitchen, entrance hall, bathroom and dressing room.

• Structural Engineering and Mechanics
• /
• v.25 no.6
• /
• pp.691-716
• /
• 2007

The purpose of the present work is to establish a method for predicting the location and depth of a crack in a circular cross section beam by only considering the frequencies of the cracked beam. An accurate knowledge of the material properties is not required. The crack location and size is identified by finding the point of intersection of pulsation ratio contour lines of lower vertical and horizontal modes. This process is presented and numerically validated in the case of a simply supported beam with various crack locations and sizes. If the beam has structural symmetry, the identification of crack location is performed by adding an off-center placed mass to the simply supported beam. In order to avoid worse diagnostic, it was demonstrated that a robust identification of crack size and location is possible if two tests are undertaken by adding the mass at the left and then right end of the simply supported beam. Finally, the pulsation ratio contour lines method is generalized in order to be extended to the case of rectangular cross section beams or more complex structures.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2001.12a
• /
• pp.87-90
• /
• 2001

This paper is concerned with the estimation of a wafer part in grasping system. The estimation of a wafer size in grasping system is very important because a wafer must be placed in accurate position. The accurate information of a wafer size should be forward to Robot in order to place a wafer in accurate position. So in this paper, we decide the size of a wafer with Fuzzy Logic and consider the possibility of this method by simulation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.9
• /
• pp.843-848
• /
• 2015

In this paper, The ARR-TSE (Automatic Range Restore - Triangulation based target Size Estimator) algorithm is presented for IIR (Imaging Infrared) seeker. The target size is important information for the IIR target tracking. The TSE (Triangulation based target Size Estimator) algorithm has suitable performance to estimate target size for static IIR target. but, the performance of the algorithm can be decreased by noise. In order to decrease influence of noise, we propose the ARR-TSE algorithm. The performance of proposed method is tested at target intercept scenario. The simulation results show that the proposed algorithm has the accurate target size estimating performance.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.10
• /
• pp.917-923
• /
• 2015

In this paper, the TSE (Triangulation based target Size Estimator) algorithm is presented to estimate static target size at IIR (Imaging Infrared) environment. The size information is important factor for accurate IIR target tracking. But the IIR sensor can't generate distance between missile and target to calculate target size. In order to overcome the problem, we propose TSE algorithm which based on triangulation measurement. The performance of proposed method is tested at target intercept scenario. The experiment results show that the proposed algorithm has suitable performance for the accurate static target size estimating.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.36 no.3
• /
• pp.118-125
• /
• 2013

This paper deals with the picking batch size which a bi-directional carousel system can be feasible. The items that customers order are retrieved from the bins of carousel with batch size. The mathematical equations representing rotary travel distance and retrieval lead time to pick a given batch size are derived. Rotary travel distance represents the distance which carousel system rotates to retrieve items in a batch. The bi-directional carousel system rotates to minimize the travel distance in retrieving the items in a batch. Rotary travel distance and retrieval lead time are analyzed for the batch size through the simulation approach. From the simulation, the retrieval batch size that carousel system can be feasible is obtained. A numerical example is shown to explain the solution procedure.

• Smart Structures and Systems
• /
• v.25 no.4
• /
• pp.471-486
• /
• 2020

Stability analysis of three-layered piezoelectric doubly curved nano shell with accounting size dependency is performed in this paper based on first order shear deformation theory and curvilinear coordinate system relations. The elastic core is integrated with sensor and actuator layers subjected to applied electric potentials. The principle of virtual work is employed for derivation of governing equations of stability. The critical electrical and mechanical buckling loads are evaluated in terms of important parameters of the problem such as size-dependent parameter, two principle angle of doubly curved shell and two parameters of Pasternak's foundation. One can conclude that mechanical buckling loads are decreased with increase of nonlocal parameter while the electrical buckling loads are increased.

• Journal of Families and Better Life
• /
• v.11 no.1
• /
• pp.176-190
• /
• 1993

This study intended to analyze the size and composition of social network and to identify their related variables in urban nuclear families. Data were collected through the questionnaires by wives living in Seoul area. The methods of statistical analysis used in the study were the frequency mean percentile and one-way ANOVA. The findings were as follows; 1) The size of social network in urban nuclear families was 10.0 in average and 2-33 in range. 2) The composition of social network were 45.5% in relatives 20.6% in neighbors. 21.8% in friends. 4,7% in coworkers, 4.1% religious group members 2.1% in associational members. and 1.4% in formal supporters. 3) The birth order of husbands was related to the size of social network. The composition of social network was influenced by SES family life cycle husband's birth order housing type residence duration age education employment religion and familism.