• 한국정밀공학회지
• /
• 제23권1호
• /
• pp.105-112
• /
• 2006

The nonlinear damping force model is made to identify the properties of the ER (electro-rheological) fluid suspension damper. The instrumentation is carried out to measure the damping force of the ER damper. The higher order spectral analysis method is used to investigate the nonlinear frequency coupling phenomena with the damping force signal according to the sinusoidal excitation of the damper. The distinctive higher order nonlinear characteristics are observed. The nonlinear damping force model, which has the higher order velocity terms, is proposed with the result of higher order spectrum analysis. The higher order terms coefficients, which vary according to the strength of the electric field, are calculated using the least square method.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2009년도 정기 학술대회
• /
• pp.135-138
• /
• 2009

Most of the studies use model order reduction for low frequency (LF) response analysis due to their high computational efficiency. In LF response analysis, one of model order reduction, algebraic substructuring (AS) retains all LF modes when using the modal superposition. However, in mid-frequency (MF) response analysis, the LF modes make very little contribution and also increase the number of retained modes, which leads to loss of computational efficiency. Therefore, MF response analysis should consider low truncated modes to improve the computational efficiency. The current work is focused on improving the computational efficiency using a AS and a frequency sweep algorithm. Finite element simulation for a MEMS resonator array showed that the performance of the presented method is superior to a conventional method.

• Structural Engineering and Mechanics
• /
• 제76권5호
• /
• pp.643-651
• /
• 2020

Generally, it is necessary to perform transient structural analysis in order to verify and improve the seismic performance of high-rise buildings and bridges against earthquake loads. In this paper, we propose the model order reduction (MOR) method using the Krylov vectors to perform seismic analysis for linear and elastic systems in an efficient way. We then compared the proposed method with the mode superposition method (MSM) by using the limited numbers of modal vectors (or eigenvectors) calculated from the modal analysis. In the calculation, the data of the El Centro earthquake in 1940 were adopted for the seismic loading in the transient analysis. The numerical accuracy and efficiency of the two methods were compared in detail in the case of a simplified high-rise building.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 봄 학술발표회논문집
• /
• pp.246-252
• /
• 2000

The nonlinearity of a cable-stayed bridge results in the large displacement of main girder due to a long span, the large axial forces reduce the catenary action of cables and the flexural stiffness. Therefore, the static and dynamic behavior of pylon for a cable-stayed bridge plays an important role in determining its safety. This study was performed to find the behavior of pylon of cable-stayed bridge for the first-order analysis considering of axial load only and for the second-order analysis considering of lateral deflection due to axial load. The axial force and moment values of pylon were different from the results of the first-order analysis and second-order analysis according to pylon shape and cross beam stiffness when the pylon was subjected to earthquake and wind loads. In the second-order analysis, comparing the numerical values of the member forces for the dynamic analysis, types 3 and 4 (A type) were relatively more advantageons types than types 1 and 2 (H type). Considering the stability for pylon of cable-stayed bridge (whole structural system), types 3 and 4 (A type) with pre-buckling of girder were proper types than types 1 and 2 (H type) with buckling of pylon.

• Structural Engineering and Mechanics
• /
• 제20권6호
• /
• pp.713-726
• /
• 2005

Based on the improved first order Taylor interval expansion, a new interval analysis method for the static or dynamic response of the structures with interval parameters is presented. In the improved first order Taylor interval expansion, the first order derivative terms of the function are also considered to be intervals. Combining the improved first order Taylor series expansion and the interval extension of function, the new interval analysis method is derived. The present method is implemented for a continuous beam and a frame structure. The numerical results show that the method is more accurate than the one based on the conventional first order Taylor expansion.

• International Journal of Control, Automation, and Systems
• /
• 제3권1호
• /
• pp.56-69
• /
• 2005

In this paper, it is clearly shown that the two well-known necessary and sufficient conditions mp n as generic static output feedback pole-assignment and mp + d(m+p) n+d as generic minimum d-th order dynamic output feedback pole-assignment on complex field, unbelievably, do not match up each other in strictly proper linear systems. For the analysis, a diagram analysis is newly created (which is defined by the analysis of 'convoluted rectangular/dot diagrams' constructed via node-branch conversion of the signal flow graphs of output feedback gain loops). Under this diagram analysis, it is proved that the minimum d-th order dynamic output feedback compensator for pole-assignment in m-input, p-output, n-th order systems is quantitatively decomposed into static output feedback compensator and its associated d number of arbitrary 1st order dynamic elements in augmented (m+d)-input, (p+d)-output, (n+d)-th order systems. Total configuration of the mismatched data is presented in a Table.

• Communications for Statistical Applications and Methods
• /
• 제26권3호
• /
• pp.305-313
• /
• 2019

Generalized canonical correlation analysis (GCCA) extends the canonical correlation analysis (CCA) to the case of more than two sets of variables and there have been many studies on how two-set canonical solutions can be generalized. In this paper, we derive certain stationary equations which can lead the higher-order solutions of several GCCA methods and suggest a type of iterative procedure to obtain the canonical coefficients. In addition, with some numerical examples we present the methods for graphical display, which are useful to interpret the GCCA results obtained.

• 한국의류학회지
• /
• 제22권4호
• /
• pp.442-451
• /
• 1998

The purpose of this study was to investigate the current brand of mail-order clothing, consumers' attitude over importance of brand and the effectiveness of brand when consumers purchase clothing by mail-order shopping. for this study, mail order catalogs were analyzed and the samples were collected through the questionaire distributed to 214 women. It was analyzed by SAS package. The results are as follows; 1. As a result of mail-order catalog analysis, domestic clothing included few famous brand except foreign brand. 2. The users of mail-order purchasing were old and married women comparably. They were also high clothing-expense users and housekeepers. Item that consumers wanted to buy using mail-order shopping were home-wear, night-wear, accessories and scarves which were involved low risks comparably. 3. Consumers regard brand significantly as a means of credit in purchasing mail-order shopping clothing. In analysis between importance of mail-order clothing brand and demographics, degree of education and clothing expense per month showed significant difference.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권5호
• /
• pp.143-151
• /
• 2008

본 연구에서는 2차 비탄성해석과 단면점증법을 이용한 평면 강골조 구조물의 최적설계 방법을 제시하였다. 2차 비탄성해석은 구조시스템과 그에 속한 부재들의 기하학적 비선형과 재료적 비선형을 고려하기 때문에 2차 비탄성해석에 바탕을 둔 설계법에서는 해석 후 개별부재의 강도검토가 필요 없다. 본 논문에서 제안한 단면점증법을 최적화 기법으로 사용하였으며 목적함수로 구조물의 중량을 사용하였다. 제약조건식은 구조시스템의 하중-저항능력, 처짐 및 층간 수평변위 등을 고려하였으며 제안된 방법에 의한 설계결과를 다른 방법에 의한 것들과 비교하여 그 효율성을 증명하였다.

• Smart Structures and Systems
• /
• 제5권5호
• /
• pp.531-546
• /
• 2009

In the present analysis, the spline finite strip with higher-order shear deformation is formulated for the static analysis of piezoelectric composite plates. The proposed method incorporates Reddy's third-order shear deformation theory, Touratier's "Sine" model, Afaq's exponential model, Cho's higher-order zigzag laminate theory, as well as the classic plate theory and the first-order plate theory. Thus, the analysis can be conducted based on any of the above-mentioned theories. The selection of a specific method is done by simply changing a few terms in a 2 by 2 square matrix and the results, obtained according to different plate theories, can be compared to each other. Numerical examples are presented for piezoelectric composite plates subjected to mechanical loading. The results based on different shear deformation theories are compared with the three-dimensional solutions. The behaviours of piezoelectric composite plates with different length-to-thickness ratios, fibre orientations, and boundary conditions are also investigated in these examples.