• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.2
• /
• pp.389-400
• /
• 1996

In Class II amalgam restoration in deciduous molar, failure rate and incidence of recurrent caries are high as children become older. In order to preserve deciduous molars till the physiologic exfoliation time, stainless steel crown is a choice of the treatment. As a result of a careless treatment, such as overhanging margin, poor marginal adaptation, poor proximal contour and inadequate mesiodistal width give rise to interfering eruption of the adjacent teeth, recurrent caries and chronic gingival irritation and insufficient arch length respectively. In this study, 252 s.s. crowned teeth extracted due to physiologic exfoliation or periapical lesion. The purpose of this study is to analyze the marginal adaptation of stainless steel crown to the deciduous molar in order to obtain better clinical result. The results were as follows : 1. Between the length of s.s. crown and the marginal gap of crown, positive correlations were shown. 2. Largest amount of marginal gap was shown at buccal side in upper deciduous molars and lower first deciduous molar, lingual side in lower second deciduous molar. But no significant diffrence were found statistically compared to second most largest one. 3. Incidence of exposed restoration and recurrent caries were higher in proximal surface than buccal/lingual surface. And extension of restoration below the margin of s.s. crown gives rise to higher rate of recurrent caries. 4. Defect of contour was found in 34%, frequently found in lower 1st deciduous molar and upper 1st deciduous molar. 5. Marginal polishing defects were found in 23%. 6. Ledge was formed in 10% especially in lower 1st deciduous molar and lower 2nd deciduous molar. 7. 16% of the teeth had wear facet due to traumatic occlusion, 7% of them had occlusal perforation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.3
• /
• pp.586-590
• /
• 2009

Recently, an AC Plasma Display Panels(PDP) with the metal sustain electrodes have been reported in order to reduce the manufacturing cost of the AC PDP. However, the luminance and efficacy of the AC PDP with metal electrodes are worse than those of the AC PDP with ITO electrodes. In this paper, various ${\prod}$type metal electrodes are suggested, in order to improve the electro-optical characteristics of the AC PDP with metal electrodes. Among the suggested electrode types, luminance of Hump electrode structure is higher by $40\;cd/m^2$ and discharge current of Asymmetry electrode structure is lower by 5% than those of Pi electrode structure, respectively. Moreover, $T_1$ of Hump electrode structure is reduced to 10% as compared with Pi electrode structure in address period for ADS driving scheme. In all aspects, the characteristics of Hump and Asymmetry electrode structure show best performance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.552-555
• /
• 1999

In this paper, the volume resistivity properties due to mixture ration of linear low density polyethylene(LLDPE) and ethylene vinyl acetate(EVA) are studied. Electrodes is composed of upper electrode 37(mm $\Phi$), guardring electrode(inner 55(mm $\Phi$ ), and lower electrode 87(mm $\Phi$ In order to measure the leakage current, We used electrometer and stable oven with temperature controller. Measurement method is to measure the leakage current of next specimen after applying the voltage according to 'Step Apply Methods' for ten minutes. In order to measure the volume resistivity properties, the micro electrometer is used, the range of temperature and applying voltage are 25 to 100[$^{\circ}C$] to 100[V] respectively.

• Fashion & Textile Research Journal
• /
• v.18 no.1
• /
• pp.91-102
• /
• 2016

This study classified the lower body types of female adults aged 18 to 69. The lower body was divided into front, lateral front, and lateral back. In order to understand the shape and somatotype of each segment, 592 people were analyzed based on girth, height, length, depth, width, angle and cross section distance for each segment. For data analysis, SPSS 18.0 was performed for descriptive statics, principal component analysis, K-means cluster analysis, ANOVA, and Duncan's test (as verification). Factor analysis was performed based on index values, calculation values, angles, and cross section distances. The measured items resulted in a.) 16 items were extracted to 5 factors in the case of the front factor (FF) of the lower body, and b.) 24 items were extracted to 6 factors in the case of lateral front factor (LFF) and lateral back factor (LBF). Each factor was put through K-means cluster analysis, classifying the lower bodies into one of four types of based on the front type (FT), the lateral front type (LFT), and the lateral back type (LBT) respectively. This study proposed an understanding of various lower body shapes by segmenting and classifying the lower body shapes for each type.

• Journal of the Korean Society of Costume
• /
• v.14
• /
• pp.199-208
• /
• 1990

In order to eximine the body form of the physically handicapped people, the 11 items of angle, 54 items of size and weight of the subjects were measured body silhouetter photographs and with the Martin's anthrophometeric instrument respectively. The subjects were consist of 37 boy students who are 13-19 years old and hemiplegias caused by cerebral palsy. And then the comparison between normal and paralysis sides, analysis of somatotypes with the body silhouetter photographs, ANOVA for effect of somatotype on measuring items for angles, and factor analysis for all items were carried out. The results were as follows: 1. The results of measuring are difference between normal and paralysis sides. 2. The items shown significant differences between normal and paralysis sides are diagonal anterior chest B, scapula length, armscye girth, diagonal posterior chest A, and arc of the bust. 3. The percentage of each somatotype shows the order of bending somatotype, turning over somatotype, turning over-bending somatotype, and standard somatotype in the upper body. There are significant differences between somatotypes and sternalis up, sternalis down, scapula, vertebialis, ${\alpha}$, and ${\beta}$ angles respectively. 4. From the result of factor analysis, front and back sections, length items of the upper part and the lower part from the bust line, and the upper size items at the bottom of armscye were abstracted.

• Environmental Engineering Research
• /
• v.21 no.2
• /
• pp.203-210
• /
• 2016

Hybrid materials were obtained modifying the bentonite (BC) and local clay (LC) using hexadecyltrimethylammonium bromide (HDTMA) or the clay were pillared with aluminum followed by modification with HDTMA. The materials were characterized by the SEM, FT-IR and XRD analytical tools. The batch reactor data implied that the uptake of $17{\beta}$-estradiol (E2) by the hybrid materials showed very high uptake at the neutral pH region. However, at higher and lower pH conditions, slightly less uptake of E2 was occurred. The uptake of E2 was insignificantly affected changing the sorptive concentration from 1.0 to 10.0 mg/L and the background electrolyte (NaCl) concentrations from 0.0001 to 0.1 mol/L. Moreover, the sorption of E2 by these hybrid materials was fairly efficient since within 30 mins of contact time, an apparent equilibrium between solid and solution was achieved, and the data was best fitted to the PSO (pseudo-second order) and FL-PSO (Fractal-like-pseudo second order) kinetic models compared to the PFO (pseudo-first order) model. The fixed-bed column results showed that relatively high breakthrough volume was obtained for the attenuation of E2 using these hybrid materials, and the loading capacity of E2 was estimated to be 75.984, 63.757, 58.965 and 49.746 mg/g for the solids BCH, BCAH, LCH and LCAH, respectively.

• Journal of Oral Medicine and Pain
• /
• v.3 no.1
• /
• pp.11-22
• /
• 1977

In order to evaluate the normal eruption time of the Korean permanennt teeth, the author had examined the eruption phases of permanent first molars in 778 males and 653 female children aged from 5 to 9-year old and analysed. The eruption was divided into 4 phases; the tip of the crown can be seen, the dull occlusal surface of the crown can be easily seen, the crown is not in contact with its antagonist, and the crown is in contact with its antagonist. The obtained results were as follows : 1. It seemed that percentage of the eruptingand erupted permanent first molar in female by age was higher than that of male. 2. In general, percentage of the erupting and erupted permanent first molar by age was higher than that of upper first molar. 3. In the correlation of age with the eruption phase, the regression equation were "y=0.43x+5.61" on male upper first molar, "y=0.41x+5.60" on male lower first molar, "y=0.44x+5.47" on female upper first molar, and "y=0.38x+5.57" on female lower first molar respectively.n female lower first molar respectively.

• Korean Journal of Hazardous Materials
• /
• v.6 no.2
• /
• pp.23-29
• /
• 2018

The fire and explosion properties necessary for waste, safe storage, transport, process design and operation of handling flammable substances are lower explosion limits(LEL), upper explosion limits(UEL), flash point, AIT( minimum autoignition temperature or spontaneous ignition temperature), fire point etc., An accurate knowledge of the combustion properties is important in developing appropriate prevention and control measures fire and explosion protection in chemical plants. In order to know the accuracy of data in MSDSs(material safety data sheets), the flash point of phenol was measured by Setaflash, Pensky-Martens, Tag, and Cleveland testers. And the AIT of phenol was measured by ASTM 659E apparatus. The explosion limits of phenol was investigated in the reference data. The flash point of phenol by using Setaflash and Pensky-Martens closed-cup testers were experimented at $75^{\circ}C$ and $81^{\circ}C$, respectively. The flash points of phenol by Tag and Cleveland open cup testers were experimented at $82^{\circ}C$ and $89^{\circ}C$, respectively. The AIT of phenol was experimented at $589^{\circ}C$. The LEL and UEL calculated by using Setaflash lower and upper flash point value were calculated as 1.36vol% and 8.67vol%, respectively. By using the relationship between the spontaneous ignition temperature and the ignition delay time proposed, it is possible to predict the ignition delay time at different temperatures in the handling process of phenol.

• Steel and Composite Structures
• /
• v.27 no.4
• /
• pp.427-438
• /
• 2018

In this paper, the single and multi-objective optimization of thin-walled conical tubes with different types of indentations under axial impact has been investigated using surrogate models called metamodels. The geometry of tapered thin-walled tubes has been studied in order to achieve maximum specific energy absorption (SEA) and minimum peak crushing force (PCF). The height, radius, thickness, tapered angle of the tube, and the radius of indentation have been considered as design variables. Based on the design of experiments (DOE) method, the generated sample points are computed using the explicit finite element code. Different surrogate models including Kriging, Feed Forward Neural Network (FNN), Radial Basis Neural Network (RNN), and Response Surface Modelling (RSM) comprised to evaluate the appropriation of such models. The comparison study between surrogate models and the exploration of indentation shapes have been provided. The obtained results show that the RNN method has the minimum mean squared error (MSE) in training points compared to the other methods. Meanwhile, optimization based on surrogate models with lower values of MSE does not provide optimum results. The RNN method demonstrates a lower crashworthiness performance (with a lower value of 125.7% for SEA and a higher value of 56.8% for PCF) in comparison to RSM with an error order of $10^{-3}$. The SEA values can be increased by 17.6% and PCF values can be decreased by 24.63% by different types of indentation. In a specific geometry, higher SEA and lower PCF require triangular and circular shapes of indentation, respectively.

• Physical Therapy Korea
• /
• v.15 no.2
• /
• pp.30-37
• /
• 2008

Anticipatory postural adjustments are pre-planned by the central nervous system (CNS) before the activation of agonist muscles in the limbs, and minimize postural sway. Most previous studies on this topic have focused on upper-limb movement, and little research has been conducted on lower-limb movement. The purpose of this study was to investigate the recruitment order of left and right trunk muscles during limb movement. Fifteen healthy subjects (10 male, 5 female) were enrolled. Electro-myographic signals were recorded on the muscles of: (1) deltoid, lumbar erector spinae, latissimus dorsi and internal oblique during shoulder flexion, (2) rectus femoris, rectus abdominis, external oblique and internal oblique during hip flexion. During right upper limb flexion, the onset of left erector spinae muscle and left internal oblique muscle activity preceded the onset of right deltoid by 8.09 ms and 19.83 ms, respectively. But these differences were not significant (p>.05). A similar sequence of activation occurred with lower limb flexion. The onset of left internal oblique muscle activity preceded the onset of right rectus femoris muscle by 28.29 ms (p<.05). The onset of right internal oblique muscle activity preceded the onset of left rectus femoris muscles by 23.24 ms (p<.05). The internal oblique muscle was the first activated during limb movement. Our study established the recruitment order of trunk muscles during limb movement, and explained the postural control strategy of the trunk muscles in healthy people. We expect that this study will be used to evaluate patients with an asymmetric recruitment order of muscle activation due to impaired CNS.