• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.37 no.6
• /
• pp.439-447
• /
• 2011

Introduction: In today's society, the rapid and appropriate care of the dental emergency patients is much more important. So, a retrospective study on the characteristics of emergency dental injuries and diseases will be very meaningful. Materials and Methods: This retrospective clinical study was carried by reviewing the radiographic films and emergency chart of 11,493 patients who had visited the emergency room of Hallym Sacred heart Hospital and were treated in the Department of Oral and Maxillofacial Surgery from January 2006 to December 2010. Results: The male to female ratio was 1.9:1. The highest monthly incidence was observed in May (10.4%) and June (8.9%) and the peak age distribution was the first decade (56.0%), followed by the second decade (16.0%). Trauma was the most common cause in dental emergency patients, followed in order by toothache, odontogenic infection, temporomandibular joint (TMJ) disorder and oral hemorrhage. Soft tissue injury was most prevalent in the trauma group, followed by tooth injury and facial bone fractures. In the tooth injury group, tooth fracture (56.7%) showed the highest incidence followed in order by tooth subluxation (18.2%), tooth concussion (16.9%), tooth avulsion (11.5%) and alveolar bone fractures (3.7%). In the facial bone fracture group, mandibular fractures (81.8%) showed the highest incidence followed in order by maxilla fractures (15.7%), nasal bone fractures (9.0%), zygomaticomaxillary complex fractures (5.4%), orbital bone fractures (2.5%). In mandibular bone fractures, the most common location was the symphysis (70.1%), followed in order by the mandibular angle (33.0%), mandibular condyle (22.8%) and mandibular body (13.6%). In the infection group, a submandibular space abscess (46.2%) was most common followed in order by a buccal space abscess (17.4%), canine space abscess (16.9%) and submental space abscess (12.3%). TMJ dislocation (89.3%) showed the highest incidence in the TMJ disorder group, followed by TMJ derangement (10.7%). In the other group, a range of specific symptoms due to post operation complications, trigeminal neuralgia, chemical burns and foreign body aspiration were reported. Conclusion: For the rapid and appropriate care of the dental emergency patients, well-organized system should be presented in oral and maxillofacial surgery. And it is possible under analysis of pattern and the variation of the dental emergency patients.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.61.1-61.1
• /
• 2015

We performed a monitoring campaign of a Jupiter-Family comet 17P/Holmes, which underwent the dramatic outburst on 23.3 October 2007 at $r_h=2.44AU$, to investigate the secular change in activity and subsequent physical properties of the inner dust coma before and after the 2014 perihelion passage. The monitoring observation was carried out over two years: from May to July 2013, from July to November 2014, and January 2015 with ~weekly cadence. We conducted photometry monitoring in Rc band using four ground-based telescopes, which are the Ishigakijima Astronomical Observatory 105cm telescope, the Okayama Astrophysical Observatory 50cm telescope, the Nishi-Harima Astronomical Observatory 2m telescope, and the T30 51cm i-telescope, respectively. In order to examine the dust production rate, we put a constraint upon the physical distance from the center of the nucleus as rho=2500km and conducted aperture photometry. We found that the average absolute Rc magnitude over the period between July to November 2014 was mR(1,1,0)~12.29, which was approximately 1.5 magnitudes fainter than those of 2013 data. Accordingly, comet 17P/Holmes seemed to become dormant, although a minor eruption was detected on January 26, 2015. In this presentation, we will introduce our ongoing project for 17P/Holmes and discuss why the nucleus becomes dormant within one orbital period.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.5
• /
• pp.1479-1484
• /
• 2014

Based on the full optimized molecular geometric structures at B3LYP/cc-pvtz method, a new designed compound, 4,6,8-trinitro-4,5,7,8-tetrahydro-6H-furazano[3,4-f ]-1,3,5-triazepine was investigated in order to look for high energy density compounds (HEDCs). The analysis of the molecular structure indicates that the seven-membered ring adopts chair conformation and there exist intramolecular hydrogen bond interactions. IR spectrum and heat of formation (HOF) were predicted. The detonation velocity and pressure were evaluated by using Kamlet-Jacobs equations based on the theoretical density and condensed HOF. The bond dissociation energies and bond orders for the weakest bonds were analyzed to investigate the thermal stability of the title compound. The results show that $N_1-N_6$ bond is the trigger bond. The crystal structure obtained by molecular mechanics belongs to $Pna2_1$ space group, with lattice parameters Z = 4, a = 15.3023 ${\AA}$, b = 5.7882 ${\AA}$, c = 11.0471 ${\AA}$, ${\rho}=2.06gcm^{-3}$. In addition, the analysis of frontier molecular orbital shows the title compound has good stability and high chemical hardness.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.36 no.6
• /
• pp.266-272
• /
• 2014

Purpose: This study was conducted in order to investigate the therapeutic effect of closed reduction according to a classification in patients with nasal bone fracture. Methods: The study was conducted retrospectively on 186 patients with a mean age of 38 years (range: 7 to 80 years). All patients were diagnosed by clinical and radiologic examination, and then classified according to Hwang's classification by computed tomography. The patients were further classified by their age, gender, causes of fracture, operation timing after fracture, concurrent facial bone fracture, and complications. All patients underwent the same reduction and treatment protocol and were then followed up regularly for at least three months. Results: The cause of the fracture was slip down, and the highest prevalence was shown in the 20s. The mean operation timing after fracture was 4.1 days (range: 1 to 14 days), and it tended to be longer in the case of defected septal bone or more severe fracture. The most common concurrent facial bone fracture was orbital blow-out fracture, and zygomaticomaxillary complex and maxillary fracture occured frequently. The largest number of complications occurred in class III and IIBs patients, and the main complication was postoperative pain. Conclusion: Results of nasal bone closed reduction on the 186 patients showed that serious complications rarely occurred. Closed reduction is generally an effective treatment for nasal bone fracture. However, in the case of severe concurrent septal bone fracture or comminuted fracture with depression, open reduction should be considered. Further study with a larger number of patients and further classification is required.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.2
• /
• pp.215-220
• /
• 2002

The structures of 1-fluorosilatrane and the silatranyl cation were calculated by Hartree-Fock (HF), Mofller-Plesset second order (MP2), and various density functional theory (DFT) methods using many different basis sets, demonstrating that the Si-N bonds in two species are quite different. The N${\rightarrow}$Si bond distance of 1-fluorosilatrane from the hybrid DFT calculations $({\sim}2.32{\AA})$ using the Perdew-Wang correlation functional agrees with the gas phase experimental value $(2.324{\AA})$, while other functionals yield larger distances. The MP2 bond distance (2.287${\AA}$ with 6-311$G^{\ast}$) is shorter, and the HF one (2.544 ${\AA}$ with 6-311$G^{\ast}$) larger than those of DFT calculations. The MP2 bond distance is in good agreement with experiment indicating that the electron correlations are crucial for the correct description of the N${\rightarrow}$Si interaction. The silatranyl cation is a stable local minimum on the potential energy surface in all methods employed suggesting that the cation could be a reaction intermediate. The Si-N bond length for the cation is about 1.87 ${\AA}$ for all calculations tested implying that the Si-N bond is mainly conventional. Bonding characteristics of the Si-N bond in two species derived from the natural bond orbital analysis support the above argument based on calculated bond lengths.

• Journal of Astronomy and Space Sciences
• /
• v.23 no.4
• /
• pp.311-318
• /
• 2006

High-precision photometric observations were performed in BVI bandpasses using Am robotic telescope at Mt. Lemmon Observatory for two binary stars, which are reclassified as W UMa-type systems from ROTSE(Robotic Optical Transient Search Experiment) follow-up observations and show peculiar light variations. In order to analyze W UMa-type eclipsing binaries systematically, the light curve analysis script using 2005 version of Wilson-Devinney binary code is constructed. The orbital inclinations of GSC2S84-1731 and GSC2576-0319 are $43.^{\circ}5\;and\;57.^{\circ}6$ from light-curve analysis, respectively. Spot model is applied to explain the asymmetric light curve for GSC2S84-1731 and the spot parameters are derived.

• Journal of Positioning, Navigation, and Timing
• /
• v.6 no.2
• /
• pp.79-86
• /
• 2017

Precise Point Positioning-Real Time Kinematic (PPP-RTK) refers to a technology that combines PPP with network-RTK in which a user does not directly receive observed data from a reference station but receives State-Space Representation (SSR) messages corrected for error components from a central processing station through Networked Transport of RTCM via Internet Protocol (NTRIP) or Digital Multimedia Broadcasting (DMB) for purposes of positioning. SSR messages, which refer to corrections used in PPP-RTK, are generated by a central processing station using real-time observed data collected from reference stations and account for corrections needed due to the ionosphere, troposphere, satellite orbital errors, satellite time offsets, and satellite biases. This study used a type of SSR message provided in South Korea, known as Korea-SSR (K-SSR), to implement a PPP-RTK algorithm based on code-pseudorange measurements and validated its accuracy within the reference station network. In order to validate the accuracy of the implemented algorithm outside of the network, the K-SSR was extrapolated and applied to positioning in reference stations in Changchun, China (CHAN) and Japan (AIRA). This also entailed a quantitative evaluation that measured improvements in accuracy in comparison with point positioning. The results of the study showed that positioning applied with extrapolated K-SSR correction data was more accurate in both AIRA and CHAN than point positioning with improvements of approximately 20~50%.

• Journal of the Korean Chemical Society
• /
• v.39 no.3
• /
• pp.150-156
• /
• 1995

Molecular orbital calculations at the ab initio, AM1, and PM3 levels have been carried out to investigate the lactam-lactim tautomerism of 1,2,4-triazolidine-3,5- dione(1) and 1,3,4-oxa(or thia)diazolidine-2,5-dione(2, 3). Most stable tautomer in 1 compound has been calculated to be a dilactam 1a and next one is lactam-lactim 1b. The relative energies between 1a and 1b are 4.1~12.6 kcal/mol depending on computational methods. The optimized 1a structure at ab initio level is in good agreement with X-ray structure. While the stabilities of 2 tautomers are in order of 2a>2b>2c, the stabilities of 3 tautomers are dependent on methods. According to 3-21G basis set, 3a tautomer is more stable by 4.9 kcal/mol over 3b tautomer. In contrast, the heat of formation of 3a at AM1 is higher by 2.71 kcal/mol than 3b.

• Journal of the Korean Magnetics Society
• /
• v.1 no.2
• /
• pp.9-14
• /
• 1991

In order to investigate electronic and magnetic properties of $Fe_{16}N_{2}$ ferromagnet, we have performed electronic structure calculations employing the self-consistent local density functional LMTO(linearized muffin tin orbital) band method. We have obtained the ground state parameters, such as band structures, density of states, Stoner parameters, and magnetic moments. Based on these results, we have investigated microscopically the magnetic structure and the enhancement of Fe magnetic moments in this compound. Magnetic moments of 3 types of Fe(Fe I, Fe II and Fe III) in $Fe_{16}N_{2}$ are 2.13, 2.50, and $2.85\;{\mu}_{B}$, respectively. Large enhancement of Fe magnetic moment is observed in Fe II and Fe III, which are located rather far from N. This implies that local environment is very important in determining the Fe magnetic moments in this compound. Our value of average magnetic moment per Fe atom. $2.50\;{\mu}_{B}$, is a bit smaller than the reported estimate, $-3.0\;{\mu}_{B}$, from the experiment.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.3
• /
• pp.138-145
• /
• 2012

The material used in this study is dielectric and ferrite. Because of the unique characteristics of the material, it is easily exposed to external shocks and pressure, which cause damage to the product. However, after being processed under high-temperature environment repeatedly, the mechanical strength of the product is greatly increased due to the change of the electrical properties. In this paper, dielectric and bonded ferrite material was tested for the material properties. The equipment for this experiment was produced and tested to allow Cylindrical and Three-dimensional geometry of the product for the vacuum deposition. For Cylindrical shape of the product, in order to obtain the equivalent film thickness, the device is constructed in a vacuum chamber which gives arbitrary revolving and rotating capability. The electrical performance of the product is obtained through this process as well. However, as mentioned above, with repeating processes under high temperature and exposure to external environment, the product is easy to be broken. This experiment has enabled us to find out a stable condition to apply the communication of the RF high frequency to each of the core elements, such as Ferrite and Dielectric which is then used for the mechanical strength of the Raw material, hetero-junction material, Hetero-junction Ag Coating material and hetero-junction Ag Coating SiO2 Coating material respectively.