• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.440-440
• /
• 2011

We report on the non-volatile memory characteristics of a bistable organic memory (BOM) device with Au nanoparticles (NPs) embedded in a conducting poly N-vinylcarbazole (PVK) colloids hybrid layer deposited on flexible polyethylene terephthalate (PET) substrates. Transmission electron microscopy (TEM) images show the Au nanoparticles distributed isotropically around the surface of a PVK colloid. The average induced charge on Au nanoparticles, estimated using the C-V hysteresis curve, was large, as much as 5 holes/NP at a sweeping voltage of ${\pm}3$ V. The maximum ON/OFF ratio of the current bistability in the BOM devices was as large as $1{\times}105$. The cycling endurance tests of the ON/OFF switching exhibited a high endurance of above $1.5{\times}105$ cycles and a high ON/OFF ratio of ~105 could be achieved consistently even after quite a long retention time of more than $1{\times}106$ s.

• Journal of the Korean Ceramic Society
• /
• v.50 no.3
• /
• pp.173-179
• /
• 2013

Wurtzite nanomaterials, such as ZnO, GaN, and InN, have become a subject of great scientific and technological interest as they simultaneously have piezoelectric and semiconductor properties. In particular, the piezoelectric potential (piezopotential) created by dynamic straining in the nanowires drives a transient flow of current in the external load, converting mechanical energy into electricity. Further, the piezopotential can be used to control the carrier generation, transport, separation, and/or recombination at the metal-semiconductor junction or p-n junction, which is called the piezophototronic effect. This paper reviews the recent advances on the piezophototronic effect to better use the piezophototronic effect to control the carrier generation, transport, separation and/or recombination for improving the performance of optoelectronic devices, such as photon detectors, solar cells and LEDs. This paper also discusses several research and design studies that have improved the output performance of optoelectronic devices.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.10 no.3
• /
• pp.213-224
• /
• 2010

An optically controlled silicon MESFET (OPFET) was fabricated by diffusion process to enhance the quantum efficiency, which is the most important optoelectronic device performance usually affected by ion implantation process due to large number of process induced defects. The desired impurity distribution profile and the junction depth were obtained solely with diffusion, and etching processes monitored by atomic force microscope, spreading resistance profiling and C-V measurements. With this approach fabrication induced defects are reduced, leading to significantly improved performance. The fabricated OPFET devices showed proper I-V characteristics with desired pinch-off voltage and threshold voltage for normally-on devices. The peak photoresponsivity was obtained at 620 nm wavelength and the extracted external quantum efficiency from the photoresponse plot was found to be approximately 87.9%. This result is evidence of enhancement of device quantum efficiency fabricated by the diffusion process. It also supports the fact that the diffusion process is an extremely suitable process for fabrication of high performance optoelectronic devices. The maximum gain of OPFET at optical modulated signal was obtained at the frequency of 1 MHz with rise time and fall time approximately of 480 nS. The extracted transconductance shows the possible potential of device speed performance improvements for shorter gate length. The results support the use of a diffusion process for fabrication of high performance optoelectronic devices.

• Applied Science and Convergence Technology
• /
• v.23 no.5
• /
• pp.284-288
• /
• 2014

We present tapered nanostructures fabricated on a selective area of gallium phosphide substrates for advanced optoelectronic device applications. A lithography-free fabrication process was accomplished by dry etching of metal nanoparticles. Thermal dewetting of micro-patterned metal thin films provides etch masks for tapered nanostructures. This simple process also allows the formation of plasmonic surfaces with corrugated shapes. Rigorous coupled-wave analysis calculations provide design guidelines for tapered nanostructures on gallium phosphide substrates.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.100-100
• /
• 2016

Among various two-dimensional (2D) materials, 2D semiconductors and insulators have attracted a great deal of interest from nanoscience community beyond graphene, due to their attractive and unique properties. Such excellent characteristics have triggered highly active researches on 2D materials, such as hexagonal boron nitride (hBN), molybdenum disulfide (MoS2), and tungsten diselenide (WSe2). New physics observed in 2D semiconductors allow for development of new-concept devices. Especially, these emerging 2D materials are promising candidates for flexible and transparent electronics. Recently, van der Waals heterostructures (vdWH) have been achieved by putting these 2D materials onto another, in the similar way to build Lego blocks. This enables us to investigate intrinsic physical properties of atomically-sharp heterostructure interfaces and fabricate high performance optoelectronic devices for advanced applications. In this talk, fundamental properties of various 2D materials will be introduced, including growth technique and influence of defects on properties of 2D materials. We also fabricate high performance electronic/optoelectronic devices of vdWH, such as transistors, memories, and solar cells. The device platform based on van der Waals heterostructures show huge improvement of devices performance, high stability and transparency/flexibility due to unique properties of 2D materials and ultra-sharp heterointerfaces. Our work paves a new way toward future advanced electronics based on 2D materials.

• Electronics and Telecommunications Trends
• /
• v.34 no.5
• /
• pp.81-90
• /
• 2019

The data rate for transmission through fiber-optic cables has increased to 400 Gbps in single-wavelength channels. However, speeds up to 1 Tbps are required now to meet the ever-increasing bandwidth demand driven by the diverse requirements of contemporary applications for high-quality on-demand video streaming, cloud services, various social media, and emerging 5G-enabled applications. Because the data rates of the per-channel optical interfaces depend strongly on the operational speed of the optoelectronic devices used in optical transceivers, ultrahigh-speed photonic devices and components, and eventually, chip-level transmitter and receiver technologies, are essentially required to realize futuristic optical transceivers with data rates of 1 Tbps and beyond. In this paper, we review the recent progress achieved in high-speed optoelectronic devices, such as laser diodes, optical modulators, photodiodes, and the transmitter-receiver optical subassembly for optical transceivers in data centers and in metro/long-haul transmission.

• Journal of Sensor Science and Technology
• /
• v.25 no.4
• /
• pp.252-256
• /
• 2016

Epitaxially grown GaN layers have a high surface state density, which typically results in a surface leakage current and a photoresponse in undesirable wavelengths in GaN optoelectronic devices. Surface passivation is, therefore, an important process necessary to prevent performance degradation of GaN UV photodetectors. In this study, we propose oxygen-enhanced thermal treatment as a simple surface passivation process without capping layers. The GaN UV photodetector fabricated using a thermal annealing process exhibits improved electrical and photoresponsive characteristics such as a reduced dark current and an enhanced photoresponsive current and UV-to-visible rejection ratio. The results of this study show that the proposed surface passivation method would be useful to enhance the reliability of GaN-based optoelectronic devices.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.64.2-64.2
• /
• 2011

Recently, Silicon Germanium (SiGe) alloys have been received considerable attention for their great potentials in advanced electronic and optoelectronic devices. Especially, microcrystalline SiGe is a good channel material for thin film transistor due to its advantages such as narrow and variable band gap and process compatibility with Si based integrated circuits. In this work, microcrystalline silicon-germanium films (${\mu}c$-SiGe) were deposited by DC/RF magnetron co-sputtering method using Si and Ge target on Corning glass substrates. The film composition was controlled by changing DC and RF powers applied to each target. The substrate temperatures were changed from $100^{\circ}C$ to $450^{\circ}C$. The microstructure of the thin films was analyzed by x-ray diffraction (XRD) and Raman spectroscopy. The analysis results showed that the crystallinity of the films enhances with increasing Ge mole fraction. Also, crystallization temperature was reduced to $300^{\circ}C$ with $H_2$ dilution. Hall measurements indicated that the electrical properties were improved by Ge alloying.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.3
• /
• pp.83-88
• /
• 2003

The optoelectronic characteristics of semiconducto-atomic superlattice as a function of deposition temperature and annealing conditions have been studied. The nanocrystalline silicon/adsorbed oxygen superlattice formed by molecular beam epitaxy(MBE) system. As an experimental result, the superlattice with multilayer Si-O structure showed a stable photoluminescence(PL) and good insulating behavior with high breakdown voltage. This is very useful promise for Si-based optoelectronics and quantum devices as well as for the replacement of silicon-on-insulator (SOI) in ultra-high speed and lower power CMOS devices in the future, and it can be directly integrated with silicon ULSI processing.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.258-259
• /
• 2000

Quantum Well Disordering (QWD) has drawn a considerable attention in recent years$^{(1-3)}$ due to its wide applicability to optoelectronic devices. QWD allows modification of the shape of QW in selected regions, hence it modifies the subband energies in conduction and valance bands$^{(4)}$ . This leads to changes in optical properties such as band gap, absorption coefficient and refractive index. Thus such disordering in selected areas enables monolithic integration of various optoelectronic devices such as lasers, EA/EO modulators, waveguides and optical amplifiers. In this paper, we investigate the quantum well disordering effects on photoluminescence spectra by using experimental measurements and theoretical analysis$^{(5)}$ . (omitted)