• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.286-290
• /
• 2011

This paper introduces the optimum macro-siting of a potential site for an offshore wind farm around Jeju Island using the RDAPS sea wind model. The statistical model was developed by analyzing the sea wind data from RDAPS model, and the meso-scale digital wind map was prepared. To develop the high resolution spatial calibration model, Artificial Neural Network(ANN) models were used to construct the wind and bathymetric maps. Accuracy and consistency of wind/bathymetric spatial calibration models were obtained using analysis of variance. The optimization problem was defined to maximize the energy density satisfying the criteria of maximum water depth and maximum distance from the coastline. The candidate site was selected through Genetic Algorithm(GA). From the results, it is possible to predict roughly a candidate site location for the installation of the offshore wind jam, and to evaluate the wind resources of the proposed site.

• 대한원격탐사학회지
• /
• 제2권2호
• /
• pp.79-94
• /
• 1986

TM data, which have better resolution in spatial and spectral than MSS data, were used for this study, and several Image Processing Techniques (IPT) were examined for finding the best IPT to fit to lineament extraction and mineralized zone mapping. The Ryeongnam area was selected as test area, because the area is one of major mineralized zones in Korea and its hydrothermal alteration zone is wider and deeper than other areas. The spatial filtering method is most optimum one for limeament extraction: that is, the directional spatial filtering is most efficient to detect N-S, E-W direction lineaments on the image, and the high boost filtering can be applied for mapping all direction lineaments. The ratio method was selected for detecting altered zone. It is possible to make several tens combinations in ratio with 7 bands of TM data, but considering spectral characteristics of each band of TM to the geological meterials and vegetation, the band 4/band 3(A), band 5/band 7(B), and B/A ratio methods were chosen among them. The 5/7 ratio image did not show clearly the altered area due to noise from vegetation cover, so the 4/3 ratio imae was used for trying to decrease the effect of vegetation. As a result the B/A ratio image showed quite nicely the altered zone of the test area. In conclusion, the spatial filtering is the best image processing techniques for lineament mapping, and the B/A ratio image in TM data is useful for the mineralized zone mapping.

• 대한의용생체공학회:의공학회지
• /
• 제19권3호
• /
• pp.225-232
• /
• 1998

무정형 실리콘을 기반으로 한 X-선 영상기기에 대한 Monte Carlo 시뮬레이션 결과를 기술하였다. 무정형 실리콘 X-선 영상기기의 특성을 조사하고 최적의 설계변수들을 제공하기 위하여 Monte Carlo 시뮬레이션을 수행하였다. 본 연구의 목적에 맞도록 Monte Carlo simulation codes를 개발하였고, X-선 최대전압, 알루미늄 필터 두께, Cal(T1)두께, 그리고 무정형 실리콘 광다이오우드 픽셀 크기들을 변화시키면서 무정형 실리콘 X-선 영상기기의 계측 효율과 해상도의 변화를 연구하였다. 60kVP-120kVp의 X-선에 대하여, CsI(TI)의 두께가 300um-500um일 때 계측효율은 70%-95% 였고 에너지 흡수효율은 40%-70%였다. 시뮬레이션 결과로부터, 무정형 실리콘 픽셀크기와 Csl(TI) 두께가 해상도를 결정하는 가장 주된 요소임이 밝혀졌다. 본 연구에서 개발한 시뮬레이션을 사용하여 감도와 해상도를 최적화할 수 있는 적절한 픽셀 크기와 CsI(TI) 두께를 찾아낼 수 있었다.

• 디지털산업정보학회논문지
• /
• 제10권4호
• /
• pp.63-70
• /
• 2014

Method a target estimation in spatial are mobile wireless communication using network cell and GPS. It have much error that mobile wireless communication depend on cell size. GPS method can't find a target in shadow and inner area. In this paper, we estimate a target as direction of arrival method using adaptive array antenna system. Adaptive array antenna system can obtain desired signal to remove other signal This paper studied digital beamforming method in order to estimation a target. Proposed method is modified optimum weight and antenna error correction to estimation an optimal receive signal. Digital beamforming method decided a signal phase and amplitude from received signal on array antenna element. But if it is not to do error correction of received signal, system performance have decreased. Firstly, we proposed modified optimum weight in order to finding desired target. Secondly, we are error correction of antenna incident signals by optimal weight before digital beamforming method. Thirdly, throughly simulation, we showed that system performance of proposed method compare proposal method with general method. It have improved resolution of estimation target to good performance more proposed method than general method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.735-741
• /
• 2003

A simplified view of array design and application process was introduced. Array design is critical to achieve a successful phased array measurements. A planar microphone array is designed to produce optimum performance and also to fit economic requirement in integrating data acquisition system. Certain performance characteristics are of primary concern when designing arrays. These characteristics include array resolution, spatial aliasing and array sidelobe suppression. Every array has its directional pattern that shows such characteristics. Assuming that a monopole source is located in center, beam-patterns have been simulated varying measurement conditions such as number of sensors. array aperture size, distance between array and source, frequency of interest and so on. Sensor correction was conducted on very channel using magnitudes and phased of FRF with respect to a reference microphone channel. Then with a spiral type array, measurements have been made with two point sources of same frequency in order to investigate array resolving abilities. It is observed that higher frequency source achieves better resolution than lower one does.

• 한국농공학회논문집
• /
• 제57권6호
• /
• pp.91-97
• /
• 2015

The Unmanned Aerial Vehicles (UAVs) have several advantages over conventional RS techniques. They can acquire high-resolution images quickly and repeatedly. And with a comparatively lower flight altitude i.e. 80~400 m, they can obtain good quality images even in cloudy weather. Therefore, they are ideal for acquiring spatial data in cases of small agricultural field with mixed crop, abundant in South Korea. This paper discuss the use of low cost UAV based remote sensing for classifying crops. The study area, Gochang is produced by several crops such as red pepper, radish, Chinese cabbage, rubus coreanus, welsh onion, bean in South Korea. This study acquired images using fixed wing UAV on September 23, 2014. An object-based technique is used for classification of crops. The results showed that scale 250, shape 0.1, color 0.9, compactness 0.5 and smoothness 0.5 were the optimum parameter values in image segmentation. As a result, the kappa coefficient was 0.82 and the overall accuracy of classification was 85.0 %. The result of the present study validate our attempts for crop classification using high resolution UAV image as well as established the possibility of using such remote sensing techniques widely to resolve the difficulty of remote sensing data acquisition in agricultural sector.

• 한국인터넷방송통신학회논문지
• /
• 제12권4호
• /
• pp.147-152
• /
• 2012

본 연구는 공간상에서 전파를 이용하여 원하는 목표물의 도래 방향을 추정 한다. 도래방향 추정은 수신 배열 안테나들로 입사하는 신호들 중에서 원하는 목표물의 위치를 찾는 것이다. 본 연구에서는 도래방향 추정의 고 분해능 MUSIC알고리즘과 비용함수를 사용하여 목표물에 대한 도래방향을 추정하였고, 최적의 가중치를 계산하였다. 모의실험을 통하여 목표물 도래 방향 추정에서 기존 ESPRIT 알고리즘과 제안 알고리즘의 성능을 비교 분석 하였다. 목표물 도래 방향 추정에서 제안한 알고리즘이 기존의 ESPRIT 알고리즘보다 도래 방향 추정 능력이 향상되었다.

• Journal of Radiation Protection and Research
• /
• 제28권4호
• /
• pp.263-270
• /
• 2003

유방암 진단에 필요한 감마카메라 검출전단부의 최적변수 유도와 유방암 진단조건 하에서의 평가를 위한 몬테카를로 모사를 수행하였다. 모사를 위해 픽셀화된 포토센서에 상응하는 $3mm{\times}3mm$의 구멍과 0.25 mm의 격막두께를 갖는 격자배열구조의 텅스텐 콜리메이터를 이용하였다. 최적변수를 도출하기 위해 검출전단부의 구성 요소를 변화시키면서 기하효율과 공간분해 능의 Trade-Offs 절차를 사용하였다. 최적화된 검출전단부의 사전 성능평가를 위해, 펜텀의 중앙부에 크기가 각기 다르며 콜리메이터 표면으로부터 25 mm 떨어져 있는 유방암이 있고 다른 장기들로부터 나오는 방사선원에 의한 백그라운드 계수를 고려하였다. 유방암의 실제 진단 조건 하에서는 최적화된 검출전단부의 성능이 유방암의 크기와 백그라운드 계수에 따라 저하될 수 있음을 보여 주었다. 따라서 유방암 크기를 변별하는 지표로 쓰이며 검출전단부의 특성에 종속적인 공간분해 능은 유방암의 조기 진단시에는 의미가 없다는 결론을 얻었다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제30권3호
• /
• pp.237-243
• /
• 2007

방사성의약품을 이용한 핵의학적 영상기록에 있어 장기가 함유하고 있는 정보량을 최대한 묘출시켜 양질의 진단정보를 제공해야 한다는 것은 매우 중요하다. 그것을 위한 기술적인 문제를 비롯하여 장비성능의 유지관리에 많은 노력을 기울이고 있으며, 다양한 종류로 상업화되어 이용되고 있는 우수한 phantom들이 사용되고 있다. 본 연구에서 인체의 연부조직과 매우 흡사한 물리적 조건을 가지고 있으며 구입하기 쉬운 Paraffin을 이용하여 기존에 사용되고 있는 acryl thyroid phantom과 동일하게 paraffin phantom을 제작하였으며, 판매되고 있는 acryl thyroid phantom에서 측정할 수 있는 것 보다 더 높은 분해능을 측정할 수 있도록 작은 3mm와 6mm 직경의 cold area를 삽입한 paraffin thyroid phantom을 수작업으로 제작하였다. 방사성의약품 $^{99m}TcO_4$를 이용하고 pinhole collimator를 이용하여 상업화되어 사용되고 있는 acryl thyroid phantom과 본 연구를 위하여 제작한 paraffin thyroid phantom의 특성을 비교 분석한 결과 paraffin을 이용한 phantom도 상업화되어 사용 중인 acryl thyroid phantom과 동일한 물리적 특성을 유지하고, 오히려 분해능이 높은 부분을 측정할 수 있고 연부조직의 특성을 연구할 수 있는 등가물질로서 구입하기 쉽고 제작이 수월한 장점을 비롯하여 경제성이 있음을 증명하는 계기가 되었다.

• 한국소음진동공학회논문집
• /
• 제14권12호
• /
• pp.1241-1248
• /
• 2004

This paper presents an acoustic source localization technique on 2D cavity model in flow using a phased microphone array. Investigation was performed on cavity flows of open and closed types. The source distributions on 2D cavity flow were investigated in an anechoic open-jet wind tunnel. The array of microphones was placed outside the flow to measure the far field acoustic signals. The optimum sensor placement was decided by varying the relative location of the microphones to improve the spatial resolution. Pressure transducers were flush-mounted on the cavity surface to measure the near-filed pressures. It is shown that the propagated far field acoustic pressures are closely correlated to the near-field pressures and their spectral contents are affected by the cavity parameter L/D.