• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.6
• /
• pp.17-25
• /
• 2018

This study was conducted to calculate the optimum height of trees, estimating a model for the prediction of tree growth for the landscape improvement of the Gyeonghoeru area. For the verification of measures for management, this study conducted a photographic survey of the Gyeonghoeru area and used the Pressler's formula to examine the growth rate of the pine forest of Mansesan. The results of the study are as follows. First, as a result of a field survey and landscape analysis, trees in the Gyeonghoeru area are large ones with more than a diameter at breast height of 30cm, except for weeping cherry trees and persimmon trees, and especially, it is necessary to manage them or replace with small trees through the landscape of Mansesan, which screens the landscape and pruning the trees in the terraced flower garden in the north. Second, as a result of a measurement of the growth rate of trees, for 10 years on average, they grew up by 14% in source diameter and 5% in tree height 5% in south of Mansesan and by 7% in source diameter and 2.4% in tree height in the north of Mansesan. Furthermore, when a simulation was prepared based on the measured growth rate of trees, it was found out that 20 years later, on the landscape on the second floor of Gyeonghoeru, the pine forest of Mansesan would cut off the skyline of Mt. Inwang-san. Third, this study analyzed a landscape improvement simulation and proposed a plan for tree management to take a view of the landscape of the Gyeonghoeru area. This study has a significance that it drew an efficient planting maintenance policy, considering the landscape characteristics of the Gyeonghoeru area.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.5
• /
• pp.95-102
• /
• 2020

For the purpose of developing a PE fiber-reinforced highly ductile cementitious composite having high tensile strain capacity more than 2% under the condition of containing aggregates with large particle size, this study investigated the tensile behavior of composites according to the particle size and distribution of aggregates in the composite. Compared with the mixture containing silica sand of which particle size is less than 0.6 mm, mixtures containing river sand and/or gravel with the maximum particle size of 2.36 mm, 4.75 mm, 5.6 mm, 6.7 mm were considered in the experimental design. The particle size distributions of aggregates were adjusted for the optimized distribution curves obtained from modified A&A model by blending different sizes of aggregates. All the mixtures presented clear strain-hardening behavior in the direct tensile tests. The mixtures with the blended aggregates to meet the optimum curves of aggregate size distributions showed higher tensile strain capacity than the mixture with silica sand. It was also found that the tensile strain capacity was improved as the maximum size of aggregate increased which resulted in wider particle size distribution. The mixtures with the maximum size of 5.6 mm and 6.7 mm presented very high tensile strain capacities of 4.83% and 5.89%, respectively. This study demonstrated that it was possible to use coarse aggregates in manufacturing highly ductile fiber-reinforced cementitous composite by adjusting the particle size distribution.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.3
• /
• pp.72-83
• /
• 2022

This paper studied the effect on the microstructure, electrical properties, and compressive strength of cement mortar containing carbon fiber (CF) and steel fiber (SF), which are conductive materials. The resistivity of conductive fiber-reinforced cement mortar (FRCM) was measured using the 4-probe method, and the compressive strength was measured based on the compression test. Their performance was compared and reviewed with plain mortar (PM). Furthermore, the surface shape and composition of the fracture surface of the conductive FRCM were analyzed using a scanning electron microscope (SEM) and an energy disperse X-ray spectrometer (EDS). The results showed that the resistivity gradually increased as the curing time increased in all specimens, whereas the resistivity decreased significantly as the fiber volume fraction increased. Adding steel fibers up to 1.25% did not affect the resistivity of cement mortar considerably. On the contrast, the resistivity of carbon fiber was somewhat decreased even at low contents (ie, 0.1 to 0.3%), and thereafter, it was significantly decreased. The percolation threshold of the conductive CFRCM containing CF used in this experiment was 0.4%, and it is judged to be the optimum carbon fiber dosage to maximize the conductive effect while maintaining the compressive strength performance as much as possible. For the surface shape and composition analysis of conductive FRCM, the fracture surface was observed through SEM-EDS. These results are considered to be very useful in establishing the microstructure mechanism of reinforcing fibers in cement mortars.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.5
• /
• pp.452-460
• /
• 2008

Anti-foaming agents and foam fences have been used to remove the foam at the outfall of power plants, but there are some problems as consumption of maintenance costs and insufficiency of effect. Therefore, development of the methods how to remove the foam by stable coastal structure has been required. In this study, numerical simulation of air entrainment was carried out to design the submerged outlet structure for reducing foam using curtain walls. The air entrainment rate and the discharge of entrained air change according to the shape of weir and curtain wall. Hence, it is necessary to design the optimum section through comparison of each case. The optimum section which has the maximum rate of foam reduction was determined by the simulation results. In addition, it was found that the flow velocity at the submerged outlet is to be smaller than 1 m/s and the submerged depth of curtain wall is to be taller than height of the submerged outlet section.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.7
• /
• pp.1096-1103
• /
• 1999

A study was conducted to clarify the impact of recombinant porcine somatotropin (pST) on the efficiency of absorbed nitrogen use for protein deposition in growing pigs. Three levels of dietary crude protein (9.0, 11.5, 14.0% CP) were used. Each had either a sub-optimum or near optimum lysine: CP concentration (Low-lysine, 3.8 g/100 g CP and High-lysine, 5.5 g/100g CP) in order to achieve different metabolic efficiencies for nitrogen deposition (ca. 45 vs. 60%). Twelve crossbred female pigs $(59{\pm}4kg\;BW)$ were placed in metabolism cages and fitted with bladder catheters. Each pig received an excipient injection daily for the first 10-d, a pST (5 mg/d) injection for the second 10-d, and then excipient for the last 10-d. Pigs were randomly assigned to one of six dietary treatments (2 pigs/diet) and fed 4 times per d at $92g/kg\;BW^{0.75}$ $(3{\times}maintenance)$. Means for the excipient period were compared to means for the pST period. Urinary nitrogen (N) output declined in pST-treated pigs (p<0.01) irrespective of dietary protein content or lysine level. Nitrogen retention increased by an average of 11% (p<0.01) with pST treatment (726 vs. $803mg\;N/kg^{0.75}\;BW/d$). Forty-eight percent of the absorbed N was retained with Low-lysine diets, but this increased to 53% with pST injection (+11%, p<0.01). Pigs fed High-lysine diets retained 62% of absorbed N which increased to 69% with pST (+11% p<0.01). the addition of lysine improved N use by 27% (High vs. Low, p<0.01), but the effect of lysine and pST was additive (+40%). Therefore, pST improves N retention and the efficiency of apparently absorbed N use in growing pigs (>60kg). It does so with diets having the potential for either low or high efficiencies of N use (48% and 62%). More work is needed to determine if the partial efficiency of N use improves in direct proportion to pST dose since the improvement in protein deposition is a function of pST dose.

• The Plant Pathology Journal
• /
• v.24 no.3
• /
• pp.296-304
• /
• 2008

The transient and rapid expression system of a foreign protein in planta is a very useful technique in biotechnology application. We have investigated optimum condition of Agrobacterium-infiltration technique in which expression level of foreign proteins were maximized without detrimental effects on plants using GFP and Cucumber mosaic virus 2b protein, which is known as an enhancer of gene expression and a suppressor of post-transcriptional gene silencing(PTGS). The optimum expression level of both RNA and protein of GFP with minimum leaf impairment was obtained at $OD_{600}$=0.2 of Agrobactrium inocula. The steady-state levels of GFP RNA and protein generally peaked at 3 and 7 days post-infiltration(dpi), respectively. In the presence of 2b, both the magnitude and duration of GFP expression was highly increased and we could detect GFP level until 17 dpi. On the other hands, the 2b-mediated higher accumulation of foreign proteins resulted in the repression of normal leaf growth, possibly due to the limitation of supply of energy or materials required for growth maintenance. Using this Agrobacterium-infiltration system with 2b and GFP, we tested a hypothesis for the threshold model of PTGS initiation. Four GFP transgenic lines of N. benthamiana, which shows different expression level of GFP were tested to determine the threshold level for PTGS initiation. Agrobacterium-infiltration of GFP into those GFP-transgenic plants resulted in the co-silencing of the transgenic GFP. It was found that very low concentration of Agrobacterium with GFP and GFP+2b($OD_{600}$=0.002-0.02) which could not phenotypically induce an additive GFP expression, was enough to trigger PTGS pathway in all GFP transgenic plants. This strongly indicates that each GFP-transgenic plant should be expressing the transgenic GFP at its own pre-determined level and there was no buffer zone of additive GFP-expression to the threshold. In other words, the PTGS seems to be immediately activated as a self-defensive mechanism if an internal balance of gene expression is broken.

• Korean Journal of Food Science and Technology
• /
• v.36 no.6
• /
• pp.943-951
• /
• 2004

As storing ginger roots under optimum conditions takes high cost, ginger roots are commonly stored in underground tunnels where the maintenance of optimum temperature and humidity is difficult. One of the methods fur long term storage of ginger roots is freezing. The objective of this research was to evaluate effect of storage temperatures and packaging methods on the quality of minced ginger prepared with frozen stored ginger. The minced ginger prepared with frozen stored ginger at $-20^{\circ}C$ was packed in bags, glass bottles and tubes, and then stored at 5 and $-20^{\circ}C$ for quality evaluation at 4 and 15 week-intervals. The changes of surface color, total free sugars, free amino acids and volatile compounds were less in the combined treatment samples than in control during storage, regardless of the storage temperature. The tube packing was the best for maintaining quality of minced ginger during storage among tested packaging methods. Sensory results showed that the minced ginger with the combined treatment and packed in tubes could be stored at 5 and $-20^{\circ}C$ for 12 and 45 weeks, respectively, without a significant drop in palatability.

• Journal of Ginseng Research
• /
• v.12 no.1
• /
• pp.1-10
• /
• 1988

Panax ginseng seedlings were grown at various temperature regimes from 15 to $30^{\circ}C$ for 19 days under dark and the linear relationship between various regrowth efficiencies and thermal stress indices, cumulative superoptimum temperatures corrected with factors. Gross growth efficiency(shoot weight l root weight loss) was 37.5 % at the optimum temperature $15^{\circ}C$/$15^{\circ}C$, and 12.3% at the highest temperature, $30^{\circ}C$/$30^{\circ}C$ while net growth efficiency (shoot weight + Sm)l(root loss-Rm), which corrected by maintenance respiration for shoot(Sm) and root(Rm) was 39.6% and 16.7 at optimum and highest temperature respectively. All growth efficiencies showed negative correlations (p = 0.001) with all thermal stress indices and negative(p = 0.001) with shoot growth(St). When growth temperature difference in a day was nil or above $15^{\circ}C$ growth efficiency decreased greatly. Thermal stress indices showed negative correlation with root dry matter loss(RDL) but positive with Rm. St showed positive correlation with RDL. Thermal stress appeared to inhibit substrate supply for shoot growth resulting in the extremely low growth efficiency comparing with other crops that seems to be main rate limiting factor of slow growth, Thus it is necessary that growth efficiency and thermal stress must be elucidated in terms of metabolic pathway.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.16 no.2
• /
• pp.149-159
• /
• 2000

Occlusal disease is comparable to periodontitis in that it is generally not reversible. Occlusal disease, however, like periodontitis, often maintainable. It does itself to treatment and when restorative dentistry is utilized it becomes, in that sense, reversible. Moreover, a systematized and integrated approach will lead to a prognosis that is favorable and predictable. This approach facilitates development of optimum oral function, comfort, and esthetics, resulting in a satisfied patient. Such a systematized approach consists of four logical phase : (1) patient evaluation, (2) comprehensive analysis and treatment planning, (3) integrated and systematic reconstruction, and (4) postoperative maintenance. An integrated treatment plan is first developed on one set of diagnostic casts, properly mounted on a semiadjustable articulator using jaw relationship records. This is accomplished by using wax to make reconstructive modifications to the casts. These modified casts become the blueprint for planned occlusal changes and the fabrication of provisional restorations. The treatment goals are : (1) comfortably functioning temporomandibular joints and stomatognathic musculature, (2) adherence to the basic principle of occlusion advocated by Schuyler, (3) anterior guidance that is in harmony with the envelope of function, (4) restorations that will not violate the patient's neutral zone. This report shows the treatment procedures for a patient whose mandibular position has been altered due to posterior bite collapse. Migration of the maxillary anterior teeth had occurred, and the posterior occlusal contacts showed pathologic interference. Precise diagnosis using mounted casts was executed and prosthodontic reconstruction by the aid of an unconventional orthodontic correction on maxillary flaring was planned. An unconventional orthodontic correction can be accomplished by using preexisting natural teeth, which can be modified for use in active tooth movement or splinted together for orthodontic anchorage. This technique has an advantage over conventional fixed appliance orthodontic therapy because it can accomplish tooth movement concurrently with restorative and periodontal therapy. On occasion, minor tooth movement can be necessary to achieve the optimum occlusal scheme, crown form, and tooth position for the forces of occlusion to be displaced down the long axis of the periodontally compromised teeth. Once the occlusion, periodontal health, and crown contours for the provisional splinted restoration are acceptable, the final splinted restoration can be similarly fabricated, and it becomes an excellent orthodontic retainer.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.1
• /
• pp.48-54
• /
• 2019

This research was carried out to investigate the plant growth, inorganic ion and amino acid content characteristics in a halophyte, Suaeda glauca, under different NaCl concentrations for cultivating in the reclaimed land. S. glauca was hydroponically cultivated under 0, 50, 100, 200, 300 and 400 mM NaCl concentrations with Hogland's nutrient solution. To evaluate growth response under different NaCl concentrations, plant height and number of branches, dry weight, Fv/Fm value, and photosynthetic efficiency were investigated. To find out physiological characteristic, inorganic ion contents and amino acids in the plant were evaluated. The optimum concentration of NaCl for plant growth were 50 mM. The plant growth were gradually decreased in the concentration ranged from 100 to 400 mM. As increasing of NaCl concentration, Na ion was increased, but K, Ca, Mg ions were decreased in the plant. The amino acid contents were varied due to NaCl concentrations, but most of amino acids content in total plant was the lowest at 50 mM. Conversely, proline was exceptionally high at 50 mM of NaCl concentration. The Fv/Fm value was the highest at 50 mM of NaCl concentration. From these results, the optimum salt concentration for the growth of S. glauca was 50 mM, but the plant seems to adapt in a variety of salt environments in view of the change of ions and amino acids depending on salt concentration and the maintenance of photosynthetic efficiency even under high salt condition.