• Journal of applied mathematics & informatics
• /
• v.32 no.3_4
• /
• pp.539-546
• /
• 2014

This paper introduces the approximation and a proposed method to deal the optimum location network selection problem such that the total cost is minimized. For the proposed method, we derived a feasible solution and the variance. To compare the performances of the approximation and the proposed method, computer simulation is also implemented. The result showed the solutions being optimum with 74% for the proposed method and 57% for the approximation. When the solutions is not optimum, maximum and average deviations are below 4% and 2% respectively. The results indicate a slightly better performance of the proposed method in a certain case.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.5
• /
• pp.1989-1998
• /
• 2013

As the importance of 'bike revitalization' has been emphasized in our society, many cities around the world put enormous efforts to create a bike-oriented transportation system. None the less, the results were not much productive and effective. In this study, to decide the location and number of the bike-parking facilities, the heuristic P-median algorithm has been applied with and without budget constraints. A test network with 30 candidate locations (centroids) were employed. The results show that the optimum number of bike parking lots with and without the budget limits are 9 and 20, respectively. Since the optimum locations determined in this study were congruous with the actual bike parking lots with high utilization rates, it is expected that the proposed methods can be applied for determining the optimum locations of the bike parking facilities elsewhere. Some limitations and future research agenda have also been discussed.

• Earthquakes and Structures
• /
• v.25 no.5
• /
• pp.359-367
• /
• 2023

High-rise structures are considered as symbols of economic power and leadership. Developing countries like India are also emerging as centers for new high-rise buildings (HRB). As the land is expensive and scarce everywhere, construction of tall buildings becomes the best solution to resolve the problem. But, as building's height increases, its stiffness reduces making it more susceptible to vibrations due to wind and earthquake forces. Several systems are available to control vibrations or deflections; however, outrigger systems are considered to be the most effective systems in improving lateral stiffness and overall stability of HRB. In this paper, a 42-storey RCC HRB is analyzed to determine the optimum position of outriggers of different materials. The linear static analysis of the building is performed with and without the provision of virtual outriggers of reinforced cement concrete (RCC) and pre-stressed concrete (PSC) at different storey levels by response spectrum method using finite element based Extended3D Analysis of building System (ETABS) software for determining responses viz. storey displacement, base shear and storey drift for individual models. The maximum allowable limit and percentage variations in earthquake responses are verified using the guidelines of Indian seismic codes. Results indicate that the outriggers contribute in significantly reducing the storey displacement and storey drift up to 28% and 20% respectively. Also, it is observed that the PSC outriggers are found to be more efficient over RCC outriggers. The optimum location of both types of outriggers is found to be at the mid height of building.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.4
• /
• pp.973-985
• /
• 2014

This study helps to select the criteria for the location automotive repair shops and suggests the optimum location. The weights representing relative importance of each criterion were calculated by using AHP(Analytic Hierarchy Process). Actually most of the location of automotive repair shops have been selected depending on decision makers' experience though very high initial costs are incurred. Also while studies have been done on the location of the smaller shops whose initial costs are low and service activities are simple, studies and cases on the location of automotive repair shop were not done and found before. This study helps to draw the weights of the criteria for the location of each one of grade 1, 2, 3 repair shop and compare and analyze them. As a result, it is found out that there is some differences between factors significantly considered when selecting the location of each repair shop. This study has significance of suggesting scientific methods to reduce risk in the decision making related to location of repair shop.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.30 no.1
• /
• pp.1-9
• /
• 2018

Thermal performance of a heat sink for an inverter power stack was analyzed in terms of array and installation location of an Insulated Gate Bipolar Transistor (IGBT). Thermal flow around the heat sink was calculated with a numerical model that could simulate forced convection. Thermal performance was calculated depending on the array and location of high- and low-power IGBTs considering the maximum temperature of IGBT. The optimum array and installation location were found and causes were analyzed based on results of numerical analysis. For the numerical analysis, experiment design considered the installation location of IGBT, ratio of heat generation rates of high- and low-power IGBTs, and velocity of the inlet air as design variables. Based on numerical results, a correlation that could calculate thermal performance of the heat sink was suggested and the maximum temperature of the IGBT could be predicted depending on the installation method.

• Journal of Advanced Navigation Technology
• /
• v.15 no.5
• /
• pp.839-844
• /
• 2011

Various technologies such as infrared light, ultrasonic waves, RFID, GPS, UWB, and signal indicators have been incorporated in the location tracking system. However, such pre-existing systems require location recognition in shadow areas. This study proposes a location tracking system that utilizes Cooperative Spectrum Sensing. Cooperative Spectrum Sensing is not only able to track the location and path of moving objects but also recognize when objects breakaway from the path set by sensors and guide them back. In addition, it has the advantage of being more efficient in terms of frequency usage. It is able to automatically fix power transmission and frequency modulation for transmission cognitive users to an optimum level within the range that does not cause interference for primary users.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.1
• /
• pp.91-105
• /
• 2008

Nowadays, circulation industry is taking charge of important role in improvement of competitive power on the manufacturing industry and public welfare increase of consumer, price stabilization, employment creation and so on. A lot of research have been progressing for formation of total circulation complex, but decision making for selection of location on some facility is only calculated the optimum value when correct data values are inserted. However, a lot of decision making is accomplished in situation that have little knowledge of objective and constraints and as real world is also evaluated inclusive of analyst's subjectivity about variable, indefinite and fuzzy part, so it is decreasing a reliability on evaluation result and complicating objective evaluation on various effect and negative impact. Accordingly, from under like this situation, this study is to develop location decision model of circulation complex using fuzzy theory from the intention for the most reasonable decision making in fuzzy situation based on decision making problem on conventional location and size decision that did to be satisfactory constraints necessarily.

• Structural Engineering and Mechanics
• /
• v.17 no.5
• /
• pp.611-626
• /
• 2004

On the basis of a structural analysis of radial gate (i.e. Tainter gate), the current paper focuses on weight minimization according to the location of the arms on a radial gate. In spite of its economical significance, there are hardly any previous studies on the optimum design of radial gate. Accordingly, the present study identifies the optimum position of the support point for a radial gate that guarantees the minimum weight satisfying the strength constraint conditions. This study also identifies the optimum position for 2 or 3 radial arms with a convex cylindrical skin plate relative to a given radius of the skin plate curvature, pivot point, water depth, ice pressure, etc. These optimum designs are then compared with previously constructed radial gates. Local genetic and hybrid-type genetic algorithms are used as the optimum tools to reduce the computing time and enhance the accuracy. The results indicate that the weights of the optimized radial gates are appreciably lower than those of previously constructed gates.

• Journal of Industrial Technology
• /
• v.27 no.A
• /
• pp.141-147
• /
• 2007

In this paper, we define the multi-states exponential cell resident time mobility model for describing the mobility characteristics of mobile user and analyzed the total cost of the hybrid method using multi-states cell resident time. Generally, the mobile user has three states for its movement, such as staying, walking and driving. This multi-states cell resident time based hybrid method reflects the movement characteristics of mobile user and adapts the location update period according to the states of mobility speed. As a results of the performance analysis, we can get the optimum parameters of the hybrid method for multi-states based mobile users.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.18 no.2
• /
• pp.163-170
• /
• 1998

This research was carried out to determine the sowing rate and row distance in Edirne province of Thrace Region in 1993 season. According to the results of some important characteristics of sorghum and their interactions were statistically significant. In Havsa and Uzunk'opr& the plant height were 70.36 and 95.28cm respectively, within each sowing rate were not significant. Number of tiller were not significant in distance and individual location Increasing the sowing rate kom I to 3 kg/da and the location Havsa and Umnkoprii resulted in significant stem diameter variation. Variation in 6-esh fodder yield has been found significant in row distance sowing rate and location 1 kglda seed rate with 30 cm row distance together are recommended to the farmer community to obtain the optimum profit.