• Proceedings of the Optical Society of Korea Conference
• /
• 1991.06a
• /
• pp.98-101
• /
• 1991

The As2S3 thin film has a characteristics of optical modulation in both amplitude and phase. Since the As2S3 thin film can be used as a real-time reconfigurable optical filter, the fSDF filter can be optically fabricated on it. According to the modulation characteristics of the As2S3, the optimal fSDF filter recorded on this thin plate has the form of continuous amplitude and binary phase. Computer simulation and optical experiments on the optical pattern classification show that the As2S3 is suitable for the optical fSDF filter.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.306-311
• /
• 2003

In this paper, we modeled the incident beam in order to analyze and evaluate the optical thin film device for wavelength division multiplexing in optical telecommunication network. As applied ray tracing method to the optical path, we were compared the accuracy of coupling efficiency simulated by two modeling methods. In the results of sinulation, ceil modeling method was preferred to annual modeling method in micro-optic device because of accuracy for coupling efficiency and Gaussian intensity distribution. In the results of optimal simulation for optical device using thin film filter, the distance (d1) between optical fiber and GRIN lens, the distance (d2) between GRIN lens and thin film filter and the coupling efficiency were 0.24 mm, 0.25 mm and -0.11 ㏈ respectively. As d2 was displaced at 0.25 mm and d1 was varied in order to evaluate the optimal value, d1 and maximum coupling efficiency were 0.24 mm and -0.35㏈, respectively. Then the results of experiment were corresponded to that of optimal simulation by cell modeling and it was possible to analyze the performance for optical device using thin film filter by the simulation.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.07a
• /
• pp.207-208
• /
• 2008

In this study, we present the error compensation effect of optical monitoring methods for apply of narrow band pass filter and IR-cutoff filter. Then we show the optimization process for apply of optical monitoring methods.

• Korean Journal of Optics and Photonics
• /
• v.14 no.5
• /
• pp.555-564
• /
• 2003

WDM thin film filters for fiber optical communication were designed using Fabry-Prot type multiple cavity filters and an equivalent thin film technique. As the number of cavities in multiple cavity filters increases, it becomes difficult to design the filters due to a great number of variables (the number of cavities, period of reflectors, order of spacers). To solve the problem of design, we treated the fewest variables, regarding symmetrical thin films as equivalent layers, and we applied structural and numerical formulas based on an analysis method of multiple cavity filters. The equivalent thin film technique was able to provide systematic and quantitative design of the WDM thin film filters.

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.02a
• /
• pp.239-240
• /
• 2009

• Proceedings of the Optical Society of Korea Conference
• /
• 2005.02a
• /
• pp.130-131
• /
• 2005

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.6
• /
• pp.677-684
• /
• 2004

Plastic and creep deformations of solder joints during thermal cycling are the main factors of misalignments and power losses in optical telecommunication components. Furthermore, the increased mismatch between solder Joint-bonded areas may cause severe failure in the components. Darveaux's creep model was implemented into a finite element program (ABAQUS) to simulate creep response of solder. Based on the finite element results, thermal fatigue reliability was predicted by using various fatigue life prediction models. Also, the effects of ramp conditions, dwelling time, and solder joint-embedding materials on the reliability were investigated under the thermal cycling conditions of the Telcordia schedule (-40∼75$^{\circ}C$).

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.3
• /
• pp.400-407
• /
• 1987

Thin film filter type 4-channel wavelength division multiplexing(WDM) device was designed and fabricated for the application in optical subscriber loop system. It has multi-mode fiber pigtails and four wavelength division consisting of 0.81, 0.89, 1.2 and 1.3 um. The evaluated performances are 1-2d B of insertion loss(connector loss excluded)and 30-35d B of crosstalk attenuation for all channels. The performance of the fabricated device was tested in the wideband optical transmission experiment, where the SNR degradation due to the crosstalk of the device was found to be within a measurement error.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.510-514
• /
• 1997

The thin film that is electrically conductive and optically transparent is called conductive transparent thin film. ITO(Indium-Tin Oxide) which is a kind of conductive transparent thin film has been widely used in solar cell, transparent electrical heater, selective optical filter, FDP(Flat Display Panel) such as LCD(Liquid Crystal Display), PDP(Plasma Display Panel) and so on. Especially in PDP, ITO films is used as a transparent electrode in order to maintain discharge and decrease consumption power through the improvement of cell structure. In this study, we prepared ITO by reactive r.f. sputtering with indium-tin(Sn 10wt%) alloy target instead of indium-tin oxide target. The ITO films deposited at low temperature 15$0^{\circ}C$ and 8% $O_2$. Partial pressure showed about 3.6 Ω/$\square$. At the end of firing, the resistance of ITO was decreased, the optical transparence was improved above 90%.

• ETRI Journal
• /
• v.28 no.1
• /
• pp.103-106
• /
• 2006

We have fabricated a planar lightwave circuit (PLC) hybrid-integrated optical sub-assembly of a triplexer using a thin film filter (TFF)-attached wavelength division multiplexer (WDM) and photodiode (PD) carriers. Two types of TFFs were attached to a diced side of a silica-terraced PLC platform, and the PD carriers with a $45^{\circ}$ mirror on which pin-PDs were bonded were assembled with the platform. A clear transmitter eye-pattern and minimum receiver sensitivity of -24.5 dBm were obtained under 1.25 Gb/s operation for digital applications, and a second-order inter-modulation distortion (IMD2) of -70 dBc was achieved for an analog receiver.