• 제목/요약/키워드: optical sensitivity

검색결과 875건 처리시간 0.026초

SOI 슬롯 광 도파로 기반 단일 및 삽입-분기 채널 링-공진형 바이오·케미컬 집적광학 센서의 제원에 대한 감도 해석 (Sensitivity Analysis for Specifications of Silicon-on-Insulator (SOI) Slot Optical Waveguide-based Single and Add-drop Channel Ring-resonant Biochemical Integrated Optical Sensors)

  • 장재식;정홍식
    • 센서학회지
    • /
    • 제31권2호
    • /
    • pp.107-114
    • /
    • 2022
  • The effects of ring radius and coupling spacing on the free spectral range (FSR), full width at half maximum (FWHM), quality factor, and sensitivity of single-channel and add-drop channel slot ring resonators were systematically investigated using FIMMPROP and PICWAVE numerical software. The single-channel ring resonator exhibited better characteristics, namely, a wider FSR and narrower FWHM compared with the add-drop structure; thus, it was evaluated to be more suitable for biochemical sensors. The FSR, FWHM, quality factor, and sensitivity for a single channel ring resonator with a radius of 59.4 ㎛ and coupling gap of 0.5 ㎛ were 2.4 nm, 0.087 nm, 17677, and 550 [nm/RIU], respectively.

포토다이오드의 정전용량에 따른 버스트모드 광 수신소자의 수신감도 연구 (Study on Sensitivity of Burst-Mode Optical Receiver Depending on Photodiode Capacitance)

  • 이정문;김창봉
    • 한국광학회지
    • /
    • 제19권5호
    • /
    • pp.343-348
    • /
    • 2008
  • 본 논문은E-PON용 버스트모드 광 수신소자를 개발하여 FTTH의 상용화에 기여하고자 연구되었다. 수신소자는 1.25 Gb/s 데이터 전송속도에서 E-PON의 10, 20 Km OLT Rx규격에 만족할 수 있도록 수신감도를 향상 시키기 위해 정전용량을 최소화하여 제작하였다. 수신감도는 비트 오류율이 $10^{-12}$이고 PRBS가 $2^5-1$일 때 -26 dBm, loud/soft ratio는 23 dB으로 측정되었다. Preamble time과 guard time은 각각 102.4 ns(128 bit)로 설정하였다. 일반적으로 광 수신소자에 주로 사용되는 정전용량이 0.53 pF인 포토다이오드와 정전용량이 최소화된 0.26 pF인 포토다이오드를 비교한 결과 정전용량이 0.26 pF인 포토다이오드로 제작된 버스트모드 광 수신소자 가 수신감도는 0.7 dBm, 대역폭은 190 MHz 더 향상되었다.

주광이 무선 광통신 시스템의 수신 감도에 미치는 영향 (Impact of Solar Irradiance on the Receiver Sensitivity of Free-Space Optical Communication Systems)

  • 박기홍;김훈
    • 한국광학회지
    • /
    • 제31권6호
    • /
    • pp.259-267
    • /
    • 2020
  • 실외에서 운용되는 무선 광통신 시스템의 수신기는 태양광에 직·간접적으로 노출되기 마련이다. 본 논문에서는 주광이 무선 광통신 시스템의 수신 감도에 미치는 영향을 정량적으로 분석하였다. 이를 위하여 방사 조도 측정치를 활용하여 지상에 위치한 수신기에 특정 시야각으로 직접 또는 간접적으로 입사하는 단위 면적당 태양광 전력 스펙트럼 밀도를 얻었고, 이 값을 이용하여 세기 변조/직접 검출 및 코히어런트 시스템의 성능 열화를 계산하였다. 분석 결과 주광이 수신기에 간접적으로 인가되는 경우 수신 감도 페널티가 시스템 종류에 관계없이 1.3 dB 이하였으나, 직접적으로 인가되는 경우에는 30 dB 이상의 매우 큰 수신 감도 열화가 발생하였다. 또한 이러한 수신 감도 열화는 편광자 사용 또는 광학 필터 대역폭 조절에 의해서도 거의 경감되지 않았다.

Optical Disk Drive Servo System Using Dual Disturbance Observer

  • Lee, Sang-Han;Jeong, Dong-Seul;Chung, Chung-Choo
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2005년도 ICCAS
    • /
    • pp.2087-2092
    • /
    • 2005
  • Using disturbance observer (DOB) is effective in enhancing the performance of dynamic system in the presence of disturbances. Recently the definition of disturbance has been expanded to modeling uncertainty including parameter variation, internal disturbance. Various structures of DOB have been proposed to improve sensitivity of system for better disturbance rejection performance. However in the case of improvement of sensitivity function, it tends to bring poor transient response due to cross-coupling and phase lag. Furthermore it could be very sensitive to measurement noise due to increased peak of complementary sensitivity function. In this paper, a dual disturbance observer (Dual-DOB) is proposed to reduce the effect of such cross-coupling. It is possible for us to improve the sensitivity function with additional external DOB with hardly affecting complementary sensitivity function. Thus it is able to have robustness against measurement noise. Since we are able to design DOBs of internal and external loop independently, we could prevent transient response quality from degrading while improving the sensitivity function. The proposed Dual-DOB is applied to a commercial optical disk drive tracking servo system. The experimental result shows that the Dual-DOB is an effective method in rejecting the disturbance as well as improving the tracking performance.

  • PDF

집적광학 바이오케미컬 센서에 적합한 Si3N4/SiO2 슬롯 및 릿지-슬롯 광 도파로 제원 최적화 및 감지도 해석 (Specification optimization and sensitivity analysis of Si3N4/SiO2 slot and ridge-slot optical waveguides for integrated-optical biochemical sensors)

  • 장재식;정홍식
    • 센서학회지
    • /
    • 제30권3호
    • /
    • pp.139-147
    • /
    • 2021
  • Numerical analysis was performed using FIMMWAVE to optimize the specifications of Si3N4/SiO2 slot and ridge-slot optical waveguides based on confinement factor and effective mode area. The optimized specifications were confirmed based on sensitivity in terms of the refractive index of the analyte. The specifications of the slot optical waveguide, i.e., the width of the slot and the width and height of the rails, were optimized to 0.2 ㎛, 0.46 ㎛, and 0.5 ㎛ respectively. When the wavelength was 1.55 ㎛ and the refractive index of the slot was 1.3, the confinement factor and effective mode area of 0.2024 and 2.04 ㎛2, respectively, were obtained based on the optimized specifications. The thickness of the ridge and the refractive index of the slot were set to 0.04 ㎛ and 1.1, respectively, to optimize the ridge-slot optical waveguide, and the confinement factor and effective mode area were calculated as 0.1393 and 2.90 ㎛2, respectively. When the confinement coefficient and detection degree of the two structures were compared in the range of 1 to 1.3 of the analyte index, it was observed that the confinement coefficient and sensitivity were higher in the ridge-slot optical waveguide in the region with a refractive index less than 1.133, but the reverse situation occurred in the other region. Therefore, in the implementation of the integrated optical biochemical sensor, it is possible to propose a selection criterion for the two parameters depending on the value of the refractive index of the analyte.

정다각형 배열 광마우스를 이용한 최소 자승 속도 추정법에 대한 민감도 분석 (Sensitivity Analysis of Least Squares Velocity Estimation Using a Regular Polygonal Array of Optical Mice)

  • 김성복;정일화;이상협
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
    • /
    • pp.145-146
    • /
    • 2007
  • This paper presents the sensitivity analysis of the leasst qsuares velocity estimation of an omnidirectional mobile robot using a regular polygonal array of optical mice. First, the velocity kinematics from a mobile robot to an array of optical mice is derived as an overdetermined linear system. Then, for a given set of optical mouse readings, the least squares velocity estimation of a mobile robot is obtained as the simple average. Finally, the sensitivity analysis of the proposed least squares velocity estimation to imprecise installation is made.

  • PDF

Enhanced Optical Generation of 42.7 Gbps Phase Shaped Binary Transmission

  • Ducournau, Guillaume;Latry, Olivier;Ketata, Mohamed
    • ETRI Journal
    • /
    • 제28권6호
    • /
    • pp.826-829
    • /
    • 2006
  • A novel method for optical phase shaped binary transmission (PSBT) generation has been recently reported and experimentally evaluated. An amelioration of the optical signal-to-noise ratio (OSNR) sensitivity of the optical PSBT modulation format is proposed with the application of the concepts of enhanced electrical PSBT signal generation. Enhanced optical PSBT is proposed here as a modulation format producing a 0.7 dB gain in OSNR sensitivity compared to OPSBT, while maintaining a good robustness to group velocity dispersion: 100 ps/nm for enhanced optical PSBT and 120 ps/nm for optical PSBT, compared to 50 ps/nm for standard NRZ signals.

  • PDF

광섬유 압력센서 (Fiber optic pressure sensor)

  • 이기완;배준형
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
    • /
    • pp.640-643
    • /
    • 1996
  • In this paper, a sensitivity of the fiber optic pressure sensor in water is demonstrated. A single mode optical fiber Mach-Zehnder interferometer used to detect the change in optical path length produced by the change of fiber optic strain in water. The sensitivity with this system measured 100.mu.psia through an experiment in the static response.

  • PDF

A Design and Fabrication of 565 Mbit/s Optical Fiber Transmission Link

  • 박문수;황준암
    • ETRI Journal
    • /
    • 제9권2호
    • /
    • pp.24-35
    • /
    • 1987
  • A Design and Fabrication of 565 Mbit/s Optical Fiber Transmission Link We calculated the transfer functions of optical channel components and formulated the optimum transfer function of optical receiver for optical transmission to show a design rule of fiber optical link for digital transmission. And we evaluated various causes of sensitivity degradation to determine the receiver specification. Also we fabricated and demonstrated a 565Mbit/s single mode fiber optic link, 27km, to show the practicality of designed fiber optic link. The output power of the transmitter was above -3dBm, and the sensitivity of the optical receiver was -37.8dBm which is the same value we expected. Also the dynamic range was more than 25dB.

  • PDF