• Optical Science and Technology
• /
• v.5 no.3
• /
• pp.7-15
• /
• 2001

• Proceedings of the Optical Society of Korea Conference
• /
• 2007.02a
• /
• pp.96-97
• /
• 2007

• Proceedings of the Optical Society of Korea Conference
• /
• 2007.07a
• /
• pp.131-132
• /
• 2007

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.4 s.97
• /
• pp.64-70
• /
• 1999

A new multi-beam optical system is presented on the grounds of tri-positioning systems in this paper. The system has been developed to improve the data transfer rate for the optical disk system. The actuating system is composed of a tracking and focusing actuating system basically and a newly developed beam rotating actuator. The beam rotating actuator is employed in a multi-beam optical system to trace more than one track simultaneously. The multi-beam optics is established through the optical simulation and several experimental trials. The differential phase tracking method is used in the tracking error signal detection based on the only one beam spot. We also analyze the characteristics of multi-beam optical system. The experimental result shows that the multi-beam positioning system has performance adequate to the multi-beam optical disk system.

• Korean Journal of Optics and Photonics
• /
• v.8 no.1
• /
• pp.26-30
• /
• 1997

A wide dynamic range heterodyne interferometer scheme using intermode beat between a stabilized, dual frequency He-Ne laser beam has been applied for a measurement of optical thickness of an optical medium. Resolution of the optical thickness measurement is about $\pm$ 1.74 ${\mu}{\textrm}{m}$. Using this technique, we are able to determine the optical thickness of an organic dye film. We also obtain a map of the optical thickness variations over a surface of the film

• Transactions of the Society of Information Storage Systems
• /
• v.2 no.3
• /
• pp.201-207
• /
• 2006

Information storage devices have been studied to increase the storage capacity and the data transfer rate as well as to decrease the access time and their physical sizes. Optical information storage devices have been achieved high-capacity by reducing optical spot size remarkably due to the development of Blue-ray technology. Optical information storage devices usually use 1.2mm-thick polycarbonate(PC) media to get high enough stiffness. However, it would be better if we can decrease the thickness of a disk for achieving thinner device while keeping the capacity as large as possible. Decreasing the thickness of the storage media makes it difficult to read and write data because it increases the transverse vibration of the rotating disk due to the interaction with surrounding air and the vibration characteristics of thin flexible disk itself, Therefore, a special design based on the fluid mechanics is required to suppress the transverse vibration of the disk in non-contact manner so that the optical pickup can read/write data successfully. In this study, a curved wall is proposed as a stabilizer to suppress the transverse vibration of a $95{\mu}m$-thick PC disk. The characteristics of disk vibration due to a curved wall have been studied through numerical and experimental analysis from the fluid mechanics point of view. The proposed shapes are possible candidates as stabilizers to suppress the transverse vibration of a flexible disk which rotates at high speed.

• Korean Journal of Optics and Photonics
• /
• v.12 no.5
• /
• pp.394-400
• /
• 2001

We studied thermal diffusion properties diffusion properties of multi-layered Ge-Sb-Te alloy thin films for optical recording media by solving the thermal equation. Based on the numerical analysis of optical energy distribution and absorption inside multi-layered films including temperature gradient and heat transfer simultaneously, we proposed the optimum parameters of the input laser power and the multi-layer structure as follow. i) Input laser power is 18 mW, ii) laser exposure time is 60 ns, iii) the thicknesses of the lower and the upper ZnS-SiO$_2$are 140 nm and 20~30 nm respectively, and iv) thickness of Ge-Sb-Te recording film is 20 nm.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.7
• /
• pp.261-272
• /
• 2003

An Ethernet PON(Passive Optical Network) is an economical and efficient access network that has received significant research attention in recent years. A MAC(Media Access Control) protocol of PON , the next generation access network, is based on TDMA(Time Division Multiple Access) basically and can classify this protocol into a fixed length slot assignment method suitable for leased line supporting QoS(Quality of Service) and a variable length slot assignment method suitable for LAN/MAN with the best effort. For analyzing the performance of these protocols, we design an Ethernet PON model using OPNET tool. To establish the maximum efficiency of a network, we verify a MAC protocol and determine the optimal number of ONUs(Optical Network Unit) that can be accepted by one OLT(Optical Line Terminal) and propose the suitable buffer size of ONU based on analyzing the end-to-end Ethernet delay, queuing delay, throughput, and utilization.

• Journal of Magnetics
• /
• v.1 no.2
• /
• pp.86-89
• /
• 1996

The dc magnetron sputter deposited (Pt/Co/Pt/Ni) multilayers which exhibited Curie temperatures in the range of 150-$300^{\circ}C$ were studied as possible alternative multilayers for magneto-optical recording to the widely studied Co/Pt, whose Curie temperatures are in the range of 200~$400^{\circ}C$. The Coercivities of these multilayers were between 450 Oe and 800 Oe. These multilayers exhibited comparable magnetic and magneto-optical properties to Co/Pt multilayers with enhancement of the Kerr rotation at lower wavelengths and negligible Kerr ellipticity over a wide range of the spectrum (4000~7000$\AA$ ).

• 한국정보통신설비학회:학술대회논문집
• /
• 2003.08a
• /
• pp.346-348
• /
• 2003

본 논문에서는 플라스틱 광섬유용(POF) 광커넥터와 광송수신모듈을 설계. 제작하여 특성을 평가하였다. 650nm와 850nm POF 광커넥터는 광학적, 기계적, 환경적 신뢰성 시험을 통해 안정성을 확증할 수 있었다. POF 광송수신모듈은 1.25Gbps와 155Mbps급의 SC, RJ-45 형태의 구조로 제작되었고, 이를 적용하여 S/W Hub 및 광전 Outlet, Media Converter등을 구현하였다.