• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1495-1496
• /
• 2008

The Ceramic Metal Halide lamp is different from optical characteristic on shapes of arc-tube and driving method of ballast. In this paper, we measured optical characteristics of the Ceramic Metal Halide lamp that uses arc tubes which are spherical and cylindrical shapes, and analyzed the Ceramic Metal Halide lamp connecting ballast that is electronic and magnetic types through the lamp measurement system that is given for stabilization period of fifteen minutes. In result, the arc-tube of spherical shape is more improvement in the optical properties than the arc tube of cylindrical shape, moreover, the electronic ballast is more efficient than the optical properties of the magnetic ballast.

• 한국정밀공학회지
• /
• 제27권12호
• /
• pp.9-14
• /
• 2010

Using an IR (infrared) optical system of observation and research were performed long before. Nowadays satellites equipped with IR optical system observe the earth and universe. In this paper, we developed the IR optical system for main payload of the STSAT-3 (Science and Technology Satellite -3). We studied the ultra precision machining technique to fabricate FPL-53 lenses which is the IR optical material for space observation camera of the STSAT-3. DOE (Design of Experiment) was used to find best machining characteristic for FPL-53. Finally we fabricated FPL-53 aspheric lens with the form accuracy of P-V $0.36\;{\mu}m$.

• 정보저장시스템학회논문집
• /
• 제10권1호
• /
• pp.19-22
• /
• 2014

Optical nonlinear property is utilized to the wave generation, generating the beam at intended wavelength, and optical computing systems. The genetic material, which is the DNA with helical structure in nano-scale, is fascinating for optics communities due to artificially controllable sequence that determines the physical and chemical property. Nonlinearity of DNA was investigated by the four wave mixing experiment, which is with two incident beams located at 1550nm and 1650nm. The four output beams including incident beams are emitted from genetic material such as 1461nm and 1763nm by nonlinear characteristic. The 1461nm beam which is generated by four wave mixing phenomena was observed by optical spectrum analyzer.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권5호
• /
• pp.272-277
• /
• 2006

The present study is devoted to investigate numerically the optical characteristics of multi-layer thin film structures such as $Si/SiO_2\;and\;Ge/Si/SiO_2$ by using the characteristics transmission matrix method. The reflectivity and the absorptivity rate for thin film structures are estimated for different incident angles of rays and various film thicknesses. In addition, the influence of wavelength on optical characteristics related to complex refractive index is examined. It is found that such wave-like characteristics are observed in predicting reflectivities and depends mainly on film thickness. Moreover, the present study predicts the film thickness for ignoring wave interference effects, and it also discusses the fundamental physics behind optical and energy absorption characteristics appearing in multi-layer thin film structures.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.798-800
• /
• 2003

Recently, in optical storage device technical trends, the size of optical drive is slimmer to adopt notebook computer and the power of actuator is higher to achieve the high transfer rate. However, these trends of optical disc drives tend to increase the temperature of the actuator part, it causes some problems on the performance of optical parts - the resonance frequency of the actuator is down to lower band and the objective lens, coil and magnet are easily damaged. In this study, to overcome these thermal problems, the numerical simulations of heat transfer were performed. As the result of simulations, the thermal characteristic of the hybrid actuator is better than the previous design. And, it shows the good dynamic performance in experiment.

• 한국항공우주학회지
• /
• 제37권5호
• /
• pp.470-475
• /
• 2009

본 논문은 헤드 트랙커(Head Tracker) 시스템에 패턴 매칭을 적용한 연구이다. 제안하는 알고리즘은 패턴을 통하여 헤드 트랙커의 초기자세를 빠르고 쉽게 획득하는 것이다. 광학 방식 헤드 트랙커는 적외선 LED(특징점)를 헬멧에 부착하고, 스테레오 카메라로 영상을 획득한다. 영상 분석시 발생하는 특징점간 거리 오차율을 바탕으로 패턴을 이루며 특징점을 부착한다. 특징점간 거리를 이용해 패턴 분석을 하고, 획득된 패턴을 바탕으로 특징점에 고유 번호를 부여한다. 맵 데이터와 특징점 고유 번호를 비교함으로써 헤드 트랙커의 초기자세를 추정한다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.159-162
• /
• 2009

Surface lighting using OLEDs for desk/task lighting has been analyzed its electrical and optical characteristic with a fluorescent lamp which has triple wavelength peak. We have confirmed the good possibility of OLEDs for desk/task lighting. Our engineering sample which has fabricated by co-worker has its characteristics which are luminous efficacy 11.781m/W at 509mW, CRI Index 75, CCT 4479K, CRI coordinate x=0.378, y=0.4547, respectively. Addinationly another OLEDs samples are used for compartive analysis in view of desk/task lighting.

• 한국정보통신학회논문지
• /
• 제14권7호
• /
• pp.1687-1692
• /
• 2010

본 논문에서는 Blu-ray 디스크의 기록을 위한 Laser Diode의 온도특성을 고려한 기록품질의 개선방법에 대해 연구했다. 주변 온도변화에 따라 Blu-ray Laser Diode는 전류-전압 관계로부터 미분저항이 변화하게 되는데 이러한 미분저항이 저온에서 기록품질에 미치는 영향에 대해 분석하고 개선하는 방법을 제안한다.

• 한국전기전자재료학회논문지
• /
• 제19권2호
• /
• pp.200-206
• /
• 2006

An electric power efficiency of electrodeless fluorescent lamp depens on a big relative property of gas, gas pressure, lamp formation, ingredients of magnetic substance and shape and action frequency etc. in lamp. We used magnetic substance that opens self-examination material of electrodeless fluorescent lamp antenna. We used Mn-Zn type as the Ferrite. We have examined resistance, impedance and Q-factor's frequency characteristic by ferrite. Coil turns were changed from 13 to 15 turns to recognize brightness change of lamp by winding number. Optical equipment (LS-100) was used to measure brightness. We could know Q-factor's difference according to material is important part of antenna design. When an electrodeless fluorescent lamp was made using T company's PE22, it showed the highest brightness. As number of winding is increased the brightness increased, and starting characteristic became good.

• 한국자기학회지
• /
• 제4권3호
• /
• pp.249-255
• /
• 1994

광자기 기록매체의 구조를 유전체층과 반사층을 이용하여 다층화 함으로써 자기광학 효과를 증대할 수 있다는 것은 알려진 사실이다. 본 연구에서는 희토-천이금속 합금박막의 대표적인 재질인 TbFeCo 를 기록층으로 한 다층구조에서 Kerr 회전각, 타원율, 반사도 및 Figure of merit을 Characteristic Matrix 를 사용하여 컴퓨터 프로그램으로 작성하고 이론적 계산을 하였다. Photodiode의 Shot Noise만 고려하였을 때 SNR과 비례관계에 있는 Figure of Merit과 반사도를 기준으로 하여 Bilayer, Trilayer 및 Quadrilayer 구 조에서 최적의 두께조합을 결정하였다.