• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.90-96
• /
• 2020

In this era, intelligence is considered a major factor in the defense sector. As a result, securing technology for weapons systems for monitoring and reconnaissance of companies has become inevitable. As a result, UAVs (Unmanned Aerial Vehicles) have been developed and are actively operating around the world if the flight operation of manned aircraft is restricted, such as in environments that are too dangerous, messy or boring for the military to perform directly. The system of unmanned aerial vehicles, which has been researched and developed in Korea, includes Air Vehicle Test Equipment(AVTE). AVTE is equipment that is connected to an UAV to check its status and allows the operator to check its flightability by issuing an operational command to the UAV and verifying that it follows the command values. This study conducts fault finding on the phenomenon where the AVTE has stopped operating due to engine noise during these operations and analyzes the cause in terms of software, hardware and external environment. Present improvement measures according to the cause are analyzed and the results of verifying that the proposed measures can prevent failure are addressed.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.12
• /
• pp.224-232
• /
• 2009

Power plant start-up is a complicate process involving hundreds of operations that should be performed either automatically or manually. Several major operations should be proceeded in parallel and each major operation is again broken down into detailed operations that must be carried out in a strict sequence. Even though most of the operations are automated, still substantial portions of the operations are carried out manually and the operational status should be monitored by the crew members, which are quite stressful tasks to be performed in real time. In this paper, a data structure called an Event Sequence Monitoring Graph(ESMG) is proposed for monitoring a sequence of events involved in the power plant start-up process. The ESMG is currently being applied to a thermal power plant with a rated output of 500MW. An application example is shown with the boiler feed water pump system start-up process, which exhibits a good potential for future applications.

• Journal of Navigation and Port Research
• /
• v.37 no.6
• /
• pp.581-586
• /
• 2013

The sea traffic volume in Southwest sea including Wando area have increased every year. However the improvement of the facilities for convenience and safety in port and sea was not enough to meet the increasing demand of traffic and passengers' need. This study dealt with the situations and status of passenger ship traffic system in Wando area. In addition to, questionnaire survey of passenger ship user in Wando area was carried out in order to research the improvement of marine traffic system. On the basis of the result, navigation risks in the area was analysed. The institutional system such as passenger ship fare, enhanced traffic system that can improve marine traffic environment in the area were suggested and examined. The urgent issue was the scattered fishing ground near fairway which makes narrow passage and can cause risky passeger ship's navigation. In the side of passeger ship's operation, the wage of cargo handling was relatively expensive that needed to be improved.

• Journal of Navigation and Port Research
• /
• v.41 no.5
• /
• pp.353-358
• /
• 2017

This study aims to propose an assessment tool of port service quality (PSQ) in the context of container transport logistics (CTLs), by taking the perspectives from port users. The CTLs defined in this study are the relevant activities of serving the physical flows of a container box from a point of origin via a container port to a point of destination. To address the ports' role in collaboration between its channel members in CTLs, the PSQ measures for all port user groups (i.e. common PSQ measures) are selected based on the relevant CTLs activities involved by port, and its users within terminal/port area as well as throughout the CTLs chain. An importance-performance analysis (IPA) is applied as a diagnostic tool to analyse the status quo of Busan Port in CTLs contexts, by comparing the importance and performance (IP ) scores against each individual CTLs criterion. The findings from the IPA reveal that port managers and policy makers at the Busan Port should concentrate on six PSQ measures (i.e. SR1, SR4, ITS1, VAS1, VAS4, ICI3) to enhance PSQ in CTLs. However, four measures (i.e. ITS2, ITS3, ITS4, VAS2) are identified as a possible overkill, indicating an area of inefficiency where a remedial action of the cost-cutting decision is necessary. On the other hand, the Busan port shows an outstanding performance on four measures such as SR2, SR3, ICI1 and ICI2. The measures are not only important but also high performance. The study findings provide managerial guidance to port managers in Busan Port, in view of searching for managerial and operational strategies for sustainable port growth.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.3
• /
• pp.506-512
• /
• 2018

Unmanned aerial vehicles(UAVs) operating in the military for various purposes are designed to transmit information collected according to the purpose to GCS(Ground Control System), and to transmit/receive the vehicle's operational control and status information using wireless communication(or datalink). Currently, the military UAV systems in operation in Korea use unique communication methods, protocols, and message structures for each system. Among these, the Division UAV is designed to transmit fixed size TM/TC data repeatedly and the Corps UAV is designed to transmit aperiodic TM/TC data to the variable length of the message-based. In this paper, we analyze the TM/TC data protocol of existing military UAV systems and present data protocol design method which is considered to be more efficient in wireless communication environment applied to equipment under development. And we will discuss issues to be considered for standardization of technology for ensuring interoperability with many UAVs or newly introduced UAV systems.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.4
• /
• pp.61-65
• /
• 2019

This study analyzed the post-training satisfaction level and changes in their thinking of 202 maladjusted soldiers who participated in Green Camp from 2017 to 2018 through survey, and the operational status of Green Camp to 350 military officials. In addition, general matters of military official, matters concerning soldiers entering the Green Camp, matters concerning the use of the Green Camp, and matters related to the consultation of soldiers in their relevant units were analyzed through technical statistics. On March 17, 2019, the Department of Defense identified 6,118 98.4% of the 6,214 maladjusted soldiers with active duty failed to complete military service and discharged, among them, 66% or 4,014 reportedly experienced maladjustment. Therefore, it is necessary to earlier identify soldiers who are discharged due to maladjustment, to apply various methods such as education and career guide by civil expert, to conduct timely education through civil professional hospital so that they can complete their military service normally.

• Earthquakes and Structures
• /
• v.17 no.5
• /
• pp.511-519
• /
• 2019

The concrete gravity dam is one of the most important parts of the nation's infrastructure. Besides the benefits, the dam also has some potentially catastrophic disasters related to the life of citizens directly. During the lifetime of service, some degradations in a dam may occur as consequences of operating conditions, environmental aspects and deterioration in materials from natural causes, especially from dynamic loads. Cumulative Absolute Velocity (CAV) plays a key role to assess the operational condition of a structure under seismic hazard. In previous researches, CAV is normally used in Nuclear Power Plant (NPP) fields, but there are no particular criteria or studies that have been made on dam structure. This paper presents a method to calculate the limitation of CAV for the Bohyeonsan Dam in Korea, where the critical Peak Ground Acceleration (PGA) is estimated from twelve sets of selected earthquakes based on High Confidence of Low Probability of Failure (HCLPF). HCLPF point denotes 5% damage probability with 95% confidence level in the fragility curve, and the corresponding PGA expresses the crucial acceleration of this dam. For determining the status of the dam, a 2D finite element model is simulated by ABAQUS. At first, the dam's parameters are optimized by the Minitab tool using the method of Central Composite Design (CCD) for increasing model reliability. Then the Response Surface Methodology (RSM) is used for updating the model and the optimization is implemented from the selected model parameters. Finally, the recorded response of the concrete gravity dam is compared against the results obtained from solving the numerical model for identifying the physical condition of the structure.

• Journal of Korea Port Economic Association
• /
• v.32 no.1
• /
• pp.165-178
• /
• 2016

Container port nowadays becomes one of the most vital link of the transportation chain, plays an important role in trading with other countries. Therefore, evaluating the operational efficiency of container ports to reflect their status and to reveal their position in this competitive environment is very important for port development. Although there have been lots of methods used to measure efficiency in the past, the DEA (Data Envelopment Analysis) model is still the most commonly applied approach. However, the data used in the model sometimes is complex and uncertain to handle using the basic DEA model. In this paper, we applied an uncertainty theory to create an uncertainty DEA model (UDEA), which can solve the limitation of the traditional one. This study mainly focuses on measuring efficiency of 41 container ports by applying proposed an UDEA model. The results show that among 41 container ports, only six container ports are regarded to have efficient operation through the clustering, meanwhile others have technical and scale inefficiencies. We found out that an UDEA model is better to analysis efficiency than existing DEA model.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.518-523
• /
• 2008

Using network communication, KTX OBCS is KTX's core device which inspects operation status of various electric equipments and supports driving command, train control, train's maintenance, train crew's driving. Since this device is manufactured as specialized system, being dependent on TGV manufacture specification and France's high speed train operation method, actual technic transfer is difficult. Therefore, there are many difficulties, since most of interface signals are connected with OBCS when function improvement, maintenance, various electric equipments(propulsion control device, auxiliary power supply device, door control device etc.) are replaced with localized ones, which are required in operational view after introduction of KTX. Ergo, this study would like to contribute to function improvement and maintenance's efficiency, furthermore to realize technical independence, escaping from dependency of developed foreign technology in high speed train and electric equipments, through KTX OBCS' function analysis and mutual interface information analysis with peripheral device(driver console, PID system, fault display device, various electric equipments).

• Journal of the Korean Regional Science Association
• /
• v.37 no.3
• /
• pp.47-58
• /
• 2021

In 2010, Busan Metropolitan City established an organization dedicated to urban regeneration. The Sanbok Road Renaissance Project and Hope Village Project are representative urban regeneration projects. Busan Metropolitan City is a leading local government that has expanded community business through urban policies. This study analyzed the operational status and characteristics of community-based community businesses based in Busan Metropolitan City in the early stages of urban regeneration policy. As a result, the direction of community-based community business is 'community empowerment'. However, the project effects such as 'expansion of opportunities for local residents to help each other' and 'residents' understanding of the local community' were low. In order to operate a community business, it is important to secure sufficient business capital and secure necessary human resources. In order to revitalize community-based community businesses through urban regeneration policies, it is necessary to convert support into functional organizations of urban regeneration projects rather than expanding subsidies and expand opportunities for business participation.