• International Journal of Railway
• /
• 제1권4호
• /
• pp.149-156
• /
• 2008

During maintenance or construction works in or at the tracks of railways, high risks for passengers and railway staff, especially for the workers on the construction site exist. The high risks result out of the movement of rail vehicles, like trains or construction vehicles, which must be faced by using any available technical and operational technologies for securing them against the environment. Therefore, it is necessary to evaluate the level of protection continuously and to identify new and innovative methods and technologies for the protection of the gang (construction worker, machines and material). Especially on construction sites at line sections with two or more parallel tracks but also with single tracks, there are still a lot of incidents and accidents mostly with seriously injured persons or fatalities. These were mainly gang members that breach the railway-loading gage. By using proper warning or protection systems, the avoidance of such accidents must be achieved. The latest developments. in gang protection systems concern on the one hand fixed barriers in the middle between the construction site and the operated track and on the other hand construction vehicles equipped with automatic warning systems. The disadvantage of such protection methods is that the gang can be warned against an approaching train but a monitoring of the gang members cannot be performed. Only one part of a potential dangerous situation will be detected. If the gang members will overhear the acoustic warning signal of the security staff and the workers will not leave the danger zone in the track, the driver of the approaching train had no chance to react to the dangerous situation. An accident is often inevitable. While the detection of acoustic warning signals by the gang members working on a construction site is very difficult, the acoustical planning of an automatic warning system has to be designed for an acoustic short range level of one meter besides the construction vehicle. The decision about the use of today's technical warning system (fixed systems, automatic warning systems, etc.) must be geared to the technical feasibility and the level of safety which is needed. Criteria for decision guidance to block a track should be developed by danger estimation and economical variables. To realize the actual jurisdiction and to minimize the hazards of railway operations by the use of construction vehicles near the tracks further developments are needed. This means, that the warning systems have to be enhanced to systems for protection, which monitor the realization of the warning signal as a precondition for giving a movement authority to a train. This method can protect against accidents caused by predictable wrongdoing. The actual state of the art technique of using a collective warning combined with additional security staff is no longer acceptable. Therefore, the Institute of Transportation System of the German Aerospace Center in Braunschweig (Germany) will develop a gang warning and protection system based upon imaging methods, with optical sensors such as video in visible and invisible ranges, radar, laser, and other. The advantage of such a system based on the possibility to monitor both the gang itself and the railway-loading gauge either of the parallel track or of the same track still in use. By monitoring both situations, the system will be able to generate a warning message for the approaching train, that there are obstacles in the track, so that the train can be stopped to prevent an accident. And also the gang workers will be warned, while they breach their area.

• Journal of Navigation and Port Research
• /
• 제41권6호
• /
• pp.373-380
• /
• 2017

Operational errors caused by human factors, which is the major cause of marine accidents, include lack of knowledge, misunderstanding knowledge, and inadequate procedures. Recently, the type of propulsion mounted on KCG cutters has been diversified. In particular, the water jet propulsion unit, which was mainly installed in small boats, have been gradually expanded to medium and large size Coast Guard cutters, reaching 50% of the total. Axes types are divided into 2 to 4, and the bucket types are divided into Double Reverse Bucket(DRB) and Single Reverse Bucket(SRB); in these, the backward and steering control methods are completely different. Diversification of these operating systems can increase factors causing human error by the ships' operators. However, there is a lack of research on the maneuvering methods, considering the inherent active characteristics of each type of water jet. In this paper, we analyze the sideway method suitable for the condition of Coast Guard Exclusive wharf without assistance, based on the astern performance of each type. Then, a ship handling simulator was used for the experiment; they compared and verified through interviews of captains.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• 제9권2호
• /
• pp.113-119
• /
• 2011

Safe operation and maintenance of engineered dry storage systems for spent fuel from nuclear power plants basically depends on adequately adopted design requirements. The most important design target of the system are those which provide the necessary assurances that spent fuel can be received, handled, stored and retrieved without undue risk to health and safety of workers and the public. To achieve these objectives, the design of the system incorporates features to remove spent fuel residual heat, to provide for radiation protection, and to maintain containment over the lifespan of the system as specified in the design specifications. The features also provide for all possible anticipated operational occurrences and design basis events in accordance with the design basis as guided by the designated regulations. The general performance requirements of a projected storage system are introduced in this paper. The storage system is designed to store fuel assemblies in associated with designated regulatory requirements. Small increases/decreases in maximum burnup can be adjusted with cooling time. These variations are compensated for by a corresponding small site-specific increase/decrease in the design basis-cooling period, as long as the maximum heat load and radioactivity of loaded fuel assemblies are met. Generic design basis events considered for the storage system are summarized. Shielding and radiological requirements along with mechanical and structural are derived in this study.

• Journal of Korean Society of Transportation
• /
• 제31권5호
• /
• pp.3-15
• /
• 2013

The purpose of this study is to propose a methodology for operating variable speed limit (VSL) strategies in freeway work zones. A notable feature in this study is to incorporate a multi-criteria decision making process into deriving better VSL strategies. Decision criteria in this study include operational efficiency, safety, and environmental impacts. Travel speed, acceleration noise, and CO2 were used as performance measures for evaluating VSL strategies. A multi-criteria value function was developed through an analytical hierarchical process (AHP) for representing expert's knowledge. Then, a variety of VSL operations scenarios were investigated utilizing a microscopic traffic simulation suite, VISSIM. The proposed methodology would be useful in supporting more efficient, safer, and more environment-friendly traffic operations and control in freeway work zones.

• Korean Security Journal
• /
• 제57호
• /
• pp.137-156
• /
• 2018

The purpose of this study is to analyze the current status of counter terrorism system and to identify the causes of problems and to suggest alternatives by selecting legal and operational sectors based on theories of open systems and integrated systems. According to the results of the research, first, the degree of agreement on the open system and the integrated system is low with regard to the characteristics of the counter-terrorism system. Second, in relation to the importance and necessity of major factors of construction and operation of counter-terrorism system, counter-terrorism workers recognize that it is the most important and necessary. In the case of strengthening international cooperative system, the difference of recognition between importance and necessity was the biggest. The importance and necessity of reviewing the Anti-Terrorism Act for the protection of the public and public safety were relatively low, and the cooperation with the private sector showed the lowest importance and necessity. In the case of academic achievement, the average level of high school graduates is higher than that of professional high school graduates. Therefore, this research concludes that counter terrorism operation system with open and integrated system has to be applied to national counter terrorism operation structure in South Korea in increasing the quality and efficiency of nation counter terrorism response capability.

• Journal of Internet Computing and Services
• /
• 제22권1호
• /
• pp.31-39
• /
• 2021

Obtaining delivery addresses from calls is one of the most important processes in TV home shopping business. By automating this process, the operational efficiency of TV home shopping can be increased. In this paper, a method of recognizing and validating road name address, which is the address system of South Korea, from speech oriented text is proposed. The speech oriented text has three challenges. The first is that the numbers are represented in the form of pronunciation. The second is that the recorded address has noises that are made from repeated pronunciation of the same address, or unordered address. The third is that the readability of the resulted address. For resolving these problems, the proposed method enhances the existing address databases provided by the Korea Post and Ministry of the Interior and Safety. Various types of pronouncing address are added, and heuristic rules for dividing ambiguous pronunciations are employed. And the processed address is validated by checking the existence in the official address database. Even though, this proposed method is for the STT result of the address pronunciation, this also can be used for any 3^rd party services that need to validate road name address. The proposed method works robustly on noises such as positions change or omission of elements.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• 제34권3호
• /
• pp.137-149
• /
• 2021

Cable-stayed bridges are infrastructure facilities of a highly public nature; therefore, it is essential to ensure operational safety and prompt response in the event of a collapse or damage caused by natural and social disasters. Among social disasters, impact accidents can occur in bridges when a vehicle collides with a pier or when crashes occur due to aircraft defects. In the case of offshore bridges, ship collisions will occur at the bottom of the pylon. In this research, a procedure to evaluate the structural behavior of a cable-stayed bridge for aircraft impact is suggested based on a numerical analysis approach, and the feasibility of the procedure is demonstrated by performing an example assessment. The suggested procedure includes 1) setting up suitable aircraft impact hazard scenarios, 2) structural modeling considering the complex behavior mechanisms of cable-stayed bridges, and 3) structural behavior evaluation of cable-stayed bridges using numerical impact simulation. It was observed that the scenario set in this study did not significantly affect the target bridge. However, if impact analysis is performed through various scenarios in the future, the load position and critical load level to cause serious damage to the bridge could be identified. The scenario-based assessment process employed in this study is expected to facilitate the evaluation of bridge structures under aircraft impact in both existing bridges and future designs.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• 제21권2호
• /
• pp.62-73
• /
• 2022

As the competition among the autonomous vehicle (AV, here after) developers are getting fierce, Korean government has been supporting developers by deregulating safety standards and providing financial subsidies. Recently, some OEMs announced their plans to market Lv3 and Lv4 automated driving systems. However, these market changes raised concern among public road management sectors for monitoring road conditions and alleviating hazardous conditions for AVs and human drivers. In this regards, the authors proposed a methodology for monitoring road infrastructure to identify hazardous factors for AVs and categorizing the hazards based on their level of impact. To evaluate the degrees of the harm on AVs, the authors suggested a methodology for managing road hazard factors based on vehicle performance features including vehicle body, sensors, and algorithms. Furthermore, they proposed a method providing AVs and road management authorities with potential risk information on road by delivering them on the monitoring map with node and link structure.

• Journal of Navigation and Port Research
• /
• 제46권6호
• /
• pp.562-569
• /
• 2022

The alarm monitoring technology applied to existing operating ships manages data items such as temperature and pressure with AMS (Alarm Monitoring System) and provides an alarm to the crew should these sensing data exceed the normal level range. In addition, the maintenance of existing ships follows the Planned Maintenance System (PMS). whereby the sensing data measured from the equipment is monitored and if it surpasses the set range, maintenance is performed through an alarm, or the corresponding part is replaced in advance after being used for a certain period of time regardless of whether the target device has a malfunction or not. To secure the reliability and operational safety of ship engine operation, it is necessary to enable advanced diagnosis and prediction based on real-time condition monitoring data. To do so, comprehensive measurement of actual ship data, creation of a database, and implementation of a condition diagnosis monitoring system for condition-based predictive maintenance of auxiliary equipment and piping must take place. Furthermore, the system should enable management of auxiliary equipment and piping status information based on a responsive web, and be optimized for screen and resolution so that it can be accessed and used by various mobile devices such as smartphones as well as for viewing on a PC on board. This update cost is low, and the management method is easy. In this paper, we propose CBM (Condition Based Management) technology, for autonomous ships. This core technology is used to identify abnormal phenomena through state diagnosis and monitoring of pumps and purifiers among ship auxiliary equipment, and seawater and steam pipes among pipes. It is intended to provide performance diagnosis and failure prediction of ship auxiliary equipment and piping for convergence analysis, and to support preventive maintenance decision-making.

• Journal of Internet Computing and Services
• /
• 제23권1호
• /
• pp.135-145
• /
• 2022

This paper presented a method to build a predictable smart ammunition logistics system using the 4th industrial technology for ammunition logistics, which is the core functions in the field of defense and logistics. We have analyzed the current level of ammunition logistics with various perspectives such as domestic and overseas logistics policies, technology trends, ammunition logistics characteristics, the smart logistics certification measures by Ministry of Land, Infrastructure and Transport. As a result it is considered that the current ammunition logistics needs needs improvement. To improve this, we presented a direction based on the implications derived after analyzing various ongoing programs such as wired/wireless-based automation, smart ammunition depots, and logistics innovation of the army, navy, and air force that can be applied to the ammunition logistics. In order to implement a data-based smart ammunition logistics management system that can achieve innovation and efficiency of total life cycle while meeting changes in the battlefield environment, we presented 4 objectives such as "automation and modernization of field work", "3D-based storage management & improvement of issuing at war," and "data management for prediction-oriented ammunition management". it is expected that there will be benefits such as improvement of operational continuity, guarantee of ammunition reliability, budget reduction, improvement of inefficiencies such as delay, waiting, and double work, and reduction of accidents.