• 한국시스템다이내믹스연구
• /
• 제12권4호
• /
• pp.125-156
• /
• 2011

The information service management models developed thus far have put their focuses mostly on technical dimensions of information systems (IS), finding their rationale from the goods-dominant logic (GDL) that IS as goods has value in itself. Information systems, however, is nothing more than a mechanism by which value is delivered to the users. According to the service-dominant logic (SDL), value is created and determined not at the time serve is made by the providers but at the time it is consumed by the users. The users therefore should be regarded as active value creators not as passive consumers of the value delivered by the providers. Based on the service-dominant logic, DISQM (Dynamic Information Service Quality Model) is developed. DISQM's backbone is designed in causal loop diagrams referring to and reinterpreting in systems thinking the 'Parasuraman, Zeithaml & Berry's GAP Model' and 'SERVQUAL' as an operational tool for the GAP Model, and the main IS success constructs are mapped onto the model exploiting the 'DeLone & MacLean's IS Success Model'. With VENSIM simulation software, this paper also shows how DISQM works in computer-simulation settings. After confirming DISQM's validity with the base simulation run, two scenarios are developed for the exemplary purpose and tested in terms of IS quality, service quality, and net benefits from the service for the public information service. Implications from the simulation runs are also discussed.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1994년도 춘계학술발표회 초록집
• /
• pp.138-143
• /
• 1994

A simplified steam generator model has been developed for the simulation of the operational transients of CANDU nuclear power plant. For the analysis of the secondary side, a control volume approach is used and the flow conservation equations are applied for each control volume. The typical steam generator control logic such as the level control and the pressure control are incorporated into the steam generator model with appropriate interface conditions. The steam line including ASDV, CSDV, and governor valve also has been modeled. Test results for typical operational transient case show reasonable transient behavior of steam generator in a real time basis, which is promising for a CANDU engineering simulator.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제9권4호
• /
• pp.333-338
• /
• 2009

This paper presents a task-based analysis on the number of independent robotic fingers required for compliant manipulations. Based on the stiffness relation between operational space and fingertip space of a multi-fingered object manipulating system, we describe a technique for modulation of the fingertip stiffness without inter-finger coupling so as to achieve the desired stiffness specified in the operational space. Thus, we provides a guide line how many fingers are basically required for successful multi-fingered compliant tasks. Consequently, this paper enables us to assign effectively the number of fingers for various compliant manipulations by robot hands.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅲ
• /
• pp.1323-1326
• /
• 2003

CORBA has been a popular middleware, but recently Web Services has been emerging as a promising web middleware since it uses Internet established standards such as URL, HTTP, XML, and etc. CORBA uses IDL for describing CORBA object interface and Web Services uses WSDL for its description. Thus, in order to port or integrate CORBA objects into Web Services, one needs to understand the relationship between CORBA IDL and WSDL. In this paper, we analyze IDL and WSDL, and compare between two. It turns out that there exists a direct mapping between two, and that understanding operational environments and logic of two technologies is much more important in converting or integrating CORBA objects into Web services successfully.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.922-927
• /
• 1991

This study is aimed to investigate a design problem of the fuzzy logic controller for the activated sludge process(ASP) in sewage treatment. The modeling technique proposed by Sugeno is used to express the ASP effectively and identification of a fuzzy model of the ASP is carried out utilizing actual operational data obtained from a metropolitan sewage plants. The model-based fuzzy controller is designed by rules generated from the identified ASP fuzzy model. Feasibility of the designed controller is tested through computer simulations.

• 방사성폐기물학회지
• /
• 제15권2호
• /
• pp.161-172
• /
• 2017

중 저준위 방사성폐기물 처분시설의 운영 중 사고로 인한 방사선적 영향을 평가하기 위해서는 운영 중 발생 가능한 사고에 대한 타당성이 입증되어야 한다. 본 논문에서는 처분시설의 운영 중 사고분석 체계를 처분시설의 구성요소에 대한 안전기능분석, 잠재위험요소분석, 위험도분석, 그리고 향후 조치대안으로 사고평가체계를 개선하였다. 이를 위하여 위험도분석에 필요한 설계대안과 관리대안을 추가하여 설계-운영-평가가 연계되도록 하였다. 또한 운영 중 사고의 발생확률과 평가결과의 심각성에 따라 운영중 사고에 대한 분류기준을 제안하여 처분시설 운영 중 대표 사고시나리오에 대한 정당성을 확보하였다. 본 논문의 개선된 평가체계를 우리나라의 2단계 중 저준위 방사성폐기물 표층처분시설에 대한 처분시설 운영 중 사고분석의 사례에 대해 적용하였다.

• 한국산학기술학회논문지
• /
• 제19권6호
• /
• pp.689-695
• /
• 2018

본 연구는 배기가스 기준을 만족하기 위해 차량에 장착된 배기가스 후처리 장치(DPF)의 재생제어 방안에 대한 것이다. DPF는 배기가스에 포함된 입자상 물질(PM)을 포집하기 위한 필터로 DPF에 포집된 PM은 일정 조건에 이르렀을 때 고온의 배기가스로 연소시킨다. 이러한 과정을 재생(Regeneration)이라 하는데 DPF의 정상적인 성능을 위한 필수 과정이다. 재생이 잘 되지 않을 경우, 차량의 성능저하와 심한 경우 차량의 화재로도 이어질 수 있다. DPF의 재생은 제어로직에 의해 수행되는데 재생제어 로직이 차량의 운용특성을 제대로 반영하지 못한 경우 DPF 재생이 이루어지지 않을 수 있다. 그렇기 때문에 전술차량의 운용특성을 파악하여 DPF가 정상적으로 재생될 수 있도록 하는 것이 매우 중요하다. 본 연구에서는 전술차량의 운용 특성과 DPF의 특성을 분석하여 이에 맞는 DPF의 재생 제어 로직을 추가하고자 한다. 더불어 추가된 재생 제어 로직에 따른 운용 시 발생될 수 있는 추가적인 문제점까지 동시에 개선하고자 한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권10호
• /
• pp.3313-3332
• /
• 2022

This study is an investigation into the factors affecting patient dissatisfaction among Saudi hospitals. The selected factors considered for analysis are security of information sharing, operational practices, disruptive technologies, and the ease of use of EHR patient information management systems. From the literature review section, it was clear that hardly any other studies have embraced these concepts in one as was intended by this study. The theories that the study heavily draws from are the service dominant logic and the feature integration theory. The study surveyed 350 respondents from three large major hospitals in three different metropolitan cities in the Kingdom of Saudi Arabia. This sample came from members of the three hospitals that were willing to participate in the study. The number 350 represents those that successfully completed the online questionnaire or the limited physical questionnaires in time. The study employed the structural equation modelling technique to analyze the associations. Findings suggested that security of information sharing had a significant direct effect on patient satisfaction. Operational practice positively mediated the effect of security of information sharing on patient dissatisfaction. However, ease of use failed to significant impact this association. The study concluded that to improve patient satisfaction, Saudi hospitals must work on their systems to reinforce them against the active threats on the privacy of patients' data by leveraging disruptive technology. They should also improve their operational practices by embracing quality management techniques relevant to the healthcare sector.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.131-134
• /
• 2002

In this work, we have developed a systematic way of utilizing the basic design tools for superconductive electronics. This include WRSPICE, XIC, margin program, and L-meter. Since the high performance analog-to- digital converter can be built with Rapid Single Flux Quantum (RSFQ) logic circuits the development of superconductive analog-to-digital converter has attracted a lot of interests as one of the most prospective area of the application of Josephson Junction technology. One of the main advantages in using Rapid Single Flux Quantum logic in the analog-to-digital converter is the low voltage output from the Josephson junction switching, and hence the high resolution. To design an 1-bit analog-digital converter, first we have used XIC tool to compose a circuit schematic, and then studied the operational principle of the circuit with WRSPICE tool. Through this process, we obtained the proper circuit diagram of an 1-bit analog-digital converter circuit. Based on this circuit we performed margin calculations of the designed circuits and optimized circuit parameters. The optimized circuit was laid out as a mask drawing. Inductance values of the circuit layout were calculated with L-meter. Circuit inductors were adjusted according to these calculations and the final layout was obtained.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권4호
• /
• pp.675-687
• /
• 2017

In the aerospace industry, we have produced various models according to operational conditions and the environment after development of the base model is completed. Therefore, when design change is necessary, there are modification and updating costs of the circuit whenever environment variables change. For these reasons, recently, in various fields, system designs that can flexibly respond to changing environmental conditions using field programmable gate arrays (FPGAs) are attracting attention, and the rapidly changing aerospace industry also uses FPGAs to organize the system environment. In this paper, we design the controller area network (CAN) intellectual property (IP) protocol used instead of the avionics protocol that includes ARINC-429 and MIL-STD-1553, which are not suitable for small unmanned aerial vehicle (UAV) systems at the register transistor logic (RTL) level, which does not depend on the FPGA vender, and we verify the performance. Consequentially, a Spartan 6 FPGA model-based system on chip (SoC) including an embedded system is constructed by using the designed CAN communications IP and Xilinx Microblaze, and the configured SoC only recorded an average 32% logic element usage rate in the Spartan 6 FPGA model.