• Journal of Biosystems Engineering
• /
• v.13 no.3
• /
• pp.32-43
• /
• 1988

This study was attempted to investigate the pneumatic separation on separating unit of a combine harvester. The aerodynamic characteristics of threshed materials were analyzed by experiments. The air velocity distribution within the separation chamber was measured for various speeds of the winnower and suction fans to find out the operational and design conditions of the separating unit which would serve for reducing the grain loss from chaff outlet. The results of study arc summarized as follows: 1. Based on the separation curve of threshed materials analyzed, it was shown that three different kind. of materials-kernels, straw chaff, and leaf chaff were as a whole able to be separated pneumatically, regardless of varieties. However, a small amount of the separation grain loss may be expected to occur if the complete separation between kernels and straw chaff would be undertaken because some portion of their separation curve were overlapping. 2. The analysis of air velocity distribution showed that the separation chamber may be divided into two regions, the discharging and separating. The air velocity of the discharging region was 5-15 m/s and that of the separating region 2-5 m/s. 3. The air movement of the separation chamber may be a turbulence flow, being its speed became greater as it moves from the left to the right section of the separation chamber. The equi-speed line. of air flow had a steep gradient in between the discharging and the separation regions. The air velocity in the discharging region was much higher than the terminal velocity of kernels, because of which those kernels appearing in the region could be possibly exhausted as the grain loss from the chaff outlet. 4. The motion trajectory of threshed material in the separating region was dominantly affected by the winnower fan, on the other hand, its motion in the discharging region was affected by suction fan. 5. The grain loss from the chaff outlet was affected greatly by the winnower fan and the trace of kernel movement. It was observed that the optimum working speed to give minimum grain loss from chaff outlet for the combine tested should be maintained at 950~1,150 rpm for the winnower fan and 1,850 rpm for the suction fan. 6. It was shown that a large portion of grain loss from chaff outlet may occur when the kernels may bump against a portion of separation chamber wall and those kernels thus scattered into the discharging region were sucked by the suction fan. It was accordingly recommended that a new design of the wall of separation chamber so as to bump down kernels may be necessary to reduce grain loss from the chaff outlet.

• Korean Journal of Food Science and Technology
• /
• v.23 no.1
• /
• pp.81-87
• /
• 1991

To examine the effect of the individual operational variables on extrusion process, test trials of the fractional factorial design of the three process variables at three levels, including feed rate, screw speed and die openings, were carried out by using a laboratory scale twin-screw extruder with three different screw configuration for corn grit with the water addition fixed at 15% of the powder feed rate. As the increase of feed rate, while extrusion temperature(ET), specific mechanical energy input (SME), and residence time(RT) were showed the tendency to decrease, extrusion pressure(EP) was increased and as the increase of screw speed, ET, SME and EP were showed the tendency to increase, but RT was decreased. However, as increase the number of die hole, all system parameters were showed the tendency to decrease. The influence of the change in each process parameters was increased as the increase of the number of reverse element in screw configuration. In case of using the screw configuration with increasing number of reverse element at the condition of same process parameters, ET, SME and RT was increased, but EP was decreased. The functional relationships of the system parameters to the process parameters can be quantified by using multiple regression equations(mostly R-sq>0.90) and maped on suface response diagrams to expedite evaluation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.6
• /
• pp.639-646
• /
• 2016

In order to establish an operational standard based on ship size, this study considered a specific safety management plan for Ulsan along with international standards, analyzed the results of mooring safety assessment at four vulnerable piers and suggests cargo stoppage and emergency unberthing standards as follows. In accordance with ship characteristics, ships of less than 10,000 tons are recommended to limit their activities for wind speeds of 18-21 m/s and wave heights of 1.0-1.5 m. Ships from 10,000-50,000 tons are recommended to observe wind speeds of 17-20 m/s and wave heights of 1.2-1.5 m, while, ships of 50,000-100,000 tons are recommended wind speeds of 15-19 m/s and wave heights of 1.5 m. Ships of more than 100,000 tons are recommended wind speeds of 14-18 m/s and wave heights of 1.5 m.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.6
• /
• pp.887-895
• /
• 2019

Recently, the number of underground road development projects has been increasing to solve traffic problems in the national capital region and metropolitan areas with intensified overcrowding, and there has been a tendency to plan underground roads by applying a double-deck tunnel technology that has advantages in constructability and economical efficiency. The double-deck tunnel has a structure where one excavation section is divided into two parts and used as up and down lines, and is mainly used as a road for small vehicles only due to its low floor height. In addition, due to the small cross-sectional area, it has characteristics different from those of general road tunnels in terms of ventilation and disaster prevention. In this regard, this study proposed an operational plan that applies an oversized exhaust system, which is one of semi-transverse ventilation systems, to small cross-sectional tunnels like double-deck tunnel with low floor height, and a comparative analysis between smoke exhaust characteristics according to the fire occurrence locations and oversized exhaust systems was conducted using the Fire Dynamics Simulator (FDS). The results showed that unlike uniform exhaust, intensive smoke exhaust using the oversized exhaust port maximized the delay effect of smoke diffusion and limited the smoke within 50 m above and below the fire point.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.5
• /
• pp.255-268
• /
• 2016

Climate change has increased the need to secure a new water resource in addition to the traditional water resources such as surface water and ground water. The seawater desalination market is growing sharply in accordance with this situation in Korea, "seawater engineering & architecture of high efficiency reverse osmosis (SEAHERO)" program was launched in 2007 to keep pace with world market trend. SEAHERO program was completed in 2014, contributed to turn the domestic technology in evaporative desalination technology to RO desalination technology. Currently, it is investigated that the average specific energy consumption of the whole RO plant is around $3.5kWh/m^3$. The Busan Gi-jang plant has shown $3.7{\sim}4.0kWh/m^3$, including operational electricity for plant and maintenance building. Although not world top level, domestic RO technology is considered to be able to compete in desalination market. Separately, many researchers in the world are developing new technologies for energy savings. Various processes, forward osmosis (FO), membrane distillation (MD) process are expected to compete with RO in the future market. In Korea, FO-RO hybrid process, MD and pressure retarded osmosis (PRO) process are under development through the research program in Ministry of Land, Infrastructure and Transport (MOLIT). The desalination technology level is expected to decrease to $2.5kWh/m^3$.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.11 no.1
• /
• pp.55-62
• /
• 2008

This study investigated the status and problems of marine-related environmental impact assessment and a utilization-consultation system in Korea and suggested improvement of the review organization. Also, it conducted SWOT analysis based on evaluation of functions, roles and performance of the marine environmental impact assessment center and proposed development strategies of the center through introduction of expert opinions and advanced systems. The performance statement-review by the center in 2007 included 358 cases in total; 165 (46.1%) for consultation on utilization of sea area, 104 for environmental impact assessment (29.0%), and 89 (24.9%) for prior environmental review. The consultation on utilization of sea area can be divided into that for public water surface-use (41%) and reclamation (32%), and sea aggregate extraction process (21%). Although bad impacts on marine environment are reducing under the current system, there are some limits and problems to supplement it in terms of content, system and operation. Review system on sea area utilization-impact(marine environmental impact assessment center) by marine environmental management law needs to obtain expertise, fairness and efficiency and, to do so, have operational supports and institutional improvement to maximize its own functions and roles. At the same time, it is necessary for the center to establish identity and the status as a professional review organization by setting active development strategies inside the center. Finally, it should strengthen an consultation system of marine environmental impact assessment led by the related ministry to achieve effective coastal management.

• Journal of Satellite, Information and Communications
• /
• v.3 no.1
• /
• pp.41-47
• /
• 2008

Line-of-sight communications cannot easily support korean armed forces because of mountainous terrain. ADD(Agency for Defense Development) introduced ANASIS(Army Navy Air-force Satellite Information System) to meet the Korean warfighter's operational needs. Currently, army's military satcom terminal is designed for either fixed site or on-the-pause operation. The US army is under development of multi-band integrated on-the-move satellite terminals to let the army's communication capability to keep pace with globally deployable Joint Task Force for network-centric application. In this paper we analyzed X-band and Ka-band link and subsystem requirement. Our focus here is to describe key technical issues. Especially, On the basis of 3dB beam width of 0.9m antenna, Tracking accuracy and disturbances compensation signal processing on-the-move of Antenna Tracking system is analyzed. Also, protocol is analyzed that minimize blockage on the move due to an obstacle. when the received signal blocked, it stop to transmit burst signal and retransmit when blockage removed through received synchronization signal monitoring. Analyzed specification will be used to make prototype terminal to analyze risk for mass production

• Journal of Satellite, Information and Communications
• /
• v.8 no.4
• /
• pp.150-158
• /
• 2013

In Korea, the official monitoring of the atmospheric re-entry of satellites or space debris was initiated by the first operation of a re-entry situation analysis team for the 'Cosmos 1402' of the Soviet Union, which main body re-entered on January 23, 1983 and radio active core re-entered on February 7, 1983. After this incident, a task force team consisting Korea Astronomy and Space Science Institute (KASI), Korea Aerospace Research Institute (KARI) and other related institutes operated a situation monitoring group under the supervision of the Ministry of Science and technology (MOST) for the controlled re-entry of the Russian 'Mir' space station in 2001. The re-entry of the upper atmospheric weather satellite 'UARS' of United States had been monitored and analyzed by KASI on September 24, 2011. As the re-entry of the space object has been frequently occurred, the government officials and the experts from MEST (Ministry of Education, Science and Technology), KASI, KARI had an urgent official meeting to establish a satellite re-entry monitoring room in KASI and to give an operational authority to KASI in September 14, 2011. Under this decision, the satellite re-entry monitoring room in KASI has successfully executed the monitoring, data analyzing, official reporting, media contacting, and public announcing for the German satellite 'Roentgen' in October 2011, Russian space explorer 'Phobos-Grunt' in January 2012, Russian satellite 'Cosmos 1484' in January 2013, and European geodetic satellite 'GOCE' in November 2013 with the support from the Korean Air Force and KARI.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.527-536
• /
• 2018

This study examined the success factors of six sigma innovation in small- and medium-sized venture companies. The findings are summarized as follows. The importance of 20 items in a total of 4 factors showed that corporate vision was number one in the manager's support, followed by program composition, passionate support, high performance guarantee, and quality activity continuity. This suggests that all members can operate the program by the structured system with a sense of united goal under the company-offered vision as a community when the goal, idea or vision of six sigma activities are shared to members of the entire organization. In addition, high success can be achieved when supported by company-wide enthusiasm and high compensation for sharers' innovative efforts of six sigma at the same time. Small- and medium-sized venture companies should develop brisk six sigma activities of advanced precision parts in such an environment that the technology competition is becoming increasingly fierce. The six sigma movement should be developed as a niche strategy for small organizations with united vision sharing by company-wide operational commitment and high self-esteem for the organizational characteristics of small- and medium-sized venture companies run by key minority organizations and members.

• Proceedings of KOSOMES biannual meeting
• /
• 2004.05b
• /
• pp.43-48
• /
• 2004

The development of the traffic system has brought relative reduction in aspect of the cost and time distance on the geographical space. SOC(social overhead capital), an express highway and railroad, has a great and absolute effect on the prosperity of community, As Mokpo is one of the community under the influence q West costal highway express and KTX(Korea Train Express), the number of the tourists visiting city of port like Mokpo has increasing gradually, especially at the high-demand season(in Summer). But the coastal passenger boot can't be capable of customers arriving at the port. As a result of this situation, the 'balking' occurs. No 'balking', means the jam of road. In this thesis, by understanding the concept and property of ARENA and simulating operation of coastal passenger boot at Mokpo port, intends to analyze the truth of 'balking' and finds an effective operation method of coastal passenger boot for the solution to the traffic jam. The solution to the jam in the vicinity of port of Mokpo, which try to develop tourism package commodity now, will present the effect of qualitative analysis in giving an opportunity of economic growth of the community, Mokpo.