• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.386-390
• /
• 1998

A master-slave system is proposed as a teaching device for a dual arm robot. The slave robots are remotely controlled by two delta-type master arms. In order to help the operator to observe the target object from the desired position and desired direction, cameras are mounted on a specialized manipulator, Movements of two slave arms are coordinated with that of the cameras. Due to this coordinated movements, the operator needs not to care the geometrical relation between the cameras and the slave robots.

• 대한임베디드공학회논문지
• /
• 제12권5호
• /
• pp.267-275
• /
• 2017

Time of difference of arrival (TDOA) method using passive sonar sensor array has normally been used to estimate the location of a concealed moving target in underwater environment. Particle filter has been introduced for effective target estimation for non-Gaussian and nonlinear systems. In this paper, we propose a GPU-based acceleration of target position estimation using particle filter and propose efficient embedded system and software architecture. For the TDOA measurement from the passive sonar sensor, we use the generalized cross correlation phase transform (GCC-PHAT) method to obtain the correlation coefficient of the signal using FFT and we try to accelerate the calculation of GCC-PHAT based TDOA measurements using FFT with GPU CUDA. We also propose parallelization method of the target position estimation algorithm using the GPU CUDA to update the state of each particle for the target position estimation using the measured values. The target estimation algorithm was verified using Matlab and implemented using GPU CUDA. Then, we realized the proposed signal processing acceleration system using NVIDIA Jetson TX1 as the target board to analyze in terms of the execution time. The execution time of the algorithm is reduced by 55% to the CPU standalone-operation on the target board. Experiment results show that the proposed architecture is a feasible solution in terms of high-performance and area-efficient architecture.

• 한국전자파학회논문지
• /
• 제27권3호
• /
• pp.307-316
• /
• 2016

다층 방어 시스템은 표적의 장거리 조기탐지를 위해 조기 경보 레이다를 활용하고, 정밀 요격 통제를 위해 대공 레이다를 활용하는 방식을 취한다. 그러므로 레이다들 사이에 표적 인계 과정을 필요로 하게 되는데, 추적의 안정화 및 교전 통제를 고려하여 적절한 시점에 표적 인계가 이루어져야 한다. 본 논문에서는 다층 레이다 시스템의 운용 특성을 분석하고, 고속표적에 효과적으로 대응하기 위한 추적 성능 예측 기반의 표적 인계 시점 결정기법을 제안하였다. 또한, 탄도탄 방어 시나리오를 포함하는 통합 시뮬레이터 환경에서 제안 기법을 검증하였다.

• 한국음향학회지
• /
• 제43권3호
• /
• pp.305-313
• /
• 2024

효과적인 양상태 소나 운용을 위해서는 해양환경 요인에 의한 음파전달 특성과 표적의 정보를 반영한 탐지성능 분석이 수행되어야 한다. 하지만 기존의 양상태 소나 탐지성능 분석은 해양환경 및 표적 특성을 고려하지 않거나 단순화되어 수행되었다. 따라서 본 연구에서는 서해와 울릉분지 해역에서 해양환경과 표적의 특성을 고려한 양상태 탐지성능을 산출하였다. 잠수함 형상을 가지는 표적에 대한 양상태 표적강도 도출을 위해 수치해석 모델을 활용하였으며, 모의된 표적강도를 반영하여 신호초과를 계산하였다. 그 결과 송·수신기 위치, 양상태 표적강도에 따라 유의미한 탐지성능 변화가 확인되었다.

• 한국멀티미디어학회논문지
• /
• 제10권12호
• /
• pp.1559-1565
• /
• 2007

The many target-detection methods that use forward-looking infrared (FUR) images can deal with large targets measuring $70{\times}40$ pixels, utilizing their shape features. However, detection small targets is difficult because they are more obscure and there are many target-like objects. Therefore, few studies have examined how to detect small targets consisting of fewer than $30{\times}10$ pixels. This paper presents a small target detection method using clutter rejection with stochastic hypothesis testing for FLIR imagery. The proposed algorithm consists of two stages; detection and clutter rejection. In the detection stage, the mean of the input FLIR image is first removed and then the image is segmented using Otsu's method. A closing operation is also applied during the detection stage in order to merge any single targets detected separately. Then, the residual of the clutters is eliminated using statistical hypothesis testing based on the t-test. Several FLIR images are used to prove the performance of the proposed algorithm. The experimental results show that the proposed algorithm accurately detects small targets (Jess than $30{\times}10$ pixels) with a low false alarm rate compared to the center-surround difference method using the receiver operating characteristics (ROC) curve.

• 한국군사과학기술학회지
• /
• 제14권5호
• /
• pp.904-912
• /
• 2011

In this paper, we have proposed a M&S tool for analyzing detection coverage and target localization in bistatic radar system. The detection coverage determined by radar parameters is meaningful when it satisfies the clear line-of-sight condition. We improved the method to find the minimum altitudes of transmitter and receiver for meeting the condition by considering three-dimensional coverage. Its computational burden is not problematic because the calculation is for maximizing the performance of the radar and does not demand a real-time operation. In addition, target localization on three-dimensional earth model based on the information of the height, longitude, and latitude is proposed instead of the previous unpractical calculation on two-dimensional bistatic plane. Its precalculated result can reduce its computation burden and it is suitable for real-time estimation of target location.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 춘계 학술대회논문집
• /
• pp.70-73
• /
• 2005

The HANARO, multi-purpose research reactor, 30 MWth open-tank-in-pool type, is planning to produce a fission moly-99 of radio isotopes, a mother nuclide of Tc-99m, a medical isotope and is under developing a target handling tool for loading and unloading it in a circular flow tube (OR-5). A guide tube is extended from the reactor core to the top of the reactor chimney for easily loading the target under the reactor normal operation. But active coolant through the core can be quickly raised up to the top of the chimney through the guide tube. The jet flow was suppressed in the guide tube after reducing the inner diameter of a flow restriction orifice installed in the OR-5 flow tube for adding the pressure difference in the flow tube after unloading the target. This paper describes an analytical analysis to calculate the flow distribution in the core of the HANARO after suppressing the jet flow of the guide tube. As results, it was confirmed through the analysis results that the flow distribution in the core of the HANARO were not adversely affected.

• KEPCO Journal on Electric Power and Energy
• /
• 제3권2호
• /
• pp.119-125
• /
• 2017

Regarding the implementation of ROMM project (Rehabilitation, Operation, Maintenance & Management), which is one of overseas development projects, it is very important to diagnose the exact current status of aged thermal power plant. However, when people visit the power plant for the purpose of prediagnosis to implement the ROMM project, most target power plants for diagnosis, in general, are under operation. This can be a big interference factor to diagnose the exact current status of power plants. Therefore, in order to solve such interference factor, based on the 30 years of know-how in the field, the present study has developed a regression curve for a simple life time assessment and the calculation of rehabilitation cost that may be used as a reference relatively for the quantitative diagnosis on the status of a relevant power plant even during the operation of the power plant.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.492-494
• /
• 1999

To improve safety operation of urban transit, compatible design of signaling system is most important factor at future train operation and management. Therefore, signaling system should be designed compatible transport demand of target year. In addition, signaling system should be designed improved train safety, based fail-safe principle. Most of all, to solve passenger concentration, high density and to improve efficiency of train operation. Headway improvement of train is most important. Train organization length of new urban transit as light rail is generally shorter than EMU. Therefore, to increase passenger service and operation efficiency, minimum headway of one minute in this system should be important required.

• Industrial Engineering and Management Systems
• /
• 제11권1호
• /
• pp.103-113
• /
• 2012

A yard in a container terminal is a temporary storage space before containers are loaded onto the target vessel or delivered to consignees. For improving the utilization of the space in the yard and the efficiency of loading and discharging operations, it is important that operation plans must be carefully constructed in advance. A heuristic method is suggested to solve operation space planning problems considering workloads on handling equipment as well as space availabilities. The operation plans in this paper includes quay crane (QC) schedules and space plans for multiple vessels considering the workload in the container yard of container terminals. This paper evaluates the effectiveness of a space planning method and the performance of a new QC scheduling method using a simulation model.