• Journal of Korean Clinical Health Science
• /
• v.2 no.1
• /
• pp.1-16
• /
• 2014

Purpose. For a more efficient hospital management, this study aims to provide basic data so that the hospital management and staff in charge of hospital administration may systematically classify and collect hospital information, by analyzing the ordinary characters of an upper-level general hospital system and its common-type balance sheet, common-type profit and loss statement and financial ratio. Methods. By using information about an upper-level general hospital in C Province, provided by Alio(www.alio.go.kr), a public organization information provision site, Health Insurance Review & Assessment Service(www.hira.or.kr) and Ministry of Health and Welfare(www.mw.go.kr), this study analyzed 3 year's data from 2010 to 2012 and provided basic data by analyzing the ordinary characters of an upper-level general hospital system, and its common-type balance sheet, common-type profit and loss statement and financial ratio. Results. After analyzing the ordinary characters, common-type balance sheet, common-type proft and loss statement and financial ration of this general hospital, based on the 2010 to 2012 data, this study came to the following conclusions. Firstly, out of all the 1,069 hospital staff, there were 272 doctors working for 24 medical departments, out of whom the majority was 33 physicians. Most of the nurses were third-class ones, and about 2,000 outpatients and 600 inpatients on average were treated per day. Secondly, as a result of analyzing the common-type balance sheet, this study discovered that intangible assets out of fixed assets accounted for 41%, the majority, out of which usable and profitable donation asset buildings were of great importance, and the liquid assets increased more in 2012 than 2011. In the financial structure, the ratio of liquid liabilities was over 50% out of all the liabilities in 2012, and the ratio of purchase payables was high as well. The ratio of fixed liabilities reached up to 40%, out of which the retirement benefit appropriation fund was quite high. The capital was over 80%, but the surplus was in a deficit state. Compared to the capital, the ratio of total liabilities was about 90%, which indicates the financial structure of this general hospital was vulnerable. Thirdly, as a result of analyzing the common-type profit and loss statement, this study found out that the medical profits from inpatients were higher than profits from outpatients. The material cost was related to the medical quality of this general hospital, and it was as high as 30% out of the total costs and was about 45% of the labor cost. This general hospital showed 10% in the ratio of non-medical profits, and it seemed because of government subsidies. The ratios of medical profits and current net income were gradually changing for the better in 2012, compared to 2011. Lastly, as a result of analyzing the financial ratio, it was found that the liquidity ratio kept decreasing, from 110.7% in 2010 and 102.0% in 2011 to 77.2% in 2012. Besides, it was analyzed that the liquidity ratio and the net working capital ratio greatly decreased, while the quick ratio and the liquid ratio kept decreasing. Conclusions. 1. It is necessary to take the risk management into more consideration, and particularly, it is needed to differentiate and manage the levels of risk in detail. 2. By considering the fact that investments into hospital infrastructures were mostly based on liabilities, it is needed to deal with the scale of losses when evaluating risks. 3. By reflecting the character that investments into hospital infrastructures were based on liabilities, it is necessary to consider the ratio of ordinary profits as well as the ratio of operating profits to sales, and it is also important to consider sales productivity factors, such as the sales amount per a sickbed, by comparing them with other hospitals. As for limitations of this study, there may be some problems in terms of data interpretation because of the lack of information about the number of inpatients and the number of outpatients per year, which are needed for the break-even point analysis. Besides, to suggest a direction for the improvement of hospital management through analyses, non-financial factors should be reflected, such as the trend of economy, medical policies, and politic backgrounds. However, this study only focused on the common-type balance sheet, common-type profit and loss statement and financial ratio, so this study is actually limited to generalizing all the factors by analyzing public data only.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.10B
• /
• pp.946-961
• /
• 2008

This study aims to provide guidelines on future policy for restructuring the scheme of aid programs associated with If small and medium-sized enterprises (i.e. SME) in Korea. For this purpose, we investigate an empirical dataset of recent aid programs deployed by Ministry of Information and Communication (i.e. MIC) for the last four years First, it is examined that the programs are practiced in accordance with their own policy objective by comparing matching samples between two groups such as program beneficiary and non-beneficiary companies. Second, positioning transition of programs within a same category is visualized in terms of two business portfolio analysis matrices. Third, an affiliation network matrix of (he programs is newly developed and then we attempt to analyze the programs relationship by the application of multidimensional scaling method to the affiliation network matrix. The empirical dataset is composed of two different kinds of corporate datasets. One is a corporate dataset of 8,994 beneficiary companies that are aided by MIC during the year of '03-'06. The other is also a corporate dataset of 18,354 non-beneficiary companies that have no records of the program supports during the years at all. Particularly, the matching samples of non-beneficiary companies are prepared in order to have comparable corporate age years (i.e. CAY) against beneficiary companies' CAY. Results show that; 1) up-to-date, the programs are properly assigned to IT SME conforming to their own policy objective; 2) however, as the year goes on, the following two distinct positioning transitions are revealed such as (1) both CAY and corporate sales (i.e. SAL) are increased simultaneously, (2) ratio of intangible assets (i.e. RIA) is decreased and ratio of operating gain to revenue (i.e. ROR) is increased. Hence, the role of the programs gets weakened with regard to providing seed money to technology innovation-typed IT SME so that a managerial adjustment of the programs is required consequently; 3) even though the model adequacy is not satisfactory through the analysis of multidimensional scaling method, the relationship of indirect-typed programs can relatively be stronger than that of direct-typed programs.

• Journal of dental hygiene science
• /
• v.7 no.3
• /
• pp.153-159
• /
• 2007

To investigate requirements for the process of credit bank system in life-long education institutions attached to colleges, this research was conducted with seniors at the departments of dental hygiene and dental laboratory technology, in the health line of the specific College from March 26 to April 15, 2007, followed by analysis using an SPSS/WIN 12.0 program, obtaining the following results. 1. 89.7% of the respondents had a plan to take a bachelor's degree and 56.1% of whom had such a plan for the purpose of personal development (p<0.05). 2. 73.5% of the respondents preferred the credit bank system in a lifelong education institution attached to a college to take a bachelor's degree. 3. 34.8% presented the greatest advantage of taking a bachelor's degree through the credit bank system that they could take a degree in a short period of time while 33.8% presented the most serious disadvantage that they might low social recognition. 4. As for requirements for the process of operating the credit bank system, 80.3% regarded required subjects for the major as appropriate basic ones. 79.9% regarded it as proper that filling more than 20 credits made it possible to take a degree. 5. As directions for improving the system, it was found that the students was thinking that strict academic record management is needed, and the degrees from the system must be recognized equally to those in regular colleges, social awareness in those degrees should be enhanced, and also credits assigned to cultural subjects should be reduced, and the limitation in the number of credits being able to be obtained in one center should be removed.

• Clean Technology
• /
• v.26 no.2
• /
• pp.102-108
• /
• 2020

In recent years, packed column has been widely used in separation processes, such as absorption, desorption, distillation, and extraction, in the petrochemical, fine chemistry, and environmental industries. Packed column is used as a contacting facility for gas-liquid and liquid-liquid systems filled with random packed materials in the column. Packed column has various advantages such as low pressure drop, economical efficiency, thermally sensitive liquids, easy repairing restoration, and noxious gas treatment. The performance of a packed column is highly dependent on the maintenance of good gas and liquid distribution throughout a packed bed; thus, this is an important consideration in a design of packed column. In this study, hydraulic pressure drop, hold-up as a function of liquid load, and mass transfer in the air, air/water, and air-NH₃/water systems were studied to find the geometrical characteristic for raschig super-ring experiment dry pressure drop. Based on the results, design factors and operating conditions to handle noxious gases were obtained. The dry pressure drop of the random packing raschig super-ring was linearly increased as a function of gas capacity factor with various liquid loads in the Air/Water system. This result is lower than that of 35 mm Pall-ring, which is most commonly used in the industrial field. Also, it can be found that the hydraulic pressure drop of raschig super-ring is consistently increased by gas capacity factor with various liquid loads. When gas capacity factor with various liquid loads is increased from 1.855 to 2.323 kg^-1/2 m^-1/2 S^-1, hydraulic pressure drop increases around 17%. Finally, the liquid hold-up related to packing volume, which is a parameter of specific liquid load depending on gas capacity factor, shows consistent increase by around 3.84 kg^-1/2 m^-1/2 S^-1 of the gas capacity factor. However, liquid hold-up significantly increases above it.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.4
• /
• pp.372-380
• /
• 2009

After supercritical water treatment of poplar wood meals (passed through 60 mesh) for 60s between 325 and $425^{\circ}C$ at the fixed pressure at $220{\pm}10atm$, some solid residues were present in the degradation products. They mainly consisted of chemically modified lignin and fibrous materials. Glucose and xylose were identified as main sugar components of fibrous materials, and the highest ratio of glucose/xylose was achieved at the highest reaction temperature. As reaction temperature was elevated, the portion of fibrous materials decreased in the solid residues, while lignin was further accumulated. The H : G : S ratio of lignin in solid residues was estimated by analytical pyrolysis. Irrespective of reaction temperatures, the H:G:S ratios were not significantly changed in the lignin in solid residues. Compared to poplar milled wood lignin (MWL), it was remarkable that H type monomers were further lowered, while portion of S type monomers increased. The amount of G type monomers were relative stable. In presence of HCl catalyst, lowering H type as well as enhancing S type was further distinguishable. According to the result of nitrobenzene oxidation (NBO), ca. 265 mg of vanillin and syringaldehyde was yielded from poplar MWL as main products. However, remarkably reduced amount of NBO products were determined from solid residues by raising operating temperature as well as by the addition of HCl catalyst. These results strongly indicate that $\beta$-O-4 linkage could be easily cleaved during supercritical water treatment, so that the lignins in the solid residues seem to be condensed phenol polymers, which are mainly formed by carbon-carbon linkages rather than $\beta$-O-4 linkage.

• Journal of the Korean Electrochemical Society
• /
• v.23 no.4
• /
• pp.105-112
• /
• 2020

Transition metal oxide, which undergoes a conversion reaction in the negative electrode material for a lithium-ion batteries, has a high specific capacity, but still has several critical problems. In this study, manganese pyrophosphate (Mn₂P₂O₇), nickel pyrophosphate (Ni₂P₂O₇), and carbon composite materials with pyrophosphates as novel negative electrode materials instead of transition metal oxide, are synthesized through simple solid-state reaction. The initial reversible capacity of Mn₂P₂O₇ and Ni₂P₂O₇ are 333 and 340 mAh g^-1, and when the composite materials are composed with carbon, the reversible capacity increases to 433 and 387 mAh g^-1, respectively. The initial Coulombic efficiency is also improved by about 10%. The Mn₂P₂O₇ and carbon composite material has the highest initial capacity and efficiency, and has the best cycle performance. Mn₂P₂O₇ containing polyanion, has a lower specific capacity due to the large mass of polyanion compared to MnO (manganese oxide). However, since Mn₂P₂O₇ shows a voltage curve with a slope, the charging (lithiation) voltage increases from 0.51 to 0.57 V (vs. Li/Li⁺), and the discharge (delithiation) voltage decreases from 1.15 to 1.01 V (vs. Li/Li⁺). Therefore, the voltage efficiency of the cell is improved because the voltage difference between charging and discharging is greatly reduced from 0.64 to 0.44 V, and the operating voltage of the full cell increases because the negative electrode potential is lowered during the discharging process.

• Clean Technology
• /
• v.18 no.4
• /
• pp.390-397
• /
• 2012

Removal characteristics of lead-contaminated soil at the military shooting range located in the Changwon city were studied experimentally using soil washing process. As a washing solution, hydrogen chloride (HCl) concentrations of 0.001, 0.01, 0.1 and 0.2 N were used, and soil : solution ratios were 1 : 2, 1 : 3, 1 : 4, and 1 : 5. Particle diameter of contaminated soil of 4-0.075 mm, and washing period of 5, 10, 15, 20, 30, 60, and 120 min were used as operating parameters. The optimum concentration of HCl solution was 0.1 N (56.3% of Pb removal efficiency) with 15 minutes operation period in views of economics, and the optimum soil : solution ratio was determined as 1 g : 3 mL for 69.7% of Pb removal efficiency with 0.1 N HCl and 15 minutes washing period. As washing period increased, removal efficiency was increased until 20 min of the removal efficiency of 75.3%, and then almost stable. Pb removal efficiency in soil particle diameters of 0.075 mm or more was ranged from 77.0% to 82.0%, but it was decreased to 52.8% in diameter of less than 0.075 mm. Therefore, the optimum cut-off size of the soil particle diameter was found less than 0.075 mm. Combined HCl solution and ultrasonic washing method showed better removal efficiency compared to only water or HCl washing method for particle sizes above 0.075 mm.

• Asia pacific journal of information systems
• /
• v.24 no.4
• /
• pp.611-635
• /
• 2014

Information systems (IS) have become ubiquitous and changed every aspect of how people live their lives. While some IS have been successfully adopted and widely used, others have failed to be adopted and crowded out in spite of remarkable progress in technologies. Both the technology acceptance model (TAM) and the IS Success Model (ISSM), among many others, have contributed to explain the reasons of success as well as failure in IS adoption and usage. While the TAM suggests that intention to use and perceived usefulness lead to actual IS usage, the ISSM indicates that information quality, system quality, and service quality affect IS usage and user satisfaction. Upon literature review, however, we found a significant void in theoretical development and its applications that employ either of the two models, and we raise research questions. First of all, in spite of the causal relationship between intention to use and actual usage, in most previous studies, only intention to use was employed as a dependent variable without overt explaining its relationship with actual usage. Moreover, even in a few studies that employed actual IS usage as a dependent variable, the degree of actual usage was measured based on users' perceptual responses to survey questionnaires. However, the measurement of actual usage based on survey responses might not be 'actual' usage in a strict sense that responders' perception may be distorted due to their selective perceptions or stereotypes. By the same token, the degree of system quality that IS users perceive might not be 'real' quality as well. This study seeks to fill this void by measuring the variables of actual usage and system quality using 'fact' data such as system logs and specifications of users' information and communications technology (ICT) devices. More specifically, we propose an integrated research model that bring together the TAM and the ISSM. The integrated model is composed of both the variables that are to be measured using fact as well as survey data. By employing the integrated model, we expect to reveal the difference between real and perceived degree of system quality, and to investigate the relationship between the perception-based measure of intention to use and the fact-based measure of actual usage. Furthermore, we also aim to add empirical findings on the general research question: what factors influence actual IS usage and how? In order to address the research question and to examine the research model, we selected a mobile campus application (MCA). We collected both fact data and survey data. For fact data, we retrieved them from the system logs such information as menu usage counts, user's device performance, display size, and operating system revision version number. At the same time, we conducted a survey among university students who use an MCA, and collected 180 valid responses. A partial least square (PLS) method was employed to validate our research model. Among nine hypotheses developed, we found five were supported while four were not. In detail, the relationships between (1) perceived system quality and perceived usefulness, (2) perceived system quality and perceived intention to use, (3) perceived usefulness and perceived intention to use, (4) quality of device platform and actual IS usage, and (5) perceived intention to use and actual IS usage were found to be significant. In comparison, the relationships between (1) quality of device platform and perceived system quality, (2) quality of device platform and perceived usefulness, (3) quality of device platform and perceived intention to use, and (4) perceived system quality and actual IS usage were not significant. The results of the study reveal notable differences from those of previous studies. First, although perceived intention to use shows a positive effect on actual IS usage, its explanatory power is very weak ($R^2$=0.064). Second, fact-based system quality (quality of user's device platform) shows a direct impact on actual IS usage without the mediating role of intention to use. Lastly, the relationships between perceived system quality (perception-based system quality) and other constructs show completely different results from those between quality of device platform (fact-based system quality) and other constructs. In the post-hoc analysis, IS users' past behavior was additionally included in the research model to further investigate the cause of such a low explanatory power of actual IS usage. The results show that past IS usage has a strong positive effect on current IS usage while intention to use does not have, implying that IS usage has already become a habitual behavior. This study provides the following several implications. First, we verify that fact-based data (i.e., system logs of real usage records) are more likely to reflect IS users' actual usage than perception-based data. In addition, by identifying the direct impact of quality of device platform on actual IS usage (without any mediating roles of attitude or intention), this study triggers further research on other potential factors that may directly influence actual IS usage. Furthermore, the results of the study provide practical strategic implications that organizations equipped with high-quality systems may directly expect high level of system usage.

• Food Science and Industry
• /
• v.55 no.2
• /
• pp.188-202
• /
• 2022

In the insect industry, as the scope of application of insects is expanded from pet insects and natural enemies to feed, edible and medicinal insects, the demand for quality control of insect raw materials is increasing, and interest in securing the safety of insect products is increasing. In the process of expanding the industrial scale, controlling the temperature and humidity and air quality in the insect breeding room and preventing the spread of pathogens and other pollutants are important success factors. It requires a controlled environment under the operating system. European commercial insect breeding facilities have attracted considerable investor interest, and insect companies are building large-scale production facilities, which became possible after the EU approved the use of insect protein as feedstock for fish farming in July 2017. Other fields, such as food and medicine, have also accelerated the application of cutting-edge technology. In the future, the global insect industry will purchase eggs or small larvae from suppliers and a system that focuses on the larval fattening, i.e., production raw material, until the insects mature, and a system that handles the entire production process from egg laying, harvesting, and initial pre-treatment of larvae., increasingly subdivided into large-scale production systems that cover all stages of insect larvae production and further processing steps such as milling, fat removal and protein or fat fractionation. In Korea, research and development of insect smart factory farms using artificial intelligence and ICT is accelerating, so insects can be used as carbon-free materials in secondary industries such as natural plastics or natural molding materials as well as existing feed and food. A Korean-style customized breeding system for shortening the breeding period or enhancing functionality is expected to be developed soon.

• Journal of Korea Water Resources Association
• /
• v.56 no.11
• /
• pp.775-784
• /
• 2023

With the increasing trend of extreme rainfall that exceeds the design frequency of man-made structures due to extreme weather, it is necessary to review the safety of agricultural reservoirs designed in the past. However, there are no local government-managed reservoirs (13,685) that can be discharged in an emergency, except for reservoirs over a certain size under the jurisdiction of the Korea Rural Affairs Corporation. In this case, it is important to quickly deploy a mobile siphon to the site for preliminary discharge, and this study evaluated the applicability of a mobile siphon with a diameter of 200 mm, a minimum water level difference of 6 m, 420 (m²/h), and 10,000 (m²/day), which can perform both preliminary and emergency discharge functions, to the Yugum Reservoir in Gyeongju City. The test bed, Yugum Reservoir, is a facility that was completed in 1945 and has been in use for about 78 years. According to the hydrological stability analysis, the lowest height of the current dam crest section is 27.15 (EL.m), which is 0.29m lower than the reviewed flood level of 27.44 (EL.m), indicating that there is a possibility of lunar flow through the embankment, and the headroom is insufficient by 1.72 m, so it was reviewed as not securing hydrological safety. The water level-volume curve was arbitrarily derived because it was difficult to clearly establish the water level-flow relationship curve of the reservoir since the water level-flow measurement was not carried out regularly, and based on the derived curve, the algorithm for operating small and medium-sized old reservoirs was developed to consider the pre-discharge time, the amount of spillway discharge, and to predict the reservoir lunar flow time according to the flood volume by frequency, thereby securing evacuation time in advance and reducing the risk of collapse. Based on one row of 200 mm diameter mobile siphons, the optimal pre-discharge time to secure evacuation time (about 1 hour) while maintaining 80% of the upper limit water level (about 30,000 m²) during a 30-year flood was analyzed to be 12 hours earlier. If the pre-discharge technology utilizing siphons for small and medium-sized old reservoirs and the algorithm for reservoir operation are implemented in advance in case of abnormal weather and the decision-making of managers is supported, it is possible to secure the safety of residents in the risk area of reservoir collapse, resolve the anxiety of residents through the establishment of a support system for evacuating residents, and reduce risk factors by providing risk avoidance measures in the event of a reservoir risk situation.