• Journal of Korean Library and Information Science Society
• /
• 제34권1호
• /
• pp.67-90
• /
• 2003

The Ministry of Education and Human Resources Development is propelling the establishment's project of school library digital resource room under recognizing school library is essential facility that it is to educate students to become autonomous and creative person, to embodies a 7th curriculum in the knowledge base society. There is a necessity which it will analyze demonstrative operating school library digital resource room for maximize to educational effect and to establish efficiently. Thus, this study is prepares a foundation of school library informationization as analyzes an operational status and an educational effect with 96 school library digital resource room which are established in tool year.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• 제9권4호
• /
• pp.472-483
• /
• 1997

An experimental facility consisting of two $3{\times}4.4{\times}3.8m$ rooms identical in construction is built. Each room has a control system and storage tank supplying hot water to the radiant floor heating system. The facility enables simultaneous comparision of two different control stratigies each implemented in a separate room. The operating performance of three kinds of flow control scheme is tested and compared in this study : (i) conventional on-off control based on feedback from room air temperature (ii) TPSC(two parameter switching control) (iii) TPOC(two parameter on-off control). Results show that TPSC and TPOC using room air and surface temperature sequentially as feedback signal to control hot water supply is the better temperature regulation scheme than conventional control based on feedback from only room air temperature. They are good candidates for the room with radiant floor heating system under continuous and intermittent heating mode.

• Journal of the Korea Safety Management & Science
• /
• 제3권4호
• /
• pp.53-63
• /
• 2001

The individual rotten water purification tank recently discharges wastewater and sewage through the outlet without purification ability. The outlet water and affiliated water purification tank with microorganism cultivator tank cultivates microorganism and then drops the value BOD, COD of sewage and discharges the quality of water into the outlet. The blower and water pump operating continuously prompts the waste of energy and deterioration of equipment. Each room of deposition tank, foaming tank, microorganism cultivator tank is equipment with the sludge detection senses so it can detect the density of each room. The power-drive plant of the blower and water pump which are the system cultivating the microorganism must be made as fuzzy controlization (If the sludge amount of each room become higher, the rate of operation of blower and water pump must heighten, on the contrary, in case of row sludge amount, the total handling amount and microorganism handling amount of each room of control. Tank reducing the rate of operation must be DB. At present, the blower amount in proportion to the sludge and oxyzen demanding amount has to control. Each room mus be checked outlet level of the outlet, also each room must flow backward discharge materials, and must operate feed-back control until we want to be come as a below value of BOD/COD(10PPM ; KS).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제14권4호
• /
• pp.1781-1791
• /
• 2013

The present study was intended to measure the level of psychosocial stress and fatigue symptom according to the various characteristics such as sociodemographic, health-related, job-related, job stress factors, and psychosocial factors among nurses working at ward and operating room in university hospitals, and to reveal the relation between these factors and psychosocial stress and fatigue symptom. The self-administered questionnaires were given to 220 nurses working at ward, and 147 nurses working at operating room in 4 participating hospitals located in Daejeon City during the period from July 1st to Aug 31st, 2012. As a results, the factors related to the psychosocial stress of nurses working at ward were age, subjective health status, job career, satisfaction of work, fit to the job, job demand, job control, coworker support, self-esteem, locus of control, type A behavior pattern. In operating room, there were age, sleep hours, subjective health status, job career, physical burden of work, satisfaction of work, fit to the job, consider quitting the job, job demand, job control, type A behavior pattern. The factors related to the fatigue symptoms of nurses working at ward were age, leisure time, subjective health status, satisfaction of work, consider quitting the job, job demand, locus of control, type A behavior pattern. In operating room, there were age, subjective health status, physical burden of work, supervisor support, coworker support, locus of control. Based on the study results, we suggest that the factors related to psychosocial stress and fatigue symptom of nurses were different from working station. We need development and application of programs to keep under management psychosocial stress and fatigue symptom.

• The Korean Society of Law and Medicine
• /
• 제22권2호
• /
• pp.111-138
• /
• 2021

'Unlicensed medical practice by a non-medical practitioner' often represented by surrogate surgery or so-called 'ghost surgery,' causes irreparable damage to life or body, and therefore calls for very strict and effective controls. The 'bill on installment of CCTVs in an operating room' to prevent unlicensed surrogate surgery has been discussed for a long time, but due to numerous issues and heated confrontations, it has been pending in the National Assembly. Nevertheless, it is expected that the bill will be discussed again in earnest in the National Assembly because surrogate surgery and factory-type cosmetic surgery, which has been performed mainly in the field of cosmetic surgery, has also been occurring in the field of therapeutic surgery. In general, an operating room is considered as being locked or closed, as well as disallowing implicit complicity among insiders. Hence, if the insiders conspire to commit or cover up an illegal act, or if a surgeon performs rapid cosmetic surgery and then leaves the recipient (or medical institution) so as to perform more operations for profit - even if it is legitimate practice - it may result in serious consequences in terms of the recovery of a patient. In this case, installation of CCTVs can be of great help in identifying an illegal act and assessing any occurrence of negligence. On the other hand, while the fundamental purpose of therapeutic surgery is to restore a patient's life or body - that is, lifesaving - installation of CCTVs may base the relationship between a surgeon and a patient on distrust and surveillance, so it may increase the number of requests for CCTV footage or lead to more disputes, as well as placing a burden on the surgeon when best results are not achieved for a patient. As a result, the surgeon may choose non-invasive treatment contrary to conscience instead of risky but necessary surgery, or he/she may have significant difficulty in determining the timing of surgery, which may limit the provision of effective surgical medical care. Then, in terms of the relationship between a surgeon and patient, and in the long run, there could be significant disadvantages for the public and patients if CCTV footage is allowed. In this paper, we review domestic and overseas cases and issues regarding installation of CCTVs in an operating room, and present various viewpoints and suggestions to promote legislation with minimized legal problems and side effects, thereby contributing to protection of the lives and health of the public, patients, and recipients of surgery.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제17권9호
• /
• pp.329-339
• /
• 2016

The purpose of this study was to investigate the level of job stress and organizational commitment, as well as to identify the factors that influence patient safety management activities among the operating room nurses. Participants were 136 nurses working at 1 university hospital and 9 general hospitals located in G metropolitan city. The data were collected between July 25 and August 7, 2014 using structured questionnaires. Data were analyzed by descriptive statistics, t-test, one-way ANOVA, Pearson's correlation, and multiple regression analysis using SPSS version 21.0. The level of job stress, organizational commitment, and patient safety management activities was 3.76, 3.09, and 4.15, respectively, out of a 5-point scale. Patient safety management activities were significantly correlated with organizational commitment. The significant factors that influence patient safety management activities were organizational commitment and number of patient safety education, which explained 23% of patient safety management activities. In conclusion, organizational commitment and patient safety education have a positive effect on the improvement of patient safety management activities of operating room nurses. It is necessary to develop various intervention programs for operating room nurses to improve organizational commitment and should be reinforced via continuous, systematic patient safety education on patient safety management.

• Journal of the Korean Society of Propulsion Engineers
• /
• 제24권5호
• /
• pp.77-83
• /
• 2020

The operating characteristics of a main oxidizer shut-off valve have been examined by life-cycle tests in which the valve operates as many times as is required at room and cryogenic temperatures. It is shown that there is no significant change of the operating characteristics in the course of the life-cycle tests. The critical pressures and principal forces, which represent the operating characteristics, differ at each operating time by less than about 3%. These qualified operating characteristics of the valve are expected to play an indispensible role in the stable startup and shutdown of a liquid rocket engine.

• Journal of Yeungnam Medical Science
• /
• 제39권3호
• /
• pp.223-229
• /
• 2022

Background: The first large coronavirus disease 2019 (COVID-19) outbreak outside China occurred in Daegu. In response, we developed infection prevention measures for surgical patients during the outbreak at our hospital and retrospectively reviewed the outcomes of COVID-19-related surgical patients. Methods: We reviewed the medical records of 118 COVID-19-related surgical patients and monitored their clinical outcomes until March 31, 2021. We also interviewed healthcare workers who participated in their perioperative care at Kyungpook National University Chilgok Hospital. The perioperative management guidelines for COVID-19-related patients were prepared through multidisciplinary discussions, including the infection control department, surgical departments, and anesthesiology department before and during the COVID-19 outbreak. Results: One standard operating room was temporarily converted to a negative-pressure room by increasing the exhaust air volume, creating a relative pressure of -11.3 Pa. The healthcare workers were equipped with personal protective equipment according to the patient's classification of the risk of COVID-19 transmission. The 118 COVID-19-related patients underwent emergent surgery in the negative-pressure room, including three COVID-19-confirmed patients and five COVID-19-exposed patients. Conclusion: All surgeries of the COVID-19-related patients were performed without specific adverse events or perioperative COVID-19 transmission. Our experience setting up a negative-pressure operating room and conservative perioperative protocol to prevent COVID-19 transmission will help plan and execute infection control measures in the future.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.517-520
• /
• 2008

Recently, use of adhesive bonding technology is increased to achieve the multi-material design for lightweight structure in automobile industry. In this paper, the fracture strength of adhesive has been studied with the single lap shear test conducted at different temperatures. The joint specimens are made from Al 5052 and SPRC 440 bonded with structural epoxy adhesive. The operating temperature has been considered up to $150[^{\circ}C]$ and the single lap shear test has been conducted with 5mm/min tensile rate. Fracture strength of adhesive bonded joint has been decreased with increase of operating temperature. The fracture strength at the $100[^{\circ}C]$ was shown about half of that at room temperature.

• Proceedings of the Safety Management and Science Conference
• /
• 대한안전경영과학회 2001년도 추계학술대회
• /
• pp.193-202
• /
• 2001

The individual rotten water purification tank recently discharges wastewater and sewage through the outlet without purification ability. The outlet water and affiliated water purification tank with microorganism cultivator tank cultivates microorganism and then drops the value BOD, COD of sewage and discharges the quality of water into the outlet. The blower and water pump operating continuously prompts the waste of energy and deterioration of equipment. Each room of deposition tank, foaming tank, microorganism cultivator tank is equipment with the sludge detection senses so it can detect the density of each room. The power-drive plant of the blower and water pump which ate the system cultivating the microorganism must be made as fuzzy controlization (If the sludge amount of each room become higher, the rate of operation of blower and water pump must heighten, on the contrary, in case of row sludge amount, the total handling amount and microorganism handling amount of each room of control. Tank reducing the rate of operation must be DB. At present, the blower amount in proportion to the sludge and oxygen demanding amount has to control. Each mom must be checked outlet level of the outlet, also each room must flow backward discharge materials, and must operate feed-back control until we want to be come as a below value of BOD/COD(10PPM ; KS).